From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kKFMr-0008WF-Dl for barebox@lists.infradead.org; Mon, 21 Sep 2020 06:32:06 +0000 Date: Mon, 21 Sep 2020 08:32:03 +0200 From: Sascha Hauer Message-ID: <20200921063203.GF21278@pengutronix.de> References: <1600335415-315975-1-git-send-email-m.otto@phytec.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1600335415-315975-1-git-send-email-m.otto@phytec.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v3 0/2] i.MX6ULL: set engine software for Secure Boot on HABv4 To: Maik Otto Cc: barebox@lists.infradead.org On Thu, Sep 17, 2020 at 11:36:53AM +0200, Maik Otto wrote: > The i.MX6ULL has no CAAM engine for Secure Boot on HABv4. This patch series > set the engine software for i.MX6ULL and for the PHYTEC boards PCL-063 with > i.MX6ULL. > > Changes in v3 and Patch 2: > - rework and move the file habv4-imx6-gencsf.h to habv4-imx6-gencsf-template.h > - rework the file habv4-imx6ull-gencsf.h and add new file > habv4-imx6-gencsf.h > > Changes in v2: > - Rework in Patch 2 the file habv4-imx6-gencsf.h, because cst 3.3.1 fails > for engine software with parameter Feature. > > Maik Otto (2): > arch: arm: boards phytec: Split flash header for pcl063 with i.MX6Ul > and i.MX6ULL > arch: arm: mach-imx: Add habv4 config file for i.MX6ULL Applied, thanks Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox