From: Jules Maselbas <jmaselbas@kalray.eu>
To: Barebox List <barebox@lists.infradead.org>
Cc: Jules Maselbas <jmaselbas@kalray.eu>
Subject: [PATCH v3 11/14] usb: dwc2: Add structure for gadget driver
Date: Tue, 21 Jul 2020 14:05:57 +0200 [thread overview]
Message-ID: <20200721120600.15114-12-jmaselbas@kalray.eu> (raw)
In-Reply-To: <20200721120600.15114-1-jmaselbas@kalray.eu>
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
drivers/usb/dwc2/core.h | 55 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index a2ec3ff68..b188990a0 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -416,6 +416,49 @@ struct dwc2_hw_params {
#define MAX_DEVICE 16
#define MAX_ENDPOINT DWC2_MAX_EPS_CHANNELS
+struct dwc2_ep {
+ struct usb_ep ep;
+ struct dwc2 *dwc2;
+ struct list_head queue;
+ struct dwc2_request *req;
+ char name[8];
+
+ unsigned int size_loaded;
+ unsigned int last_load;
+ unsigned short fifo_size;
+ unsigned short fifo_index;
+
+ u8 dir_in;
+ u8 epnum;
+ u8 mc;
+ u16 interval;
+
+ unsigned int halted:1;
+ unsigned int periodic:1;
+ unsigned int isochronous:1;
+ unsigned int send_zlp:1;
+ unsigned int target_frame;
+#define TARGET_FRAME_INITIAL 0xFFFFFFFF
+ bool frame_overrun;
+};
+
+struct dwc2_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+/* Gadget ep0 states */
+enum dwc2_ep0_state {
+ DWC2_EP0_SETUP,
+ DWC2_EP0_DATA_IN,
+ DWC2_EP0_DATA_OUT,
+ DWC2_EP0_STATUS_IN,
+ DWC2_EP0_STATUS_OUT,
+};
+
+/* Size of control and EP0 buffers */
+#define DWC2_CTRL_BUFF_SIZE 8
+
struct dwc2 {
struct device_d *dev;
void __iomem *regs;
@@ -429,6 +472,18 @@ struct dwc2 {
u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
int root_hub_devnum;
#endif
+
+#ifdef CONFIG_USB_DWC2_GADGET
+ struct usb_gadget gadget;
+ struct dwc2_ep *eps_in[MAX_ENDPOINT];
+ struct dwc2_ep *eps_out[MAX_ENDPOINT];
+ struct usb_request *ctrl_req;
+ void *ep0_buff;
+ void *ctrl_buff;
+ enum dwc2_ep0_state ep0_state;
+ struct usb_gadget_driver *driver;
+ int num_eps;
+#endif
};
#define host_to_dwc2(ptr) container_of(ptr, struct dwc2, host)
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-07-21 12:06 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-21 12:05 [PATCH v3 00/14] usb: dwc2: Add host and " Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 01/14] Revert "usb: Add dwc2 host driver" Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 02/14] usb: dwc2: Add host controller driver Jules Maselbas
2020-07-22 6:36 ` Ahmad Fatoum
2020-07-22 9:12 ` Jules Maselbas
2020-07-22 9:18 ` Ahmad Fatoum
2020-07-22 9:21 ` Jules Maselbas
2020-08-10 20:26 ` Sascha Hauer
2020-07-21 12:05 ` [PATCH v3 03/14] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 04/14] usb: dwc2: Rework roothub interface Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 05/14] usb: dwc2: Rework timeout Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 06/14] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 07/14] usb: dwc2: host: Dynamic fifo size support from Linux Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 08/14] usb: dwc2: host: Fix toggle reset Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 09/14] usb: dwc2: host: Rewrite dwc2_hc_init Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 10/14] usb: dwc2: Add function to flush tx fifo Jules Maselbas
2020-07-21 12:05 ` Jules Maselbas [this message]
2020-07-21 12:05 ` [PATCH v3 12/14] usb: dwc2: Add gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 13/14] usb: dwc2: Use register_otg_device Jules Maselbas
2020-07-21 12:06 ` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function Jules Maselbas
2020-08-10 20:34 ` Sascha Hauer
2020-08-11 9:31 ` Jules Maselbas
2020-08-10 20:23 ` [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200721120600.15114-12-jmaselbas@kalray.eu \
--to=jmaselbas@kalray.eu \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox