[PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-

mail archive of the barebox mailing list
 help / color / mirror / Atom feed

* [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-
@ 2020-08-18 10:55 Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment Masahiro Yamada
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Masahiro Yamada @ 2020-08-18 10:55 UTC (permalink / raw)
  To: barebox; +Cc: Masahiro Yamada

This has already been added to subdir-$(CONFIG_X86) a few lines above.
'make mrproper' correctly descends into scripts/setupmbr/.

Remove the redundant addition.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 scripts/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/Makefile b/scripts/Makefile
index 75e68822d..238460fe2 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -52,4 +52,4 @@ subdir-$(CONFIG_DTC)		+= dtc
 subdir-$(CONFIG_ARCH_TEGRA)	+= tegra
 
 # Let clean descend into subdirs
-subdir-	+= basic kconfig setupmbr
+subdir-	+= basic kconfig
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment
  2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
@ 2020-08-18 10:55 ` Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 3/5] sandbox: add sandbox.dtb to always-y Masahiro Yamada
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2020-08-18 10:55 UTC (permalink / raw)
  To: barebox; +Cc: Masahiro Yamada

dtb-y is not defined in these Makefiles. Remove the meaningless code.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 arch/kvx/dts/Makefile   | 1 -
 arch/riscv/dts/Makefile | 1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/kvx/dts/Makefile b/arch/kvx/dts/Makefile
index 391783c1e..d4221d2c1 100644
--- a/arch/kvx/dts/Makefile
+++ b/arch/kvx/dts/Makefile
@@ -9,5 +9,4 @@ endif
 
 obj-$(CONFIG_BOARD_K200) += k200.dtb.o
 
-always := $(dtb-y)
 clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 509f236cc..6bd4e5a92 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -9,5 +9,4 @@ obj-$(CONFIG_BOARD_ERIZO_GENERIC) += erizo-generic.dtb.o
 # created.
 obj- += dummy.o
 
-always := $(dtb-y)
 clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 3/5] sandbox: add sandbox.dtb to always-y
  2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment Masahiro Yamada
@ 2020-08-18 10:55 ` Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux Masahiro Yamada
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2020-08-18 10:55 UTC (permalink / raw)
  To: barebox; +Cc: Masahiro Yamada

Unlike Linux, Barebox does not support 'make dtbs_install'.
There is no good reason to use dtb-y, which is not natively
supported by the Barebox build system.

Sandbox is the special architecture that compiles DTB as a
separate file. Add .dtb to always-y directly.

CONFIG_OFTREE is a bool option. Use a more Kbuild-ish style
instead of ifeq ($(CONFIG_OFTREE),y).

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 arch/sandbox/dts/Makefile | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/sandbox/dts/Makefile b/arch/sandbox/dts/Makefile
index 6f6838857..6f4344da6 100644
--- a/arch/sandbox/dts/Makefile
+++ b/arch/sandbox/dts/Makefile
@@ -1,11 +1,8 @@
-ifeq ($(CONFIG_OFTREE),y)
-dtb-y += \
+always-$(CONFIG_OFTREE) += \
 	sandbox.dtb
-endif
 
 # just to build a built-in.o. Otherwise compilation fails when no devicetree is
 # created.
 obj- += dummy.o
 
-always := $(dtb-y)
 clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux
  2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 3/5] sandbox: add sandbox.dtb to always-y Masahiro Yamada
@ 2020-08-18 10:55 ` Masahiro Yamada
  2020-08-18 10:55 ` [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y Masahiro Yamada
  2020-08-19  6:52 ` [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2020-08-18 10:55 UTC (permalink / raw)
  To: barebox; +Cc: Masahiro Yamada

 - Convert 'always' to 'always-y'

 - Remove redundant 'targets' assignment

 - Use filechk for the offset generation to avoid unneeded
   rebuilds when the content of asm-offsets.h is not changed

 - Remove the explicit build rule of asm-offsets.s because
   it can be built of the pattern rule in scripts/Makefile.build

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 Kbuild | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)

diff --git a/Kbuild b/Kbuild
index 329609604..519be4a3c 100644
--- a/Kbuild
+++ b/Kbuild
@@ -1,14 +1,15 @@
-#####
-# 1) Generate asm-offsets.h
+# SPDX-License-Identifier: GPL-2.0
 #
+# Kbuild for top-level directory of Barebox
+
+#####
+# Generate asm-offsets.h
 
 offsets-file := include/generated/asm-offsets.h
 
-always  += $(offsets-file)
-targets += $(offsets-file)
+always-y += $(offsets-file)
 targets += arch/$(SRCARCH)/lib/asm-offsets.s
 
-
 # Default sed regexp - multiline due to syntax constraints
 define sed-y
 	"/^->/{s:->#\(.*\):/* \1 */:; \
@@ -17,9 +18,9 @@ define sed-y
 	s:->::; p;}"
 endef
 
-quiet_cmd_offsets = GEN     $@
-define cmd_offsets
-	(set -e; \
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
 	 echo "#ifndef __ASM_OFFSETS_H__"; \
 	 echo "#define __ASM_OFFSETS_H__"; \
 	 echo "/*"; \
@@ -31,13 +32,8 @@ define cmd_offsets
 	 echo ""; \
 	 sed -ne $(sed-y) $<; \
 	 echo ""; \
-	 echo "#endif" ) > $@
+	 echo "#endif"
 endef
 
-# We use internal kbuild rules to avoid the "is up to date" message from make
-arch/$(SRCARCH)/lib/asm-offsets.s: arch/$(SRCARCH)/lib/asm-offsets.c FORCE
-	$(Q)mkdir -p $(dir $@)
-	$(call if_changed_dep,cc_s_c)
-
-$(obj)/$(offsets-file): arch/$(SRCARCH)/lib/asm-offsets.s Kbuild
-	$(call cmd,offsets)
+$(offsets-file): arch/$(SRCARCH)/lib/asm-offsets.s FORCE
+	$(call filechk,offsets)
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y
  2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
                   ` (2 preceding siblings ...)
  2020-08-18 10:55 ` [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux Masahiro Yamada
@ 2020-08-18 10:55 ` Masahiro Yamada
  2020-08-19  6:52 ` [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Masahiro Yamada @ 2020-08-18 10:55 UTC (permalink / raw)
  To: barebox; +Cc: Masahiro Yamada

Linux commit faabed295cccc2aba2b67f2e7b309f2892d55004

You can use:

    hostprogs-always-y += foo

as a shorthand for:

    hostprogs += foo
    always-y += foo

Likewise,

    userprogs-always-y += foo

as a shorthand for:

    userprogs += foo
    always-y += foo

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

 scripts/Makefile          | 55 ++++++++++++++++++---------------------
 scripts/Makefile.build    |  2 +-
 scripts/Makefile.clean    |  9 ++++---
 scripts/Makefile.lib      | 11 ++++++++
 scripts/basic/Makefile    |  3 +--
 scripts/dtc/Makefile      |  3 +--
 scripts/imx/Makefile      |  6 ++---
 scripts/mod/Makefile      |  4 +--
 scripts/setupmbr/Makefile |  3 +--
 scripts/tegra/Makefile    |  4 +--
 10 files changed, 51 insertions(+), 49 deletions(-)

diff --git a/scripts/Makefile b/scripts/Makefile
index 238460fe2..30b7ec540 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -1,50 +1,45 @@
 ###
 # scripts contains sources for various helper programs used throughout
 # barebox for the build process.
-# ---------------------------------------------------------------------------
-# kallsyms:      Find all symbols in barebox
 
-hostprogs-y                      += bin2c
-hostprogs-y                      += mkimage
-hostprogs-y                      += fix_size
-hostprogs-y                      += bareboxenv
-hostprogs-y                      += bareboxcrc32
-hostprogs-y                      += kernel-install
-hostprogs-$(CONFIG_CRYPTO_RSA_BUILTIN_KEYS) += rsatoc
+hostprogs-always-y					+= bin2c
+hostprogs-always-y					+= mkimage
+hostprogs-always-y					+= fix_size
+hostprogs-always-y					+= bareboxenv
+hostprogs-always-y					+= bareboxcrc32
+hostprogs-always-y					+= kernel-install
+hostprogs-always-$(CONFIG_CRYPTO_RSA_BUILTIN_KEYS)	+= rsatoc
 HOSTCFLAGS_rsatoc = `pkg-config --cflags openssl`
 HOSTLDLIBS_rsatoc = `pkg-config --libs openssl`
-hostprogs-$(CONFIG_IMD)          += bareboximd
-hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
-hostprogs-$(CONFIG_MIPS)         += mips-relocs
-hostprogs-$(CONFIG_MVEBU_HOSTTOOLS) += kwbimage kwboot mvebuimg
-hostprogs-$(CONFIG_ARCH_OMAP)    += omap_signGP mk-omap-image
-hostprogs-$(CONFIG_ARCH_S5PCxx)  += s5p_cksum
-hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader
+hostprogs-always-$(CONFIG_IMD)				+= bareboximd
+hostprogs-always-$(CONFIG_KALLSYMS)			+= kallsyms
+hostprogs-always-$(CONFIG_MIPS)				+= mips-relocs
+hostprogs-always-$(CONFIG_MVEBU_HOSTTOOLS)		+= kwbimage kwboot mvebuimg
+hostprogs-always-$(CONFIG_ARCH_OMAP)			+= omap_signGP mk-omap-image
+hostprogs-always-$(CONFIG_ARCH_S5PCxx)			+= s5p_cksum
+hostprogs-always-$(CONFIG_ARCH_DAVINCI)			+= mkublheader
 HOSTCFLAGS_zynq_mkimage.o = -I$(srctree) -I$(srctree)/arch/arm/mach-zynq/include
-hostprogs-$(CONFIG_ARCH_ZYNQ)	 += zynq_mkimage
-hostprogs-$(CONFIG_ARCH_SOCFPGA) += socfpga_mkimage
-hostprogs-$(CONFIG_MXS_HOSTTOOLS)+= mxsimage mxsboot
-hostprogs-$(CONFIG_ARCH_LAYERSCAPE) += pblimage
-hostprogs-$(CONFIG_ARCH_STM32MP) += stm32image
+hostprogs-always-$(CONFIG_ARCH_ZYNQ)			+= zynq_mkimage
+hostprogs-always-$(CONFIG_ARCH_SOCFPGA)			+= socfpga_mkimage
+hostprogs-always-$(CONFIG_MXS_HOSTTOOLS)		+= mxsimage mxsboot
+hostprogs-always-$(CONFIG_ARCH_LAYERSCAPE)		+= pblimage
+hostprogs-always-$(CONFIG_ARCH_STM32MP)			+= stm32image
 KBUILD_HOSTCFLAGS += -I$(srctree)/scripts/include/
 HOSTLDLIBS_mxsimage  = `pkg-config --libs openssl`
 HOSTCFLAGS_omap3-usb-loader.o = `pkg-config --cflags libusb-1.0`
 HOSTLDLIBS_omap3-usb-loader  = `pkg-config --libs libusb-1.0`
-hostprogs-$(CONFIG_OMAP3_USB_LOADER)  += omap3-usb-loader
+hostprogs-always-$(CONFIG_OMAP3_USB_LOADER)		+= omap3-usb-loader
 HOSTCFLAGS_omap4_usbboot.o = `pkg-config --cflags libusb-1.0`
 HOSTLDLIBS_omap4_usbboot = -lpthread `pkg-config --libs libusb-1.0`
-hostprogs-$(CONFIG_OMAP4_HOSTTOOL_USBBOOT) += omap4_usbboot
+hostprogs-always-$(CONFIG_OMAP4_HOSTTOOL_USBBOOT)	+= omap4_usbboot
 
-userprogs-$(CONFIG_BAREBOXENV_TARGET)		+= bareboxenv-target
-userprogs-$(CONFIG_KERNEL_INSTALL_TARGET)	+= kernel-install-target
-userprogs-$(CONFIG_BAREBOXCRC32_TARGET)		+= bareboxcrc32-target
-userprogs-$(CONFIG_IMD_TARGET)			+= bareboximd-target
+userprogs-always-$(CONFIG_BAREBOXENV_TARGET)		+= bareboxenv-target
+userprogs-always-$(CONFIG_KERNEL_INSTALL_TARGET)	+= kernel-install-target
+userprogs-always-$(CONFIG_BAREBOXCRC32_TARGET)		+= bareboxcrc32-target
+userprogs-always-$(CONFIG_IMD_TARGET)			+= bareboximd-target
 
 userccflags += -I $(srctree)/$(src)/include
 
-userprogs	:= $(userprogs-y)
-always-y	:= $(hostprogs-y) $(hostprogs-m) $(userprogs-y)
-
 subdir-y			+= mod
 subdir-y			+= imx
 subdir-$(CONFIG_X86)		+= setupmbr
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index a3dfe261a..1614a1ac5 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -45,7 +45,7 @@ include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-di
 include scripts/Makefile.lib
 
 # Do not include host rules unless needed
-ifneq ($(hostprogs)$(hostprogs-y)$(hostprogs-m),)
+ifneq ($(hostprogs),)
 include scripts/Makefile.host
 endif
 
diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
index 97fd2ef48..3c4519fa8 100644
--- a/scripts/Makefile.clean
+++ b/scripts/Makefile.clean
@@ -35,9 +35,12 @@ subdir-ymn	:= $(addprefix $(obj)/,$(subdir-ymn))
 # build a list of files to remove, usually relative to the current
 # directory
 
-__clean-files	:= $(extra-y) $(extra-m) $(extra-)       \
-		   $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files)   \
-		   $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) $(userprogs)
+__clean-files	:= \
+	$(clean-files) $(targets) $(hostprogs) $(userprogs) \
+	$(extra-y) $(extra-m) $(extra-) \
+	$(always-y) $(always-m) $(always-) \
+	$(hostprogs-always-y) $(hostprogs-always-m) $(hostprogs-always-) \
+	$(userprogs-always-y) $(userprogs-always-m) $(userprogs-always-)
 
 # as clean-files is given relative to the current directory, this adds
 # a $(obj) prefix, except for absolute paths
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 3799e777c..3c95384f9 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -89,6 +89,17 @@ real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))
 
 always-y += $(always-m)
 
+# hostprogs-always-y += foo
+# ... is a shorthand for
+# hostprogs += foo
+# always-y  += foo
+hostprogs += $(hostprogs-always-y) $(hostprogs-always-m)
+always-y += $(hostprogs-always-y) $(hostprogs-always-m)
+
+# userprogs-always-y is likewise.
+userprogs += $(userprogs-always-y) $(userprogs-always-m)
+always-y += $(userprogs-always-y) $(userprogs-always-m)
+
 # Add subdir path
 
 extra-y		:= $(addprefix $(obj)/,$(extra-y))
diff --git a/scripts/basic/Makefile b/scripts/basic/Makefile
index 290dd27d2..eeb6a38c5 100644
--- a/scripts/basic/Makefile
+++ b/scripts/basic/Makefile
@@ -2,5 +2,4 @@
 #
 # fixdep: used to generate dependency information during build process
 
-hostprogs	:= fixdep
-always-y	:= $(hostprogs)
+hostprogs-always-y	+= fixdep
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
index 69b0f6a0e..0c857c9cc 100644
--- a/scripts/dtc/Makefile
+++ b/scripts/dtc/Makefile
@@ -1,8 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # scripts/dtc makefile
 
-hostprogs-$(CONFIG_DTC) := dtc fdtget
-always		:= $(hostprogs-y)
+hostprogs-always-$(CONFIG_DTC)		+= dtc
 
 dtc-objs	:= dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
 		   srcpos.o checks.o util.o
diff --git a/scripts/imx/Makefile b/scripts/imx/Makefile
index e7af2c98e..029f9ca9f 100644
--- a/scripts/imx/Makefile
+++ b/scripts/imx/Makefile
@@ -1,7 +1,5 @@
-hostprogs-$(CONFIG_ARCH_IMX_IMXIMAGE) += imx-image
-hostprogs-$(CONFIG_ARCH_IMX_USBLOADER) += imx-usb-loader
-
-always          := $(hostprogs-y)
+hostprogs-always-$(CONFIG_ARCH_IMX_IMXIMAGE)	+= imx-image
+hostprogs-always-$(CONFIG_ARCH_IMX_USBLOADER)	+= imx-usb-loader
 
 HOSTCFLAGS_imx-usb-loader.o = `pkg-config --cflags libusb-1.0`
 HOSTLDLIBS_imx-usb-loader  = `pkg-config --libs libusb-1.0`
diff --git a/scripts/mod/Makefile b/scripts/mod/Makefile
index e02b9f4ce..9926ed08d 100644
--- a/scripts/mod/Makefile
+++ b/scripts/mod/Makefile
@@ -1,5 +1,5 @@
-hostprogs-y	:= modpost mk_elfconfig
-always		:= $(hostprogs-y) empty.o
+hostprogs-always-y	+= modpost mk_elfconfig
+always-y		+= empty.o
 
 modpost-objs	:= modpost.o sumversion.o
 
diff --git a/scripts/setupmbr/Makefile b/scripts/setupmbr/Makefile
index 8680fedce..6e33d1536 100644
--- a/scripts/setupmbr/Makefile
+++ b/scripts/setupmbr/Makefile
@@ -1,4 +1,3 @@
 HOST_EXTRACFLAGS=-I$(srctree)
 
-hostprogs-y  := setupmbr
-always       := $(hostprogs-y)
+hostprogs-always-y += setupmbr
diff --git a/scripts/tegra/Makefile b/scripts/tegra/Makefile
index 8ebc27ca7..dec0b529d 100644
--- a/scripts/tegra/Makefile
+++ b/scripts/tegra/Makefile
@@ -1,6 +1,4 @@
-hostprogs-$(CONFIG_ARCH_TEGRA) += cbootimage
-
-always          := $(hostprogs-y)
+hostprogs-always-$(CONFIG_ARCH_TEGRA) += cbootimage
 
 HOSTLDLIBS_cbootimage  = '-lm'
 
-- 
2.25.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-
  2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
                   ` (3 preceding siblings ...)
  2020-08-18 10:55 ` [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y Masahiro Yamada
@ 2020-08-19  6:52 ` Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-08-19  6:52 UTC (permalink / raw)
  To: Masahiro Yamada; +Cc: barebox

On Tue, Aug 18, 2020 at 07:55:16PM +0900, Masahiro Yamada wrote:
> This has already been added to subdir-$(CONFIG_X86) a few lines above.
> 'make mrproper' correctly descends into scripts/setupmbr/.
> 
> Remove the redundant addition.
> 
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---

Applied, thanks

Sascha

> 
>  scripts/Makefile | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/scripts/Makefile b/scripts/Makefile
> index 75e68822d..238460fe2 100644
> --- a/scripts/Makefile
> +++ b/scripts/Makefile
> @@ -52,4 +52,4 @@ subdir-$(CONFIG_DTC)		+= dtc
>  subdir-$(CONFIG_ARCH_TEGRA)	+= tegra
>  
>  # Let clean descend into subdirs
> -subdir-	+= basic kconfig setupmbr
> +subdir-	+= basic kconfig
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-08-19  6:52 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-18 10:55 [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Masahiro Yamada
2020-08-18 10:55 ` [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment Masahiro Yamada
2020-08-18 10:55 ` [PATCH 3/5] sandbox: add sandbox.dtb to always-y Masahiro Yamada
2020-08-18 10:55 ` [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux Masahiro Yamada
2020-08-18 10:55 ` [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y Masahiro Yamada
2020-08-19  6:52 ` [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir- Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox