From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
Date: Fri, 24 Jul 2020 13:12:30 +0200 [thread overview]
Message-ID: <20200724111233.23725-1-l.stach@pengutronix.de> (raw)
Without this select the necessary DDR PHY firmware files will be missing
when only building for the i.MX8MM-EVK board.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 6dd5cb2aca15..7617a5ccd4b3 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -515,6 +515,7 @@ config MACH_NXP_IMX6ULL_EVK
config MACH_NXP_IMX8MM_EVK
bool "NXP i.MX8MM EVK Board"
select ARCH_IMX8MM
+ select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
select FIRMWARE_IMX8MM_ATF
select ARM_SMCCC
select MCI_IMX_ESDHC_PBL
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-07-24 11:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-24 11:12 Lucas Stach [this message]
2020-07-24 11:12 ` [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM Lucas Stach
2020-08-03 19:36 ` Sascha Hauer
2020-07-24 11:12 ` [PATCH 3/4] ARM: nxp-imx8mm-evk: always set up UART Lucas Stach
2020-07-24 11:12 ` [PATCH 4/4] nvmem: ocotp: add support for i.MX8MM Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200724111233.23725-1-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox