* [PATCH] image: Convert the IH_... values to enums
@ 2020-08-05 7:32 Antony Pavlov
2020-08-05 7:32 ` [PATCH] riscv: Makefile: make it possible to use riscv64 compiler Antony Pavlov
2020-08-10 6:36 ` [PATCH] image: Convert the IH_... values to enums Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Antony Pavlov @ 2020-08-05 7:32 UTC (permalink / raw)
To: barebox
Adoption of U-Boot commit:
| commit 555f45d8f9168b09b406a241e7cee7980104d902
| Author: Simon Glass <sjg@chromium.org>
| Date: Thu Jun 30 10:52:13 2016 -0600
|
| image: Convert the IH_... values to enums
As a side effect, several new architecture macros
are introduced, especially IH_ARCH_RISCV.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
include/image.h | 188 +++++++++++++++++++++++++++++++++---------------
1 file changed, 132 insertions(+), 56 deletions(-)
diff --git a/include/image.h b/include/image.h
index 0a7832f139..963ea96863 100644
--- a/include/image.h
+++ b/include/image.h
@@ -23,55 +23,83 @@
/*
* Operating System Codes
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_OS_INVALID 0 /* Invalid OS */
-#define IH_OS_OPENBSD 1 /* OpenBSD */
-#define IH_OS_NETBSD 2 /* NetBSD */
-#define IH_OS_FREEBSD 3 /* FreeBSD */
-#define IH_OS_4_4BSD 4 /* 4.4BSD */
-#define IH_OS_LINUX 5 /* Linux */
-#define IH_OS_SVR4 6 /* SVR4 */
-#define IH_OS_ESIX 7 /* Esix */
-#define IH_OS_SOLARIS 8 /* Solaris */
-#define IH_OS_IRIX 9 /* Irix */
-#define IH_OS_SCO 10 /* SCO */
-#define IH_OS_DELL 11 /* Dell */
-#define IH_OS_NCR 12 /* NCR */
-#define IH_OS_LYNXOS 13 /* LynxOS */
-#define IH_OS_VXWORKS 14 /* VxWorks */
-#define IH_OS_PSOS 15 /* pSOS */
-#define IH_OS_QNX 16 /* QNX */
-#define IH_OS_BAREBOX 17 /* Firmware */
-#define IH_OS_RTEMS 18 /* RTEMS */
-#define IH_OS_ARTOS 19 /* ARTOS */
-#define IH_OS_UNITY 20 /* Unity OS */
+enum {
+ IH_OS_INVALID = 0, /* Invalid OS */
+ IH_OS_OPENBSD, /* OpenBSD */
+ IH_OS_NETBSD, /* NetBSD */
+ IH_OS_FREEBSD, /* FreeBSD */
+ IH_OS_4_4BSD, /* 4.4BSD */
+ IH_OS_LINUX, /* Linux */
+ IH_OS_SVR4, /* SVR4 */
+ IH_OS_ESIX, /* Esix */
+ IH_OS_SOLARIS, /* Solaris */
+ IH_OS_IRIX, /* Irix */
+ IH_OS_SCO, /* SCO */
+ IH_OS_DELL, /* Dell */
+ IH_OS_NCR, /* NCR */
+ IH_OS_LYNXOS, /* LynxOS */
+ IH_OS_VXWORKS, /* VxWorks */
+ IH_OS_PSOS, /* pSOS */
+ IH_OS_QNX, /* QNX */
+ IH_OS_BAREBOX, /* Firmware */
+ IH_OS_RTEMS, /* RTEMS */
+ IH_OS_ARTOS, /* ARTOS */
+ IH_OS_UNITY, /* Unity OS */
+ IH_OS_INTEGRITY, /* INTEGRITY */
+ IH_OS_OSE, /* OSE */
+ IH_OS_PLAN9, /* Plan 9 */
+ IH_OS_OPENRTOS, /* OpenRTOS */
+ IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
+ IH_OS_TEE, /* Trusted Execution Environment */
+ IH_OS_OPENSBI, /* RISC-V OpenSBI */
+ IH_OS_EFI, /* EFI Firmware (e.g. GRUB2) */
+
+ IH_OS_COUNT,
+};
/*
* CPU Architecture Codes (supported by Linux)
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_ARCH_INVALID 0 /* Invalid CPU */
-#define IH_ARCH_ALPHA 1 /* Alpha */
-#define IH_ARCH_ARM 2 /* ARM */
-#define IH_ARCH_I386 3 /* Intel x86 */
-#define IH_ARCH_IA64 4 /* IA64 */
-#define IH_ARCH_MIPS 5 /* MIPS */
-#define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */
-#define IH_ARCH_PPC 7 /* PowerPC */
-#define IH_ARCH_S390 8 /* IBM S390 */
-#define IH_ARCH_SH 9 /* SuperH */
-#define IH_ARCH_SPARC 10 /* Sparc */
-#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */
-#define IH_ARCH_M68K 12 /* M68K */
-#define IH_ARCH_NIOS 13 /* Nios-32 */
-#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */
-#define IH_ARCH_NIOS2 15 /* Nios-II */
-#define IH_ARCH_BLACKFIN 16 /* Blackfin */
-#define IH_ARCH_AVR32 17 /* AVR32 */
-#define IH_ARCH_LINUX 18 /* Linux */
-#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */
-#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */
-#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */
-#define IH_ARCH_ARM64 22 /* ARM64 */
+enum {
+ IH_ARCH_INVALID = 0, /* Invalid CPU */
+ IH_ARCH_ALPHA, /* Alpha */
+ IH_ARCH_ARM, /* ARM */
+ IH_ARCH_I386, /* Intel x86 */
+ IH_ARCH_IA64, /* IA64 */
+ IH_ARCH_MIPS, /* MIPS */
+ IH_ARCH_MIPS64, /* MIPS 64 Bit */
+ IH_ARCH_PPC, /* PowerPC */
+ IH_ARCH_S390, /* IBM S390 */
+ IH_ARCH_SH, /* SuperH */
+ IH_ARCH_SPARC, /* Sparc */
+ IH_ARCH_SPARC64, /* Sparc 64 Bit */
+ IH_ARCH_M68K, /* M68K */
+ IH_ARCH_NIOS, /* Nios-32 */
+ IH_ARCH_MICROBLAZE, /* MicroBlaze */
+ IH_ARCH_NIOS2, /* Nios-II */
+ IH_ARCH_BLACKFIN, /* Blackfin */
+ IH_ARCH_AVR32, /* AVR32 */
+ IH_ARCH_ST200, /* STMicroelectronics ST200 */
+ IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */
+ IH_ARCH_NDS32, /* ANDES Technology - NDS32 */
+ IH_ARCH_OPENRISC, /* OpenRISC 1000 */
+ IH_ARCH_ARM64, /* ARM64 */
+ IH_ARCH_ARC, /* Synopsys DesignWare ARC */
+ IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */
+ IH_ARCH_XTENSA, /* Xtensa */
+ IH_ARCH_RISCV, /* RISC-V */
+
+ IH_ARCH_COUNT,
+};
#if defined(__PPC__)
#define IH_ARCH IH_ARCH_PPC
@@ -142,24 +170,72 @@
* barebox's command interpreter; this feature is especially
* useful when you configure barebox to use a real shell (hush)
* as command interpreter (=> Shell Scripts).
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_TYPE_INVALID 0 /* Invalid Image */
-#define IH_TYPE_STANDALONE 1 /* Standalone Program */
-#define IH_TYPE_KERNEL 2 /* OS Kernel Image */
-#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */
-#define IH_TYPE_MULTI 4 /* Multi-File Image */
-#define IH_TYPE_FIRMWARE 5 /* Firmware Image */
-#define IH_TYPE_SCRIPT 6 /* Script file */
-#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
-#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
+enum {
+ IH_TYPE_INVALID = 0, /* Invalid Image */
+ IH_TYPE_STANDALONE, /* Standalone Program */
+ IH_TYPE_KERNEL, /* OS Kernel Image */
+ IH_TYPE_RAMDISK, /* RAMDisk Image */
+ IH_TYPE_MULTI, /* Multi-File Image */
+ IH_TYPE_FIRMWARE, /* Firmware Image */
+ IH_TYPE_SCRIPT, /* Script file */
+ IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */
+ IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
+ IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
+ IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
+ IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
+ IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
+ IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
+ /* OS Kernel Image, can run from any load address */
+ IH_TYPE_KERNEL_NOLOAD,
+ IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */
+ IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */
+ IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */
+ IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */
+ IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA CV/AV Preloader */
+ IH_TYPE_X86_SETUP, /* x86 setup.bin Image */
+ IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */
+ IH_TYPE_LOADABLE, /* A list of typeless images */
+ IH_TYPE_RKIMAGE, /* Rockchip Boot Image */
+ IH_TYPE_RKSD, /* Rockchip SD card */
+ IH_TYPE_RKSPI, /* Rockchip SPI image */
+ IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */
+ IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */
+ IH_TYPE_ZYNQMPBIF, /* Xilinx ZynqMP Boot Image (bif) */
+ IH_TYPE_FPGA, /* FPGA Image */
+ IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */
+ IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
+ IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
+ IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
+ IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
+ IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
+ IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
+ IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
+ IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
+ IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
+
+ IH_TYPE_COUNT, /* Number of image types */
+};
/*
* Compression Types
+ *
+ * The following are exposed to uImage header.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
-#define IH_COMP_NONE 0 /* No Compression Used */
-#define IH_COMP_GZIP 1 /* gzip Compression Used */
-#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
+enum {
+ IH_COMP_NONE = 0, /* No Compression Used */
+ IH_COMP_GZIP, /* gzip Compression Used */
+ IH_COMP_BZIP2, /* bzip2 Compression Used */
+
+ IH_COMP_COUNT,
+};
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] riscv: Makefile: make it possible to use riscv64 compiler
2020-08-05 7:32 [PATCH] image: Convert the IH_... values to enums Antony Pavlov
@ 2020-08-05 7:32 ` Antony Pavlov
2020-08-10 6:36 ` [PATCH] image: Convert the IH_... values to enums Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Antony Pavlov @ 2020-08-05 7:32 UTC (permalink / raw)
To: barebox; +Cc: Masahiro Yamada
At the moment riscv64 toolchain can't be used to build
barebox for riscv32, e.g.
barebox$ make erizo_generic_defconfig
...
barebox$ make
...
riscv64-zephyr-elf-ld:
common/memory.o: ABI is incompatible with that of the selected
emulation:
target emulation `elf32-littleriscv' does not match `elf64-littleriscv'
The patch fixes the problem by explicit riscv32 target options selection.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
---
arch/riscv/Makefile | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index c71319507c..8cd5f51e30 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -3,7 +3,8 @@ KBUILD_DEFCONFIG := erizo_generic_defconfig
KBUILD_CPPFLAGS += -fno-strict-aliasing
ifeq ($(CONFIG_ARCH_RV32I),y)
- cflags-y += -march=rv32im
+ cflags-y += -march=rv32im -mabi=ilp32
+ riscv-ldflags-y += -melf32lriscv
endif
cflags-y += -fno-pic -pipe
@@ -14,6 +15,8 @@ LDFLAGS_barebox += -nostdlib
machine-$(CONFIG_MACH_ERIZO) := erizo
+LDFLAGS_barebox += $(riscv-ldflags-y)
+
TEXT_BASE = $(CONFIG_TEXT_BASE)
KBUILD_CPPFLAGS += -DTEXT_BASE=$(CONFIG_TEXT_BASE)
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] image: Convert the IH_... values to enums
2020-08-05 7:32 [PATCH] image: Convert the IH_... values to enums Antony Pavlov
2020-08-05 7:32 ` [PATCH] riscv: Makefile: make it possible to use riscv64 compiler Antony Pavlov
@ 2020-08-10 6:36 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2020-08-10 6:36 UTC (permalink / raw)
To: Antony Pavlov; +Cc: barebox
On Wed, Aug 05, 2020 at 10:32:57AM +0300, Antony Pavlov wrote:
> Adoption of U-Boot commit:
>
> | commit 555f45d8f9168b09b406a241e7cee7980104d902
> | Author: Simon Glass <sjg@chromium.org>
> | Date: Thu Jun 30 10:52:13 2016 -0600
> |
> | image: Convert the IH_... values to enums
>
> As a side effect, several new architecture macros
> are introduced, especially IH_ARCH_RISCV.
>
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> include/image.h | 188 +++++++++++++++++++++++++++++++++---------------
> 1 file changed, 132 insertions(+), 56 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-08-10 6:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-05 7:32 [PATCH] image: Convert the IH_... values to enums Antony Pavlov
2020-08-05 7:32 ` [PATCH] riscv: Makefile: make it possible to use riscv64 compiler Antony Pavlov
2020-08-10 6:36 ` [PATCH] image: Convert the IH_... values to enums Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox