From: Ahmad Fatoum <ahmad@a3f.at>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <ahmad@a3f.at>
Subject: [PATCH 2/3] ARM64: rockchip: add config symbol for ARMv8-based rk3399 SoC
Date: Fri, 14 Jan 2022 09:38:24 +0100 [thread overview]
Message-ID: <20220114083825.726347-2-ahmad@a3f.at> (raw)
In-Reply-To: <20220114083825.726347-1-ahmad@a3f.at>
As preperation for adding support for the RK3399-based Radxa Rock Pi
N10, define the ARCH_RK3399 config symbol and associated boilerplate.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
---
arch/arm/mach-rockchip/Kconfig | 18 +++++++++++++++++-
arch/arm/mach-rockchip/atf.c | 4 ++++
arch/arm/mach-rockchip/include/mach/atf.h | 6 ++++++
arch/arm/mach-rockchip/include/mach/debug_ll.h | 6 ++++++
.../mach-rockchip/include/mach/rk3399-regs.h | 16 ++++++++++++++++
common/Kconfig | 10 +++++++++-
firmware/Makefile | 2 ++
7 files changed, 60 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-rockchip/include/mach/rk3399-regs.h
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 596de663f9e3..98ef35769ffd 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -6,7 +6,7 @@ menu "Rockchip Features"
config ARCH_TEXT_BASE
hex
default 0x68000000 if ARCH_RK3188
- default 0x0 if ARCH_RK3288
+ default 0x0
config RK_TIMER
hex
@@ -32,6 +32,15 @@ config ARCH_ROCKCHIP_V8
select CPU_V8
select SYS_SUPPORTS_64BIT_KERNEL
select ARM_ATF
+ select RELOCATABLE
+
+config ARCH_RK3399
+ bool
+ select ARCH_ROCKCHIP_V8
+
+config ARCH_RK3399PRO
+ bool
+ select ARCH_RK3399
config ARCH_RK3568
bool
@@ -66,6 +75,13 @@ config MACH_PINE64_QUARTZ64
comment "select board features:"
+config ARCH_RK3399_OPTEE
+ bool "Build rk3399 OP-TEE binary into barebox"
+ depends on ARCH_RK3399
+ help
+ With this option enabled the RK3399 OP-TEE binary is compiled
+ into barebox and started along with the BL31 trusted firmware.
+
config ARCH_RK3568_OPTEE
bool "Build rk3568 OP-TEE binary into barebox"
depends on ARCH_RK3568
diff --git a/arch/arm/mach-rockchip/atf.c b/arch/arm/mach-rockchip/atf.c
index de22784489b5..0512ff99f456 100644
--- a/arch/arm/mach-rockchip/atf.c
+++ b/arch/arm/mach-rockchip/atf.c
@@ -60,6 +60,10 @@ static unsigned long load_elf64_image_phdr(const void *elf)
SOC##_BAREBOX_LOAD_ADDRESS, (uintptr_t)fdt); \
} while (0) \
+void rk3399_atf_load_bl31(void *fdt)
+{
+ rockchip_atf_load_bl31(RK3399, rk3399_bl31_bin, rk3399_op_tee_bin, fdt);
+}
void rk3568_atf_load_bl31(void *fdt)
{
diff --git a/arch/arm/mach-rockchip/include/mach/atf.h b/arch/arm/mach-rockchip/include/mach/atf.h
index ab328cc8d20a..d1bae5a7714f 100644
--- a/arch/arm/mach-rockchip/include/mach/atf.h
+++ b/arch/arm/mach-rockchip/include/mach/atf.h
@@ -4,17 +4,23 @@
#define __MACH_ATF_H
/* First usable DRAM address. Lower mem is used for ATF and OP-TEE */
+#define RK3399_DRAM_BOTTOM 0xa00000
#define RK3568_DRAM_BOTTOM 0xa00000
/* OP-TEE expects to be loaded here */
+#define RK3399_OPTEE_LOAD_ADDRESS 0x200000
#define RK3568_OPTEE_LOAD_ADDRESS 0x200000
/*
* board lowlevel code should relocate barebox here. This is where
* OP-TEE jumps to after initialization.
*/
+#define RK3399_BAREBOX_LOAD_ADDRESS (RK3399_DRAM_BOTTOM + 1024*1024)
#define RK3568_BAREBOX_LOAD_ADDRESS (RK3568_DRAM_BOTTOM + 1024*1024)
+#ifndef __ASSEMBLY__
+void rk3399_atf_load_bl31(void *fdt);
void rk3568_atf_load_bl31(void *fdt);
+#endif
#endif /* __MACH_ATF_H */
diff --git a/arch/arm/mach-rockchip/include/mach/debug_ll.h b/arch/arm/mach-rockchip/include/mach/debug_ll.h
index 73fc5b5db2ff..42e35188a20a 100644
--- a/arch/arm/mach-rockchip/include/mach/debug_ll.h
+++ b/arch/arm/mach-rockchip/include/mach/debug_ll.h
@@ -8,6 +8,7 @@
#include <mach/rk3188-regs.h>
#include <mach/rk3288-regs.h>
#include <mach/rk3568-regs.h>
+#include <mach/rk3399-regs.h>
#ifdef CONFIG_DEBUG_LL
@@ -29,6 +30,11 @@
#define UART_CLOCK 24000000
#define RK_DEBUG_SOC RK3568
+
+#elif defined CONFIG_DEBUG_ROCKCHIP_RK3399_UART
+
+#define UART_CLOCK 24000000
+#define RK_DEBUG_SOC RK3399
#define serial_out(a, v) writel(v, a)
#define serial_in(a) readl(a)
diff --git a/arch/arm/mach-rockchip/include/mach/rk3399-regs.h b/arch/arm/mach-rockchip/include/mach/rk3399-regs.h
new file mode 100644
index 000000000000..57033b651085
--- /dev/null
+++ b/arch/arm/mach-rockchip/include/mach/rk3399-regs.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __MACH_RK3399_REGS_H
+#define __MACH_RK3399_REGS_H
+
+/* UART */
+#define RK3399_UART0_BASE 0xff180000
+#define RK3399_UART1_BASE 0xff190000
+#define RK3399_UART2_BASE 0xff1a0000
+#define RK3399_UART3_BASE 0xff1b0000
+#define RK3399_UART4_BASE 0xff370000
+
+#define RK3399_IRAM_BASE 0xff8c0000
+#define RK3399_STIMER_BASE 0xff8680a0
+
+#endif
diff --git a/common/Kconfig b/common/Kconfig
index 482faea933a6..1843a81b3d97 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -1358,6 +1358,13 @@ config DEBUG_ROCKCHIP_RK3568_UART
Say Y here if you want kernel low-level debugging support
on RK3568.
+config DEBUG_ROCKCHIP_RK3399_UART
+ bool "RK3399 Debug UART"
+ depends on ARCH_RK3399
+ help
+ Say Y here if you want kernel low-level debugging support
+ on RK3399.
+
config DEBUG_SOCFPGA_UART0
bool "Use SOCFPGA UART0 for low-level debug"
depends on ARCH_SOCFPGA
@@ -1474,7 +1481,8 @@ config DEBUG_OMAP_UART_PORT
config DEBUG_ROCKCHIP_UART_PORT
int "RK3xxx UART debug port" if DEBUG_ROCKCHIP_RK3188_UART || \
DEBUG_ROCKCHIP_RK3288_UART || \
- DEBUG_ROCKCHIP_RK3568_UART
+ DEBUG_ROCKCHIP_RK3568_UART || \
+ DEBUG_ROCKCHIP_RK3399_UART
default 2
depends on ARCH_ROCKCHIP
help
diff --git a/firmware/Makefile b/firmware/Makefile
index 8873f5178d33..87bd033f6e5c 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -18,6 +18,8 @@ firmware-$(CONFIG_FIRMWARE_IMX8MP_ATF) += imx8mp-bl31.bin
firmware-$(CONFIG_FIRMWARE_IMX8MQ_ATF) += imx8mq-bl31.bin
firmware-$(CONFIG_ARCH_RK3568) += rk3568-bl31.bin
firmware-$(CONFIG_ARCH_RK3568_OPTEE) += rk3568-op-tee.bin
+firmware-$(CONFIG_ARCH_RK3399) += rk3399-bl31.bin
+firmware-$(CONFIG_ARCH_RK3399_OPTEE) += rk3399-op-tee.bin
firmware-$(CONFIG_DRIVER_NET_FSL_FMAN) += fsl_fman_ucode_ls1046_r1.0_106_4_18.bin
firmware-$(CONFIG_ARCH_LAYERSCAPE_PPA) += ppa-ls1046a.bin
--
2.33.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-01-14 8:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 8:38 [PATCH 1/3] ARM: rockchip: add new ARCH_ROCKCHIP_{V7,V8} symbols Ahmad Fatoum
2022-01-14 8:38 ` Ahmad Fatoum [this message]
2022-01-14 8:38 ` [PATCH 3/3] clk: rockchip: extend for rk3399 support Ahmad Fatoum
2022-01-14 9:21 ` [PATCH 1/3] ARM: rockchip: add new ARCH_ROCKCHIP_{V7,V8} symbols Sascha Hauer
2022-01-14 9:33 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114083825.726347-2-ahmad@a3f.at \
--to=ahmad@a3f.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox