mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v2 02/13] ARM: dts: imx6: vicut1: fix network support
Date: Wed,  5 Aug 2020 12:16:17 +0200	[thread overview]
Message-ID: <20200805101628.4698-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20200805101628.4698-1-o.rempel@pengutronix.de>

Create the PHY node with properly configured phy-mode and reset lines.
In this case we will not need board specific PHY fixups.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/dts/imx6q-vicut1.dts | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx6q-vicut1.dts b/arch/arm/dts/imx6q-vicut1.dts
index 9f60ed1ac2..9747b3c62e 100644
--- a/arch/arm/dts/imx6q-vicut1.dts
+++ b/arch/arm/dts/imx6q-vicut1.dts
@@ -19,9 +19,23 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	/* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
 };
 
 &iomuxc {
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-08-05 10:16 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-05 10:16 [PATCH v2 00/13] prepare Protonic board code for mainline Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 01/13] ARM: dts: imx6q-prti6q: fix PHY register Oleksij Rempel
2020-08-05 10:16 ` Oleksij Rempel [this message]
2020-08-05 10:16 ` [PATCH v2 03/13] of: base: register DT root as device Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 04/13] ARM: embest-riotboard: port board file to the driver model Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 05/13] net: port nvmem_get_mac_address() from linux kernel Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 06/13] of: of_net: sync of_get_mac_address() with latest kernel version Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 07/13] net: fec_imx: use of_get_mac_address() to get mac address out of DT Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 08/13] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 09/13] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 10/13] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 11/13] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-05 10:16 ` [PATCH v2 12/13] of: add barebox-serial driver Oleksij Rempel
2020-08-11  8:34   ` Sascha Hauer
2020-08-11  8:58     ` Oleksij Rempel
2020-08-11  9:52       ` David Jander
2020-08-05 10:16 ` [PATCH v2 13/13] ARM: dts: imx6q-prti6q: add barebox, serial-number node Oleksij Rempel
2020-08-11 11:12 ` [PATCH v2 00/13] prepare Protonic board code for mainline Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200805101628.4698-3-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox