From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Robin van der Gracht <robin@protonic.nl>
Subject: [PATCH v1] ARM: protonic: vicut1: disable on-die termination to fix PHY bootstrapping
Date: Tue, 18 May 2021 10:37:07 +0200 [thread overview]
Message-ID: <20210518083707.15428-1-o.rempel@pengutronix.de> (raw)
If on-die termination is enabled, the RXC pin of iMX6 will be pulled
high. Since we already have an 10K pull-down on board, the RXC level on
PHY reset will be ~800mV, which is mostly interpreted as 1. On some
reboots we get 0 instead and kernel can't detect the PHY properly.
Since the default 0x020e07ac value is 0, it is sufficient to remove this
entry from the affected imxcfg files.
Since we get stable 0 on pin PHYADDR[2], the PHY address is changed from
4 to 0.
Reported-by: Robin van der Gracht <robin@protonic.nl>
Fixes: 00adc1e33ef8 ("ARM: add imx6 based Protonic boads")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
| 1 -
1 file changed, 1 deletion(-)
--git a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
index 9926fbf4a2..54f655c4c2 100644
--- a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
+++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
@@ -114,7 +114,6 @@ wm 32 0x020e001c 0x007f007f
/* RGMII config */
wm 32 0x020e0768 0x00080000 /* 1V2 DDR IO */
-wm 32 0x020e0788 0x00000200 /* 60 Ohm ODT */
/* Debug */
wm 32 0x020e023c 0x00000005
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2021-05-18 8:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-18 8:37 Oleksij Rempel [this message]
2021-05-25 4:58 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210518083707.15428-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox