mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v3 0/6] prepare Protonic board code for mainline
Date: Thu, 13 Aug 2020 14:55:08 +0200	[thread overview]
Message-ID: <20200813125514.13574-1-o.rempel@pengutronix.de> (raw)

changes v3:
- remove barebox-serial driver and use read the rfid directy from board
  code (as was done in initial implementation)
- use initcall instead of registering driver in the board code
- add delayed USB scan
- add rampoops node
- add partition tables 

changes v2:
- add power init support for KvG boards
- spell fixes
- do not print error on probe exit
- add of_console_get_by_alias() helper
- free requested gpio array
- exit fec init only in case of PROBE_DEFERED

This patch series is a preparation and actual Protonic board code.
Following changes was made in the main code:
- register DT root node as device to make it possible to loade board
  code as usual driver
- provide helpers to read ethernet mac from nvmem cell register in a
  devicetree.
- provide barebox-serial driver which should be a nvmem cell consumer
  and
  serial-number DT property provider.
- provide gpio helper to read gpio based board revision.

Oleksij Rempel (6):
  gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  common: console_common: add of_console_get_by_alias() helper
  of: of_device_get_match_compatible() helper
  ARM: protonic-imx6: port Protonic specific board code
  ARM: dts: unify barebox and barebox,env partitions for all Protonic
    boards
  ARM: dts: imx6q-prti6q: add pstore/ramoops node

 arch/arm/boards/protonic-imx6/Makefile |    1 +
 arch/arm/boards/protonic-imx6/board.c  | 1002 ++++++++++++++++++++++++
 arch/arm/dts/imx6dl-plym2m.dts         |   25 +
 arch/arm/dts/imx6dl-prtrvt.dts         |    1 +
 arch/arm/dts/imx6q-prti6q.dts          |   24 +-
 arch/arm/dts/imx6qdl-prti6q-nor.dtsi   |   10 +
 arch/arm/dts/imx6qdl-prti6q.dtsi       |   31 +
 arch/arm/dts/imx6qdl-vicut1.dtsi       |   26 +
 common/console_common.c                |   18 +
 drivers/gpio/gpiolib.c                 |   31 +
 drivers/of/device.c                    |   12 +
 include/console.h                      |    1 +
 include/gpio.h                         |    5 +
 include/of_device.h                    |    6 +
 14 files changed, 1170 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm/boards/protonic-imx6/board.c
 create mode 100644 arch/arm/dts/imx6qdl-prti6q-nor.dtsi

-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2020-08-13 12:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-13 12:55 Oleksij Rempel [this message]
2020-08-13 12:55 ` [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 3/6] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-13 14:07   ` David Jander
2020-08-17  6:54     ` Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200813125514.13574-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox