mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Trent Piepho <tpiepho@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] net: phy: micrel: Add led-mode support
Date: Wed, 2 Jun 2021 08:41:34 +0200	[thread overview]
Message-ID: <20210602064134.GW5211@pengutronix.de> (raw)
In-Reply-To: <20210531150045.1214037-1-tpiepho@gmail.com>

On Mon, May 31, 2021 at 08:00:45AM -0700, Trent Piepho wrote:
> Add code that will use the micrel,led-mode property to configure the
> led.
> 
> It seems nearly every Micrel PHY equipped board has a custom phy fixup
> to do this.  Maybe some of them won't be needed anymore.
> 
> Signed-off-by: Trent Piepho <tpiepho@gmail.com>
> ---
>  drivers/net/phy/micrel.c | 34 +++++++++++++++++++++++++++++-----
>  1 file changed, 29 insertions(+), 5 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 4e4637024..ea193c84a 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -28,13 +28,16 @@
>  #define KSZPHY_OMSO_MII_OVERRIDE		BIT(0)
>  
>  /* general PHY control reg in vendor specific block. */
> -#define	MII_KSZPHY_CTRL			0x1F
> +#define	MII_KSZPHY_CTRL				0x1F
>  /* bitmap of PHY register to set interrupt mode */
>  #define KSZPHY_CTRL_INT_ACTIVE_HIGH		BIT(9)
>  #define KSZ9021_CTRL_INT_ACTIVE_HIGH		BIT(14)
>  #define KS8737_CTRL_INT_ACTIVE_HIGH		BIT(14)
>  #define KSZ8051_RMII_50MHZ_CLK			BIT(7)
>  
> +/* PHY Control 1 */
> +#define MII_KSZPHY_CTRL_1			0x1e
> +
>  /* Write/read to/from extended registers */
>  #define MII_KSZPHY_EXTREG                       0x0b
>  #define KSZPHY_EXTREG_WRITE                     0x8000
> @@ -63,18 +66,35 @@ static int kszphy_extended_read(struct phy_device *phydev,
>  	return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
>  }
>  
> +/* Handle LED mode, shift = position of first led mode bit, usually 4 or 14 */
> +static int kszphy_led_mode(struct phy_device *phydev, int reg, int shift)
> +{
> +	const struct device_d *dev = &phydev->dev;
> +	const struct device_node *of_node = dev->device_node ? : dev->parent->device_node;
> +	u32 val;
> +
> +	if (!of_property_read_u32(of_node, "micrel,led-mode", &val)) {
> +		if (val > 0x03) {
> +			dev_err(dev, "led-mode 0x%02x out of range\n", val);
> +			return -1;
> +		}
> +		return phy_modify(phydev, reg, 0x03 << shift, val << shift);
> +	}
> +	return 0;
> +}
> +
>  static int kszphy_config_init(struct phy_device *phydev)
>  {
> +	kszphy_led_mode(phydev, MII_KSZPHY_CTRL_1, 14);
> +
>  	return 0;
>  }
>  
>  static int ksz8021_config_init(struct phy_device *phydev)
>  {
> -	u16 val;
> +	phy_set_bits(phydev, MII_KSZPHY_OMSO, KSZPHY_OMSO_B_CAST_OFF);
>  
> -	val = phy_read(phydev, MII_KSZPHY_OMSO);
> -	val |= KSZPHY_OMSO_B_CAST_OFF;
> -	phy_write(phydev, MII_KSZPHY_OMSO, val);
> +	kszphy_led_mode(phydev, MII_KSZPHY_CTRL, 4);
>  
>  	return 0;
>  }
> @@ -89,6 +109,8 @@ static int ks8051_config_init(struct phy_device *phydev)
>  		phy_write(phydev, MII_KSZPHY_CTRL, regval);
>  	}
>  
> +	kszphy_led_mode(phydev, MII_KSZPHY_CTRL, 4);
> +
>  	return 0;
>  }
>  
> @@ -143,6 +165,8 @@ static int ksz9021_config_init(struct phy_device *phydev)
>  		ksz9021_load_values_from_of(phydev, of_node,
>  				    MII_KSZPHY_TX_DATA_PAD_SKEW,
>  				    tx_pad_skew_names);
> +
> +		kszphy_led_mode(phydev, 0x11, 6);
>  	}
>  
>  	return 0;
> -- 
> 2.26.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


      reply	other threads:[~2021-06-02  6:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-31 15:00 Trent Piepho
2021-06-02  6:41 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210602064134.GW5211@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=tpiepho@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox