mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jules Maselbas <jmaselbas@kalray.eu>
To: Barebox List <barebox@lists.infradead.org>
Cc: Jules Maselbas <jmaselbas@kalray.eu>
Subject: [PATCH v3 09/14] usb: dwc2: host: Rewrite dwc2_hc_init
Date: Tue, 21 Jul 2020 14:05:55 +0200	[thread overview]
Message-ID: <20200721120600.15114-10-jmaselbas@kalray.eu> (raw)
In-Reply-To: <20200721120600.15114-1-jmaselbas@kalray.eu>

Removed the uses of a table to convert the usb endpoint type for
the controller.

Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
 drivers/usb/dwc2/host.c | 47 +++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
index 98f75744f..c4bc79c99 100644
--- a/drivers/usb/dwc2/host.c
+++ b/drivers/usb/dwc2/host.c
@@ -7,13 +7,6 @@
 /* Use only HC channel 0. */
 #define DWC2_HC_CHANNEL			0
 
-static int dwc2_eptype[] = {
-	DXEPCTL_EPTYPE_ISO,
-	DXEPCTL_EPTYPE_INTERRUPT,
-	DXEPCTL_EPTYPE_CONTROL,
-	DXEPCTL_EPTYPE_BULK,
-};
-
 static int dwc2_do_split(struct dwc2 *dwc2, struct usb_device *dev)
 {
 	uint32_t hprt0 = dwc2_readl(dwc2, HPRT0);
@@ -80,15 +73,32 @@ static void dwc2_hc_enable_ints(struct dwc2 *dwc2, uint8_t hc)
  * @param regs Programming view of DWC2 controller
  * @param hc Information needed to initialize the host channel
  */
-static void dwc2_hc_init(struct dwc2 *dwc2, uint8_t hc,
-		struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
-		uint8_t ep_is_in, uint32_t ep_type, uint16_t max_packet)
+static void dwc2_hc_init(struct dwc2 *dwc2, struct usb_device *dev, u8 hc,
+			 unsigned long pipe, int is_in)
 {
-	uint32_t hcchar = (dev_addr << HCCHAR_DEVADDR_SHIFT) |
-			  (ep_num << HCCHAR_EPNUM_SHIFT) |
-			  (ep_is_in ? HCCHAR_EPDIR : 0) |
-			  ep_type |
-			  (max_packet << HCCHAR_MPS_SHIFT);
+	int addr = usb_pipedevice(pipe);
+	int endp = usb_pipeendpoint(pipe);
+	int type = usb_pipetype(pipe);
+	int mps = usb_maxpacket(dev, pipe);
+	uint32_t hcchar = (addr << HCCHAR_DEVADDR_SHIFT) |
+			  (endp << HCCHAR_EPNUM_SHIFT) |
+			  (is_in ? HCCHAR_EPDIR : 0) |
+			  (mps << HCCHAR_MPS_SHIFT);
+
+	switch (type) {
+	case PIPE_ISOCHRONOUS:
+		hcchar |= DXEPCTL_EPTYPE_ISO;
+		break;
+	case PIPE_INTERRUPT:
+		hcchar |= DXEPCTL_EPTYPE_INTERRUPT;
+		break;
+	case PIPE_CONTROL:
+		hcchar |= DXEPCTL_EPTYPE_CONTROL;
+		break;
+	case PIPE_BULK:
+		hcchar |= DXEPCTL_EPTYPE_BULK;
+		break;
+	}
 
 	if (dev->speed == USB_SPEED_LOW)
 		hcchar |= HCCHAR_LSPDDEV;
@@ -213,10 +223,7 @@ static int dwc2_submit_packet(struct dwc2 *dwc2, struct usb_device *dev, u8 hc,
 			      unsigned long pipe, u8 *pid, int in, void *buf,
 			      int len)
 {
-	int devnum = usb_pipedevice(pipe);
-	int ep = usb_pipeendpoint(pipe);
 	int mps = usb_maxpacket(dev, pipe);
-	int eptype = dwc2_eptype[usb_pipetype(pipe)];
 	int do_split = dwc2_do_split(dwc2, dev);
 	int complete_split = 0;
 	int done = 0;
@@ -237,7 +244,7 @@ static int dwc2_submit_packet(struct dwc2 *dwc2, struct usb_device *dev, u8 hc,
 	max_xfer_len = num_packets * mps;
 
 	/* Initialize channel */
-	dwc2_hc_init(dwc2, hc, dev, devnum, ep, in, eptype, mps);
+	dwc2_hc_init(dwc2, dev, hc, pipe, in);
 
 	/* Check if the target is a FS/LS device behind a HS hub */
 	if (do_split) {
@@ -268,7 +275,7 @@ static int dwc2_submit_packet(struct dwc2 *dwc2, struct usb_device *dev, u8 hc,
 			dwc2_writel(dwc2, hcsplt, HCSPLT(hc));
 		}
 
-		if (eptype == DXEPCTL_EPTYPE_INTERRUPT) {
+		if (usb_pipeint(pipe)) {
 			int uframe_num = dwc2_readl(dwc2, HFNUM);
 
 			if (!(uframe_num & 0x1))
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-07-21 12:06 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 12:05 [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 01/14] Revert "usb: Add dwc2 host driver" Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 02/14] usb: dwc2: Add host controller driver Jules Maselbas
2020-07-22  6:36   ` Ahmad Fatoum
2020-07-22  9:12     ` Jules Maselbas
2020-07-22  9:18       ` Ahmad Fatoum
2020-07-22  9:21         ` Jules Maselbas
2020-08-10 20:26   ` Sascha Hauer
2020-07-21 12:05 ` [PATCH v3 03/14] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 04/14] usb: dwc2: Rework roothub interface Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 05/14] usb: dwc2: Rework timeout Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 06/14] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 07/14] usb: dwc2: host: Dynamic fifo size support from Linux Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 08/14] usb: dwc2: host: Fix toggle reset Jules Maselbas
2020-07-21 12:05 ` Jules Maselbas [this message]
2020-07-21 12:05 ` [PATCH v3 10/14] usb: dwc2: Add function to flush tx fifo Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 11/14] usb: dwc2: Add structure for gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 12/14] usb: dwc2: Add " Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 13/14] usb: dwc2: Use register_otg_device Jules Maselbas
2020-07-21 12:06 ` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function Jules Maselbas
2020-08-10 20:34   ` Sascha Hauer
2020-08-11  9:31     ` Jules Maselbas
2020-08-10 20:23 ` [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721120600.15114-10-jmaselbas@kalray.eu \
    --to=jmaselbas@kalray.eu \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox