From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 7/8] RISC-V: add LiteX SoC and linux-on-litex-vexriscv support
Date: Tue, 17 Aug 2021 13:04:34 +0300 [thread overview]
Message-ID: <20210817100435.114756-8-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20210817100435.114756-1-antonynpavlov@gmail.com>
LiteX is a Migen-based System on Chip, supporting softcore
VexRiscv CPU, a 32-bits Linux Capable RISC-V CPU.
See https://github.com/enjoy-digital/litex and
https://github.com/litex-hub/linux-on-litex-vexriscv
for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
arch/riscv/Kconfig.socs | 14 +++
arch/riscv/boards/Makefile | 1 +
arch/riscv/boards/litex-linux/Makefile | 3 +
arch/riscv/boards/litex-linux/lowlevel.c | 22 ++++
arch/riscv/dts/Makefile | 1 +
arch/riscv/dts/litex-linux.dts | 92 +++++++++++++++++
arch/riscv/dts/litex_soc_linux.dtsi | 49 +++++++++
arch/riscv/include/asm/debug_ll.h | 3 +
arch/riscv/include/asm/debug_ll_litex.h | 123 +++++++++++++++++++++++
common/Kconfig | 4 +
images/Makefile.riscv | 4 +
11 files changed, 316 insertions(+)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 221ea133d4..5c281918d5 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -95,4 +95,18 @@ config SIFIVE_L2
bool "SiFive L2 cache controller"
depends on CPU_SIFIVE
+config SOC_LITEX
+ bool "LiteX SoCs"
+ depends on ARCH_RV32I
+ select HAS_ASM_DEBUG_LL
+ select HAS_NMON
+ select USE_COMPRESSED_DTB
+ select RISCV_TIMER
+
+config BOARD_LITEX_LINUX
+ bool "litex linux board"
+ depends on SOC_LITEX
+ select RISCV_M_MODE
+ def_bool y
+
endmenu
diff --git a/arch/riscv/boards/Makefile b/arch/riscv/boards/Makefile
index cb28a25d8b..8d5d9d4fc6 100644
--- a/arch/riscv/boards/Makefile
+++ b/arch/riscv/boards/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_BOARD_ERIZO_GENERIC) += erizo/
obj-$(CONFIG_BOARD_HIFIVE) += hifive/
obj-$(CONFIG_BOARD_BEAGLEV) += beaglev/
+obj-$(CONFIG_BOARD_LITEX_LINUX) += litex-linux/
diff --git a/arch/riscv/boards/litex-linux/Makefile b/arch/riscv/boards/litex-linux/Makefile
new file mode 100644
index 0000000000..3d217ffe0b
--- /dev/null
+++ b/arch/riscv/boards/litex-linux/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+pbl-y += lowlevel.o
diff --git a/arch/riscv/boards/litex-linux/lowlevel.c b/arch/riscv/boards/litex-linux/lowlevel.c
new file mode 100644
index 0000000000..da23ef5633
--- /dev/null
+++ b/arch/riscv/boards/litex-linux/lowlevel.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <common.h>
+#include <asm/barebox-riscv.h>
+#include <debug_ll.h>
+#include <asm/riscv_nmon.h>
+
+ENTRY_FUNCTION(start_litex_linux, a0, a1, a2)
+{
+ extern char __dtb_z_litex_linux_start[];
+ void *fdt;
+
+ barebox_nmon_entry();
+
+ putc_ll('>');
+
+ /* On POR, we are running from read-only memory here. */
+
+ fdt = __dtb_z_litex_linux_start + get_runtime_offset();
+
+ barebox_riscv_machine_entry(0x40000000, SZ_256M, fdt);
+}
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 4a15423b7f..17d7d249e4 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -8,5 +8,6 @@ pbl-$(CONFIG_BOARD_ERIZO_GENERIC) += erizo-generic.dtb.o
pbl-$(CONFIG_BOARD_HIFIVE) += hifive-unmatched-a00.dtb.o \
hifive-unleashed-a00.dtb.o
pbl-$(CONFIG_BOARD_BEAGLEV) += jh7100-beaglev-starlight.dtb.o
+pbl-$(CONFIG_BOARD_LITEX_LINUX) += litex-linux.dtb.o
clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts
diff --git a/arch/riscv/dts/litex-linux.dts b/arch/riscv/dts/litex-linux.dts
new file mode 100644
index 0000000000..d21fa57e30
--- /dev/null
+++ b/arch/riscv/dts/litex-linux.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "litex_soc_linux.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "LiteX VexRiscV-SoC-Linux";
+ compatible = "litex,vexriscv-soc-linux";
+
+ aliases {
+ rom = &rom;
+ sram = &sram;
+ };
+
+ /* ARTY board */
+ rom: rom@00000000 {
+ compatible = "mmio-sram";
+ reg = <0x00000000 0x00008000>;
+ read-only;
+ };
+
+ sram: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x00004000>;
+ };
+
+ main_ram: memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x10000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
+
+/ {
+ ledsgpio: gpio@f000a800 {
+ compatible = "ti,74175";
+ reg = <0xf000a800 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ld0 {
+ label = "arty:green:ld0";
+ gpios = <&ledsgpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ ld1 {
+ label = "arty:green:ld1";
+ gpios = <&ledsgpio 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ ld2 {
+ label = "arty:green:ld2";
+ gpios = <&ledsgpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ ld3 {
+ label = "arty:green:ld3";
+ gpios = <&ledsgpio 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ swgpio: gpio@f0006000 {
+ compatible = "ti,74125";
+ reg = <0xf0006000 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/riscv/dts/litex_soc_linux.dtsi b/arch/riscv/dts/litex_soc_linux.dtsi
new file mode 100644
index 0000000000..94a0ba29da
--- /dev/null
+++ b/arch/riscv/dts/litex_soc_linux.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+/ {
+ compatible = "litex,vexriscv-soc-linux";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ timebase-frequency = <100000000>; // 100 MHz
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "spinalhdl,vexriscv", "riscv";
+ reg = <0>;
+ };
+ };
+
+ uart0: serial@f0001000 {
+ compatible = "litex,uart";
+ reg = <0xf0001000 0x18>;
+ status = "disabled";
+ };
+
+ mac0: mac@f0006800 {
+ compatible = "litex,liteeth";
+ reg = <0xf0006800 0x7c /* base */
+ 0xf0007000 0x0a /* mdio_base */
+ 0xb0000000 0x2000>; /* buf_base */
+ tx-fifo-depth = <2>;
+ rx-fifo-depth = <2>;
+ status = "disabled";
+ };
+
+ spi0: spi@f000b800 {
+ compatible = "litex,spiflash";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0xf000b800 0x100>;
+ status = "disabled";
+ };
+};
diff --git a/arch/riscv/include/asm/debug_ll.h b/arch/riscv/include/asm/debug_ll.h
index b4caa0597a..a3b9c1c4bc 100644
--- a/arch/riscv/include/asm/debug_ll.h
+++ b/arch/riscv/include/asm/debug_ll.h
@@ -43,6 +43,9 @@ static inline void PUTC_LL(char ch)
writel(ch, uart0);
}
+#elif defined CONFIG_DEBUG_LITEX
+
+#include <asm/debug_ll_litex.h>
#endif
diff --git a/arch/riscv/include/asm/debug_ll_litex.h b/arch/riscv/include/asm/debug_ll_litex.h
new file mode 100644
index 0000000000..2fcdd9b0ec
--- /dev/null
+++ b/arch/riscv/include/asm/debug_ll_litex.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * This file is part of barebox.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_DEBUG_LL_LITEX__
+#define __ASM_DEBUG_LL_LITEX__
+
+/** @file
+ * This File contains declaration for early output support
+ */
+
+#include <linux/kconfig.h>
+
+#define DEBUG_LL_UART_ADDR 0xf0001000
+#define UART_RXTX 0x00
+#define UART_TXFULL 0x04
+#define UART_RXEMPTY 0x08
+#define UART_EV_PENDING 0x10
+#define UART_EV_RX (1 << 1)
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#include <asm/io.h>
+
+static inline void PUTC_LL(char ch)
+{
+#ifdef CONFIG_DEBUG_LL
+ /* wait for space */
+ while (__raw_readb((u8 *)DEBUG_LL_UART_ADDR + UART_TXFULL))
+ ;
+
+ __raw_writeb(ch, (u8 *)DEBUG_LL_UART_ADDR + UART_RXTX);
+#endif /* CONFIG_DEBUG_LL */
+}
+#else /* __ASSEMBLY__ */
+/*
+ * Macros for use in assembly language code
+ */
+
+/*
+ * output a character in a0
+ */
+.macro debug_ll_outc_a0
+#ifdef CONFIG_DEBUG_LL
+
+ li t0, DEBUG_LL_UART_ADDR
+
+201:
+ lbu t1, UART_TXFULL(t0) /* uart tx full ? */
+ andi t1, t1, 0xff
+ bnez t1, 201b /* try again */
+
+ sb a0, UART_RXTX(t0) /* write the character */
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * output a character
+ */
+.macro debug_ll_outc chr
+#ifdef CONFIG_DEBUG_LL
+ li a0, \chr
+ debug_ll_outc_a0
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * check character in input buffer
+ * return value:
+ * v0 = 0 no character in input buffer
+ * v0 != 0 character in input buffer
+ */
+.macro debug_ll_tstc
+#ifdef CONFIG_DEBUG_LL
+ li t0, DEBUG_LL_UART_ADDR
+
+ /* get line status and check for data present */
+ lbu s0, UART_RXEMPTY(t0)
+ bnez s0, 243f
+ li s0, 1
+ j 244f
+243: li s0, 0
+244: nop
+#endif /* CONFIG_DEBUG_LL */
+.endm
+
+/*
+ * get character to v0
+ */
+.macro debug_ll_getc
+#ifdef CONFIG_DEBUG_LL
+
+204:
+ debug_ll_tstc
+
+ /* try again */
+ beqz s0, 204b
+
+ /* read a character */
+ lb s0, UART_RXTX(t0)
+ li t1, UART_EV_RX
+ sb t1, UART_EV_PENDING(t0)
+
+#endif /* CONFIG_DEBUG_LL */
+.endm
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_DEBUG_LL_LITEX__ */
diff --git a/common/Kconfig b/common/Kconfig
index a9feae2ae8..cb8bd8b2bf 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1399,6 +1399,10 @@ config DEBUG_SIFIVE
bool "SiFive serial0 port"
depends on SOC_SIFIVE
+config DEBUG_LITEX
+ bool "LiteX serial port"
+ depends on SOC_LITEX
+
endchoice
config DEBUG_LL_NS16550
diff --git a/images/Makefile.riscv b/images/Makefile.riscv
index 4410765cf6..0645238c43 100644
--- a/images/Makefile.riscv
+++ b/images/Makefile.riscv
@@ -19,3 +19,7 @@ image-$(CONFIG_BOARD_HIFIVE) += barebox-hifive-unmatched.img barebox-hifive-unle
pblb-$(CONFIG_BOARD_BEAGLEV) += start_beaglev_starlight
FILE_barebox-beaglev-starlight.img = start_beaglev_starlight.pblb
image-$(CONFIG_BOARD_BEAGLEV) += barebox-beaglev-starlight.img
+
+pblb-$(CONFIG_BOARD_LITEX_LINUX) += start_litex_linux
+FILE_barebox-litex-linux.img = start_litex_linux.pblb
+image-$(CONFIG_BOARD_LITEX_LINUX) += barebox-litex-linux.img
--
2.32.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-08-17 10:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-17 10:04 [PATCH 0/8 v4] RISC-V: add LiteX SoC support Antony Pavlov
2021-08-17 10:04 ` [PATCH 1/8] clocksource: timer-riscv: select CSR from device tree Antony Pavlov
2021-08-17 10:04 ` [PATCH 2/8] serial: add litex UART driver Antony Pavlov
2021-08-17 10:04 ` [PATCH 3/8] console: support set baudrate for fixed baudrate drivers Antony Pavlov
2021-08-17 10:04 ` [PATCH 4/8] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-08-17 10:04 ` [PATCH 5/8] spi: add litex spiflash driver Antony Pavlov
2021-08-17 10:04 ` [PATCH 6/8] net: add LiteEth driver Antony Pavlov
2021-08-17 10:04 ` Antony Pavlov [this message]
2021-08-17 10:04 ` [PATCH 8/8] RISC-V: add litex_linux_defconfig Antony Pavlov
2021-08-17 10:10 ` [PATCH 0/8 v4] RISC-V: add LiteX SoC support Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210817100435.114756-8-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox