* [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers
@ 2022-03-21 9:21 Oleksij Rempel
2022-03-21 9:21 ` [PATCH v1 2/2] ARM: boards: protonic-imx6: properly configure RGMII direction for the FEC MAC Oleksij Rempel
2022-03-28 8:48 ` [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Oleksij Rempel @ 2022-03-21 9:21 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Add barebox update handler for the SD ports.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 34 +++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index adde1be8d9..5ca80bd306 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -74,6 +74,7 @@ struct prt_machine_data {
unsigned int i2c_addr;
unsigned int i2c_adapter;
unsigned int emmc_usdhc;
+ unsigned int sd_usdhc;
unsigned int flags;
int (*init)(struct prt_imx6_priv *priv);
};
@@ -442,6 +443,16 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
if (ret)
goto exit_bbu;
+ devicefile = basprintf("mmc%d", dcfg->sd_usdhc);
+ if (!devicefile) {
+ ret = -ENOMEM;
+ goto exit_bbu;
+ }
+
+ ret = imx6_bbu_internal_mmc_register_handler("SD", devicefile, 0);
+ if (ret)
+ goto exit_bbu;
+
return 0;
exit_bbu:
dev_err(priv->dev, "Failed to register bbu: %pe\n", ERR_PTR(ret));
@@ -850,6 +861,7 @@ static const struct prt_machine_data prt_imx6_cfg_alti6p[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_EMMC,
}, {
.hw_id = UINT_MAX
@@ -863,6 +875,7 @@ static const struct prt_machine_data prt_imx6_cfg_victgo[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_victgo,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -877,6 +890,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
.i2c_addr = 0x50,
.i2c_adapter = 1,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = HW_TYPE_VICUT1,
@@ -884,6 +898,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_yaco,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -892,6 +907,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_new,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -906,6 +922,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
.i2c_addr = 0x50,
.i2c_adapter = 1,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = HW_TYPE_VICUT1,
@@ -913,6 +930,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_yaco,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -921,6 +939,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_yaco,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -929,6 +948,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_new,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -943,6 +963,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicutp[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_kvg_new,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
@@ -957,6 +978,7 @@ static const struct prt_machine_data prt_imx6_cfg_lanmcu[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
}, {
.hw_id = UINT_MAX
@@ -970,6 +992,7 @@ static const struct prt_machine_data prt_imx6_cfg_plybas[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR | PRT_IMX6_USB_LONG_DELAY,
}, {
.hw_id = UINT_MAX
@@ -983,6 +1006,7 @@ static const struct prt_machine_data prt_imx6_cfg_plym2m[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR | PRT_IMX6_USB_LONG_DELAY,
}, {
.hw_id = UINT_MAX
@@ -996,6 +1020,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6g[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 1,
+ .sd_usdhc = 0,
.init = prt_imx6_init_prti6g,
.flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
}, {
@@ -1010,6 +1035,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6q[] = {
.i2c_addr = 0x51,
.i2c_adapter = 2,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = HW_TYPE_PRTI6Q,
@@ -1017,6 +1043,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6q[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = UINT_MAX
@@ -1030,6 +1057,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtmvt[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = UINT_MAX
@@ -1043,6 +1071,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtrvt[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_SPI_NOR,
}, {
.hw_id = UINT_MAX
@@ -1056,6 +1085,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtvt7[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.init = prt_imx6_init_prtvt7,
.flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER |
PRT_IMX6_USB_LONG_DELAY,
@@ -1071,6 +1101,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd2[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_EMMC,
}, {
.hw_id = UINT_MAX
@@ -1084,6 +1115,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd3[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
+ .sd_usdhc = 0,
.flags = PRT_IMX6_BOOTSRC_EMMC,
}, {
.hw_id = UINT_MAX
@@ -1097,6 +1129,7 @@ static const struct prt_machine_data prt_imx6_cfg_jozacp[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 0,
+ .sd_usdhc = 2,
.flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
}, {
.hw_id = HW_TYPE_JOZACPP,
@@ -1104,6 +1137,7 @@ static const struct prt_machine_data prt_imx6_cfg_jozacp[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 0,
+ .sd_usdhc = 2,
.flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
}, {
.hw_id = UINT_MAX
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH v1 2/2] ARM: boards: protonic-imx6: properly configure RGMII direction for the FEC MAC
2022-03-21 9:21 [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Oleksij Rempel
@ 2022-03-21 9:21 ` Oleksij Rempel
2022-03-28 8:48 ` [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2022-03-21 9:21 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
To make SJA1105 switch work properly with bareobx, we need to configure
RGMII ref_clk.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 5ca80bd306..1a5c1a7bbd 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -654,6 +654,18 @@ static int prt_imx6_init_prtvt7(struct prt_imx6_priv *priv)
return 0;
}
+static int prt_imx6_init_prtwd3(struct prt_imx6_priv *priv)
+{
+ void __iomem *iomux = (void *)MX6_IOMUXC_BASE_ADDR;
+ uint32_t val;
+
+ val = readl(iomux + IOMUXC_GPR1);
+ val |= IMX6Q_GPR1_ENET_CLK_SEL_ANATOP;
+ writel(val, iomux + IOMUXC_GPR1);
+
+ return 0;
+}
+
static int prt_imx6_rfid_fixup(struct prt_imx6_priv *priv,
struct device_node *root)
{
@@ -1116,6 +1128,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd3[] = {
.i2c_adapter = 0,
.emmc_usdhc = 2,
.sd_usdhc = 0,
+ .init = prt_imx6_init_prtwd3,
.flags = PRT_IMX6_BOOTSRC_EMMC,
}, {
.hw_id = UINT_MAX
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers
2022-03-21 9:21 [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Oleksij Rempel
2022-03-21 9:21 ` [PATCH v1 2/2] ARM: boards: protonic-imx6: properly configure RGMII direction for the FEC MAC Oleksij Rempel
@ 2022-03-28 8:48 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2022-03-28 8:48 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
On Mon, Mar 21, 2022 at 10:21:02AM +0100, Oleksij Rempel wrote:
> Add barebox update handler for the SD ports.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> arch/arm/boards/protonic-imx6/board.c | 34 +++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
> index adde1be8d9..5ca80bd306 100644
> --- a/arch/arm/boards/protonic-imx6/board.c
> +++ b/arch/arm/boards/protonic-imx6/board.c
> @@ -74,6 +74,7 @@ struct prt_machine_data {
> unsigned int i2c_addr;
> unsigned int i2c_adapter;
> unsigned int emmc_usdhc;
> + unsigned int sd_usdhc;
> unsigned int flags;
> int (*init)(struct prt_imx6_priv *priv);
> };
> @@ -442,6 +443,16 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
> if (ret)
> goto exit_bbu;
>
> + devicefile = basprintf("mmc%d", dcfg->sd_usdhc);
> + if (!devicefile) {
> + ret = -ENOMEM;
> + goto exit_bbu;
> + }
> +
> + ret = imx6_bbu_internal_mmc_register_handler("SD", devicefile, 0);
> + if (ret)
> + goto exit_bbu;
> +
> return 0;
> exit_bbu:
> dev_err(priv->dev, "Failed to register bbu: %pe\n", ERR_PTR(ret));
> @@ -850,6 +861,7 @@ static const struct prt_machine_data prt_imx6_cfg_alti6p[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_EMMC,
> }, {
> .hw_id = UINT_MAX
> @@ -863,6 +875,7 @@ static const struct prt_machine_data prt_imx6_cfg_victgo[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_victgo,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -877,6 +890,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
> .i2c_addr = 0x50,
> .i2c_adapter = 1,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = HW_TYPE_VICUT1,
> @@ -884,6 +898,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_yaco,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -892,6 +907,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_new,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -906,6 +922,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
> .i2c_addr = 0x50,
> .i2c_adapter = 1,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = HW_TYPE_VICUT1,
> @@ -913,6 +930,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_yaco,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -921,6 +939,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_yaco,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -929,6 +948,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicut1q[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_new,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -943,6 +963,7 @@ static const struct prt_machine_data prt_imx6_cfg_vicutp[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_kvg_new,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> @@ -957,6 +978,7 @@ static const struct prt_machine_data prt_imx6_cfg_lanmcu[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
> }, {
> .hw_id = UINT_MAX
> @@ -970,6 +992,7 @@ static const struct prt_machine_data prt_imx6_cfg_plybas[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR | PRT_IMX6_USB_LONG_DELAY,
> }, {
> .hw_id = UINT_MAX
> @@ -983,6 +1006,7 @@ static const struct prt_machine_data prt_imx6_cfg_plym2m[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR | PRT_IMX6_USB_LONG_DELAY,
> }, {
> .hw_id = UINT_MAX
> @@ -996,6 +1020,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6g[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 1,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_prti6g,
> .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
> }, {
> @@ -1010,6 +1035,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6q[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 2,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = HW_TYPE_PRTI6Q,
> @@ -1017,6 +1043,7 @@ static const struct prt_machine_data prt_imx6_cfg_prti6q[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = UINT_MAX
> @@ -1030,6 +1057,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtmvt[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = UINT_MAX
> @@ -1043,6 +1071,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtrvt[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_SPI_NOR,
> }, {
> .hw_id = UINT_MAX
> @@ -1056,6 +1085,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtvt7[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .init = prt_imx6_init_prtvt7,
> .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER |
> PRT_IMX6_USB_LONG_DELAY,
> @@ -1071,6 +1101,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd2[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_EMMC,
> }, {
> .hw_id = UINT_MAX
> @@ -1084,6 +1115,7 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd3[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 2,
> + .sd_usdhc = 0,
> .flags = PRT_IMX6_BOOTSRC_EMMC,
> }, {
> .hw_id = UINT_MAX
> @@ -1097,6 +1129,7 @@ static const struct prt_machine_data prt_imx6_cfg_jozacp[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 0,
> + .sd_usdhc = 2,
> .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
> }, {
> .hw_id = HW_TYPE_JOZACPP,
> @@ -1104,6 +1137,7 @@ static const struct prt_machine_data prt_imx6_cfg_jozacp[] = {
> .i2c_addr = 0x51,
> .i2c_adapter = 0,
> .emmc_usdhc = 0,
> + .sd_usdhc = 2,
> .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
> }, {
> .hw_id = UINT_MAX
> --
> 2.30.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-03-28 8:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-21 9:21 [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Oleksij Rempel
2022-03-21 9:21 ` [PATCH v1 2/2] ARM: boards: protonic-imx6: properly configure RGMII direction for the FEC MAC Oleksij Rempel
2022-03-28 8:48 ` [PATCH v1 1/2] ARM: boards: protonic-imx6: add board specific BBU SD handlers Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox