* [PATCH v2 1/8] spi: stub device_spi_driver if SPI is disabled
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
@ 2021-12-23 16:03 ` Michael Tretter
2021-12-23 16:03 ` [PATCH v2 2/8] spi: add to_spi_device helper Michael Tretter
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:03 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
This allows drivers that support multiple buses to keep the code for
registering their SPI variant even if SPI is disabled.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2:
- new patch
---
include/spi/spi.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/spi/spi.h b/include/spi/spi.h
index c5efca1cc31c..bca996d8d8f9 100644
--- a/include/spi/spi.h
+++ b/include/spi/spi.h
@@ -515,9 +515,14 @@ static inline int spi_driver_register(struct driver_d *drv)
return register_driver(drv);
}
+#ifdef CONFIG_SPI
#define coredevice_spi_driver(drv) \
register_driver_macro(coredevice,spi,drv)
#define device_spi_driver(drv) \
register_driver_macro(device,spi,drv)
+#else
+#define coredevice_spi_driver(drv)
+#define device_spi_driver(drv)
+#endif
#endif /* __INCLUDE_SPI_H */
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 2/8] spi: add to_spi_device helper
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
2021-12-23 16:03 ` [PATCH v2 1/8] spi: stub device_spi_driver if SPI is disabled Michael Tretter
@ 2021-12-23 16:03 ` Michael Tretter
2021-12-23 16:03 ` [PATCH v2 3/8] i2c: stub device_i2c_driver if I2C is disabled Michael Tretter
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:03 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
Port the helper to get the spi_device from the device_d from Linux.
This macro makes SPI device drivers look a bit nicer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2:
- new patch
---
include/spi/spi.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/spi/spi.h b/include/spi/spi.h
index bca996d8d8f9..c5ad6bd39ff9 100644
--- a/include/spi/spi.h
+++ b/include/spi/spi.h
@@ -108,6 +108,11 @@ struct spi_device {
*/
};
+static inline struct spi_device *to_spi_device(struct device_d *dev)
+{
+ return dev ? container_of(dev, struct spi_device, dev) : NULL;
+}
+
struct spi_message;
/**
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 3/8] i2c: stub device_i2c_driver if I2C is disabled
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
2021-12-23 16:03 ` [PATCH v2 1/8] spi: stub device_spi_driver if SPI is disabled Michael Tretter
2021-12-23 16:03 ` [PATCH v2 2/8] spi: add to_spi_device helper Michael Tretter
@ 2021-12-23 16:03 ` Michael Tretter
2021-12-23 16:04 ` [PATCH v2 4/8] video: ssd1307fb: pass par instead of i2c client to write Michael Tretter
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:03 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
This allows drivers that support multiple buses to keep the code for
registering their I2C variant even if I2C is disabled.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2:
- new patch
---
include/i2c/i2c.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/i2c/i2c.h b/include/i2c/i2c.h
index af6287602ca5..7207b1180e1d 100644
--- a/include/i2c/i2c.h
+++ b/include/i2c/i2c.h
@@ -333,9 +333,14 @@ static inline int i2c_driver_register(struct driver_d *drv)
return register_driver(drv);
}
+#ifdef CONFIG_I2C
#define coredevice_i2c_driver(drv) \
register_driver_macro(coredevice, i2c, drv)
#define device_i2c_driver(drv) \
register_driver_macro(device, i2c, drv)
+#else
+#define coredevice_i2c_driver(drv)
+#define device_i2c_driver(drv)
+#endif
#endif /* I2C_I2C_H */
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 4/8] video: ssd1307fb: pass par instead of i2c client to write
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (2 preceding siblings ...)
2021-12-23 16:03 ` [PATCH v2 3/8] i2c: stub device_i2c_driver if I2C is disabled Michael Tretter
@ 2021-12-23 16:04 ` Michael Tretter
2021-12-23 16:04 ` [PATCH v2 5/8] video: ssd1307fb: don't use i2c client for logging Michael Tretter
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:04 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
By pushing the dependency to i2c down into the write function, the
remaining driver is less dependent on i2c. This allows to delay the
decision to use i2c until the actual bus write.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2: none
---
drivers/video/ssd1307fb.c | 69 ++++++++++++++++++++-------------------
1 file changed, 35 insertions(+), 34 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 5d160ddf338a..61d0e083a3f7 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -93,9 +93,10 @@ static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
return array;
}
-static int ssd1307fb_write_array(struct i2c_client *client,
+static int ssd1307fb_write_array(struct ssd1307fb_par *par,
struct ssd1307fb_array *array, u32 len)
{
+ struct i2c_client *client = par->client;
int ret;
len += sizeof(struct ssd1307fb_array);
@@ -109,7 +110,7 @@ static int ssd1307fb_write_array(struct i2c_client *client,
return 0;
}
-static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
+static inline int ssd1307fb_write_cmd(struct ssd1307fb_par *par, u8 cmd)
{
struct ssd1307fb_array *array;
int ret;
@@ -120,7 +121,7 @@ static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
array->data[0] = cmd;
- ret = ssd1307fb_write_array(client, array, 1);
+ ret = ssd1307fb_write_array(par, array, 1);
kfree(array);
return ret;
@@ -181,20 +182,20 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
}
}
- ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+ ssd1307fb_write_array(par, array, par->width * par->height / 8);
kfree(array);
}
static void ssd1307fb_enable(struct fb_info *info)
{
struct ssd1307fb_par *par = info->priv;
- ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+ ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_ON);
}
static void ssd1307fb_disable(struct fb_info *info)
{
struct ssd1307fb_par *par = info->priv;
- ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_OFF);
+ ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_OFF);
}
static void ssd1307fb_flush(struct fb_info *info)
@@ -215,134 +216,134 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
u32 precharge, dclk, com_invdir, compins;
/* Set initial contrast */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_CONTRAST);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->contrast);
+ ret = ssd1307fb_write_cmd(par, par->contrast);
if (ret < 0)
return ret;
/* Set segment re-map */
if (par->seg_remap) {
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SEG_REMAP_ON);
if (ret < 0)
return ret;
};
/* Set COM direction */
com_invdir = 0xc0 | (par->com_invdir & 0x1) << 3;
- ret = ssd1307fb_write_cmd(par->client, com_invdir);
+ ret = ssd1307fb_write_cmd(par, com_invdir);
if (ret < 0)
return ret;
/* Set multiplex ratio value */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_MULTIPLEX_RATIO);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_MULTIPLEX_RATIO);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->height - 1);
+ ret = ssd1307fb_write_cmd(par, par->height - 1);
if (ret < 0)
return ret;
/* set display offset value */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_DISPLAY_OFFSET);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_DISPLAY_OFFSET);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->com_offset);
+ ret = ssd1307fb_write_cmd(par, par->com_offset);
if (ret < 0)
return ret;
/* Set clock frequency */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_CLOCK_FREQ);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_CLOCK_FREQ);
if (ret < 0)
return ret;
dclk = ((par->dclk_div - 1) & 0xf) | (par->dclk_frq & 0xf) << 4;
- ret = ssd1307fb_write_cmd(par->client, dclk);
+ ret = ssd1307fb_write_cmd(par, dclk);
if (ret < 0)
return ret;
/* Set precharge period in number of ticks from the internal clock */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PRECHARGE_PERIOD);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_PRECHARGE_PERIOD);
if (ret < 0)
return ret;
precharge = (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4;
- ret = ssd1307fb_write_cmd(par->client, precharge);
+ ret = ssd1307fb_write_cmd(par, precharge);
if (ret < 0)
return ret;
/* Set COM pins configuration */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COM_PINS_CONFIG);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_COM_PINS_CONFIG);
if (ret < 0)
return ret;
compins = 0x02 | !(par->com_seq & 0x1) << 4
| (par->com_lrremap & 0x1) << 5;
- ret = ssd1307fb_write_cmd(par->client, compins);
+ ret = ssd1307fb_write_cmd(par, compins);
if (ret < 0)
return ret;
/* Set VCOMH */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_VCOMH);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_VCOMH);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->vcomh);
+ ret = ssd1307fb_write_cmd(par, par->vcomh);
if (ret < 0)
return ret;
/* Turn on the DC-DC Charge Pump */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_CHARGE_PUMP);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
BIT(4) | (par->device_info->need_chargepump ? BIT(2) : 0));
if (ret < 0)
return ret;
/* Switch to horizontal addressing mode */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_ADDRESS_MODE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
SSD1307FB_SET_ADDRESS_MODE_HORIZONTAL);
if (ret < 0)
return ret;
/* Set column range */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_COL_RANGE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par, 0x0);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, par->width - 1);
+ ret = ssd1307fb_write_cmd(par, par->width - 1);
if (ret < 0)
return ret;
/* Set page range */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_SET_PAGE_RANGE);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client, 0x0);
+ ret = ssd1307fb_write_cmd(par, 0x0);
if (ret < 0)
return ret;
- ret = ssd1307fb_write_cmd(par->client,
+ ret = ssd1307fb_write_cmd(par,
par->page_offset + (par->height / 8) - 1);
if (ret < 0)
return ret;
/* Turn on the display */
- ret = ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON);
+ ret = ssd1307fb_write_cmd(par, SSD1307FB_DISPLAY_ON);
if (ret < 0)
return ret;
@@ -564,7 +565,7 @@ static int ssd1307fb_probe(struct device_d *dev)
}
}
- ssd1307fb_write_array(par->client, array, par->width * par->height / 8);
+ ssd1307fb_write_array(par, array, par->width * par->height / 8);
kfree(array);
dev_info(&client->dev,
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 5/8] video: ssd1307fb: don't use i2c client for logging
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (3 preceding siblings ...)
2021-12-23 16:04 ` [PATCH v2 4/8] video: ssd1307fb: pass par instead of i2c client to write Michael Tretter
@ 2021-12-23 16:04 ` Michael Tretter
2021-12-23 16:04 ` [PATCH v2 6/8] video: ssd1307fb: move i2c setup to single place Michael Tretter
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:04 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
We can use the device directly and don't have to use the device that is
attached to the I2C client. This reduces the dependency on i2c.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2: none
---
drivers/video/ssd1307fb.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 61d0e083a3f7..88c88e3253cf 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -401,7 +401,7 @@ static int ssd1307fb_probe(struct device_d *dev)
int i, j;
if (!node) {
- dev_err(&client->dev, "No device tree data found!\n");
+ dev_err(dev, "No device tree data found!\n");
return -EINVAL;
}
@@ -421,22 +421,22 @@ static int ssd1307fb_probe(struct device_d *dev)
goto fb_alloc_error;
}
- par->vbat = regulator_get(&client->dev, "vbat");
+ par->vbat = regulator_get(dev, "vbat");
if (IS_ERR(par->vbat)) {
- dev_info(&client->dev, "Will not use VBAT");
+ dev_info(dev, "Will not use VBAT");
par->vbat = NULL;
}
ret = of_property_read_u32(node, "solomon,width", &par->width);
if (ret) {
- dev_err(&client->dev,
+ dev_err(dev,
"Couldn't find 'solomon,width' in device tree.\n");
goto panel_init_error;
}
ret = of_property_read_u32(node, "solomon,height", &par->height);
if (ret) {
- dev_err(&client->dev,
+ dev_err(dev,
"Couldn't find 'solomon,height' in device tree.\n");
goto panel_init_error;
}
@@ -444,7 +444,7 @@ static int ssd1307fb_probe(struct device_d *dev)
ret = of_property_read_u32(node, "solomon,page-offset",
&par->page_offset);
if (ret) {
- dev_err(&client->dev,
+ dev_err(dev,
"Couldn't find 'solomon,page_offset' in device tree.\n");
goto panel_init_error;
}
@@ -477,7 +477,7 @@ static int ssd1307fb_probe(struct device_d *dev)
vmem = malloc(vmem_size);
if (!vmem) {
- dev_err(&client->dev, "Couldn't allocate graphical memory.\n");
+ dev_err(dev, "Couldn't allocate graphical memory.\n");
ret = -ENOMEM;
goto fb_alloc_error;
}
@@ -508,7 +508,7 @@ static int ssd1307fb_probe(struct device_d *dev)
ret = gpio_request_one(par->reset, flags, "oled-reset");
if (ret) {
- dev_err(&client->dev,
+ dev_err(dev,
"failed to request gpio %d: %d\n",
par->reset, ret);
goto reset_oled_error;
@@ -546,7 +546,7 @@ static int ssd1307fb_probe(struct device_d *dev)
info->dev.parent = dev;
ret = register_framebuffer(info);
if (ret) {
- dev_err(&client->dev, "Couldn't register the framebuffer\n");
+ dev_err(dev, "Couldn't register the framebuffer\n");
goto panel_init_error;
}
@@ -568,7 +568,7 @@ static int ssd1307fb_probe(struct device_d *dev)
ssd1307fb_write_array(par, array, par->width * par->height / 8);
kfree(array);
- dev_info(&client->dev,
+ dev_info(dev,
"ssd1307 framebuffer device registered, using %d bytes of video memory\n",
vmem_size);
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 6/8] video: ssd1307fb: move i2c setup to single place
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (4 preceding siblings ...)
2021-12-23 16:04 ` [PATCH v2 5/8] video: ssd1307fb: don't use i2c client for logging Michael Tretter
@ 2021-12-23 16:04 ` Michael Tretter
2021-12-23 16:04 ` [PATCH v2 7/8] video: ssd1307fb: use function pointer for write Michael Tretter
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:04 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
By having the entire i2c dependent initialzation in a single place, it
is easier to make it optional later.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2: none
---
drivers/video/ssd1307fb.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 88c88e3253cf..1538a1b640a3 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -387,7 +387,6 @@ static const struct of_device_id ssd1307fb_of_match[] = {
static int ssd1307fb_probe(struct device_d *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
struct fb_info *info;
struct device_node *node = dev->device_node;
const struct of_device_id *match =
@@ -410,10 +409,12 @@ static int ssd1307fb_probe(struct device_d *dev)
info->priv = par;
par->info = info;
- par->client = client;
par->device_info = (struct ssd1307fb_deviceinfo *)match->data;
+ par->client = to_i2c_client(dev);
+ i2c_set_clientdata(par->client, par);
+
par->reset = of_get_named_gpio_flags(node,
"reset-gpios", 0, &of_flags);
if (!gpio_is_valid(par->reset) && par->reset == -EPROBE_DEFER) {
@@ -519,8 +520,6 @@ static int ssd1307fb_probe(struct device_d *dev)
if (ret < 0)
goto reset_oled_error;
- i2c_set_clientdata(client, info);
-
if (par->reset > 0) {
/* Reset the screen */
gpio_set_active(par->reset, 1);
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 7/8] video: ssd1307fb: use function pointer for write
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (5 preceding siblings ...)
2021-12-23 16:04 ` [PATCH v2 6/8] video: ssd1307fb: move i2c setup to single place Michael Tretter
@ 2021-12-23 16:04 ` Michael Tretter
2021-12-23 16:04 ` [PATCH v2 8/8] video: ssd1307fb: add spi support Michael Tretter
2022-01-03 8:06 ` [PATCH v2 0/8] video: ssd1307fb: Add SPI support Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:04 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
The function pointer is an abstraction the I2C accesses to be able to
add other bus protocols underneath the driver.
The functionality kind of reminds of regmap, but the driver does only
write data and does not actually use registers. Therefore, using regmap
with the register abstraction is not appropriate.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2: none
---
drivers/video/ssd1307fb.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 1538a1b640a3..d0df073b8ef2 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -53,6 +53,16 @@ struct ssd1307fb_deviceinfo {
int need_chargepump;
};
+struct ssd1307fb_array {
+ u8 type;
+ u8 data[0];
+};
+
+struct ssd1307fb_par;
+
+typedef int (*ssd1307fb_write_array)(struct ssd1307fb_par *par,
+ struct ssd1307fb_array *array, u32 len);
+
struct ssd1307fb_par {
u32 com_invdir;
u32 com_lrremap;
@@ -73,11 +83,8 @@ struct ssd1307fb_par {
u32 seg_remap;
u32 vcomh;
u32 width;
-};
-struct ssd1307fb_array {
- u8 type;
- u8 data[0];
+ ssd1307fb_write_array write_array;
};
static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
@@ -93,8 +100,8 @@ static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
return array;
}
-static int ssd1307fb_write_array(struct ssd1307fb_par *par,
- struct ssd1307fb_array *array, u32 len)
+static int ssd1307fb_i2c_write_array(struct ssd1307fb_par *par,
+ struct ssd1307fb_array *array, u32 len)
{
struct i2c_client *client = par->client;
int ret;
@@ -121,7 +128,7 @@ static inline int ssd1307fb_write_cmd(struct ssd1307fb_par *par, u8 cmd)
array->data[0] = cmd;
- ret = ssd1307fb_write_array(par, array, 1);
+ ret = par->write_array(par, array, 1);
kfree(array);
return ret;
@@ -182,7 +189,7 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
}
}
- ssd1307fb_write_array(par, array, par->width * par->height / 8);
+ par->write_array(par, array, par->width * par->height / 8);
kfree(array);
}
@@ -414,6 +421,7 @@ static int ssd1307fb_probe(struct device_d *dev)
par->client = to_i2c_client(dev);
i2c_set_clientdata(par->client, par);
+ par->write_array = ssd1307fb_i2c_write_array;
par->reset = of_get_named_gpio_flags(node,
"reset-gpios", 0, &of_flags);
@@ -564,7 +572,7 @@ static int ssd1307fb_probe(struct device_d *dev)
}
}
- ssd1307fb_write_array(par, array, par->width * par->height / 8);
+ par->write_array(par, array, par->width * par->height / 8);
kfree(array);
dev_info(dev,
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 8/8] video: ssd1307fb: add spi support
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (6 preceding siblings ...)
2021-12-23 16:04 ` [PATCH v2 7/8] video: ssd1307fb: use function pointer for write Michael Tretter
@ 2021-12-23 16:04 ` Michael Tretter
2022-01-03 8:06 ` [PATCH v2 0/8] video: ssd1307fb: Add SPI support Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Michael Tretter @ 2021-12-23 16:04 UTC (permalink / raw)
To: barebox; +Cc: m.tretter
The Solomon display drivers also support SPI in addition to the I2C.
Add SPI support to the driver that already supports I2C by implementing
the bus write function for SPI and registering an SPI driver.
While the driver needs I2C or SPI, either subsystem is optional as long
as one is enabled.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
Changelog:
v2:
- use new to_spi_device helper
- move warning about undocumented compatible into driver
- remove use of config macros in driver if possible
---
drivers/video/Kconfig | 2 +-
drivers/video/ssd1307fb.c | 62 +++++++++++++++++++++++++++++++++++----
2 files changed, 57 insertions(+), 7 deletions(-)
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a87e8c063899..cfbd541a956e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -15,7 +15,7 @@ config FRAMEBUFFER_CONSOLE
config DRIVER_VIDEO_FB_SSD1307
bool "Solomon SSD1307 framebuffer support"
- depends on I2C && GPIOLIB
+ depends on (I2C || SPI) && GPIOLIB
config VIDEO_VPL
depends on OFTREE
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index d0df073b8ef2..9e141a851f51 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -23,6 +23,7 @@
#include <gpio.h>
#include <of_gpio.h>
#include <regulator.h>
+#include <spi/spi.h>
#define SSD1307FB_DATA 0x40
#define SSD1307FB_COMMAND 0x80
@@ -73,12 +74,14 @@ struct ssd1307fb_par {
u32 dclk_frq;
const struct ssd1307fb_deviceinfo *device_info;
struct i2c_client *client;
+ struct spi_device *spi;
u32 height;
struct fb_info *info;
u32 page_offset;
u32 prechargep1;
u32 prechargep2;
int reset;
+ int dc;
struct regulator *vbat;
u32 seg_remap;
u32 vcomh;
@@ -100,6 +103,27 @@ static struct ssd1307fb_array *ssd1307fb_alloc_array(u32 len, u8 type)
return array;
}
+static int ssd1307fb_spi_write_array(struct ssd1307fb_par *par,
+ struct ssd1307fb_array *array, u32 len)
+{
+ struct spi_device *spi = par->spi;
+ int ret;
+
+ if (array->type == SSD1307FB_COMMAND)
+ gpio_direction_output(par->dc, 0);
+ else
+ gpio_direction_output(par->dc, 1);
+
+ ret = spi_write(spi, array->data, len);
+ if (ret)
+ dev_err(&spi->dev, "Couldn't send SPI command.\n");
+
+ /* Ensure that we remain in data mode. */
+ gpio_direction_output(par->dc, 1);
+
+ return ret;
+}
+
static int ssd1307fb_i2c_write_array(struct ssd1307fb_par *par,
struct ssd1307fb_array *array, u32 len)
{
@@ -385,6 +409,14 @@ static const struct of_device_id ssd1307fb_of_match[] = {
.compatible = "solomon,ssd1306fb-i2c",
.data = (void *)&ssd1307fb_ssd1306_deviceinfo,
},
+ {
+ /*
+ * The compatible of the SPI connected ssd1306 is not
+ * documented as device tree binding.
+ */
+ .compatible = "solomon,ssd1306",
+ .data = (void *)&ssd1307fb_ssd1306_deviceinfo,
+ },
{
.compatible = "solomon,ssd1309fb-i2c",
.data = (void *)&ssd1307fb_ssd1309_deviceinfo,
@@ -419,9 +451,20 @@ static int ssd1307fb_probe(struct device_d *dev)
par->device_info = (struct ssd1307fb_deviceinfo *)match->data;
- par->client = to_i2c_client(dev);
- i2c_set_clientdata(par->client, par);
- par->write_array = ssd1307fb_i2c_write_array;
+ if (IS_ENABLED(CONFIG_I2C) && dev->bus == &i2c_bus) {
+ par->client = to_i2c_client(dev);
+ i2c_set_clientdata(par->client, par);
+ par->write_array = ssd1307fb_i2c_write_array;
+ }
+ if (IS_ENABLED(CONFIG_SPI) && dev->bus == &spi_bus) {
+ par->spi = to_spi_device(dev);
+ par->dc = of_get_named_gpio(node, "dc-gpios", 0);
+ if (!gpio_is_valid(par->dc)) {
+ ret = par->dc;
+ goto fb_alloc_error;
+ }
+ par->write_array = ssd1307fb_spi_write_array;
+ }
par->reset = of_get_named_gpio_flags(node,
"reset-gpios", 0, &of_flags);
@@ -591,9 +634,16 @@ fb_alloc_error:
return ret;
}
-static struct driver_d ssd1307fb_driver = {
- .name = "ssd1307fb",
+static __maybe_unused struct driver_d ssd1307fb_i2c_driver = {
+ .name = "ssd1307fb-i2c",
+ .probe = ssd1307fb_probe,
+ .of_compatible = DRV_OF_COMPAT(ssd1307fb_of_match),
+};
+device_i2c_driver(ssd1307fb_i2c_driver);
+
+static __maybe_unused struct driver_d ssd1307fb_spi_driver = {
+ .name = "ssd1307fb-spi",
.probe = ssd1307fb_probe,
.of_compatible = DRV_OF_COMPAT(ssd1307fb_of_match),
};
-device_i2c_driver(ssd1307fb_driver);
+device_spi_driver(ssd1307fb_spi_driver);
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/8] video: ssd1307fb: Add SPI support
2021-12-23 16:03 [PATCH v2 0/8] video: ssd1307fb: Add SPI support Michael Tretter
` (7 preceding siblings ...)
2021-12-23 16:04 ` [PATCH v2 8/8] video: ssd1307fb: add spi support Michael Tretter
@ 2022-01-03 8:06 ` Sascha Hauer
8 siblings, 0 replies; 10+ messages in thread
From: Sascha Hauer @ 2022-01-03 8:06 UTC (permalink / raw)
To: Michael Tretter; +Cc: barebox
On Thu, Dec 23, 2021 at 05:03:56PM +0100, Michael Tretter wrote:
> Hello,
>
> The Solomon single-chip CMOS OLED/PLED driver with controller can be connected
> to I2C or SPI. The driver already supports I2C. This series adds support for
> SPI connected displays to the driver.
>
> The bindings for the SPI connected display are still not documented. The
> driver uses the (undocumented) solomon,ssd1306 compatible of the staging
> driver in Linux, but uses properties defined for the solomon,ssd1306fb-i2c
> compatible of the I2C driver. I moved the warning about the compatible from
> the commit message into the driver to have it in the same place as the use of
> the compatible and to allow to eventually remove it.
>
> The driver still allows to use SPI and I2C with its own hand-rolled
> abstraction, because the controller does not actually expose registers, but
> simply accepts commands or data. I followed Ahmad's suggestions how to remove
> the ugly #ifdefs and the driver looks a lot nicer now.
>
> Patches 1-3 adjust the SPI and I2C frameworks to make them nicer to use for
> drivers that support devices that may be connected via SPI or I2C.
>
> Patches 4-7 refactor the driver to have fewer locations that refer to I2C to
> simplify disabling the I2C support.
>
> Patch 8 actually adds the SPI support and makes I2C optional.
>
> Michael
>
> ---
>
> Changelog:
>
> v2:
>
> - add new Patches 1-3 for the SPI and I2C frameworks
> - use new SPI and I2C helpers to get rid of use of config macros
> - move warning about undocumented compatible into driver
>
> Michael Tretter (8):
> spi: stub device_spi_driver if SPI is disabled
> spi: add to_spi_device helper
> i2c: stub device_i2c_driver if I2C is disabled
> video: ssd1307fb: pass par instead of i2c client to write
> video: ssd1307fb: don't use i2c client for logging
> video: ssd1307fb: move i2c setup to single place
> video: ssd1307fb: use function pointer for write
> video: ssd1307fb: add spi support
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 10+ messages in thread