From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v4 11/13] net: dsa: add support for SJA11xx switches
Date: Tue, 12 Apr 2022 10:25:41 +0200 [thread overview]
Message-ID: <20220412082541.GX4012@pengutronix.de> (raw)
In-Reply-To: <20220408082950.824927-12-o.rempel@pengutronix.de>
On Fri, Apr 08, 2022 at 10:29:48AM +0200, Oleksij Rempel wrote:
> Port SJA11xx driver from u-boot v2022.04-rc2 to provide support for NXP SJA11xx
> series of switches.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> drivers/net/Kconfig | 17 +
> drivers/net/Makefile | 1 +
> drivers/net/sja1105.c | 3005 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 3023 insertions(+)
> create mode 100644 drivers/net/sja1105.c
>
...
> +static const struct of_device_id sja1105_ids[] = {
> + { .compatible = "nxp,sja1105e", .data = (void *)SJA1105E },
> + { .compatible = "nxp,sja1105t", .data = (void *)SJA1105T },
> + { .compatible = "nxp,sja1105p", .data = (void *)SJA1105P },
> + { .compatible = "nxp,sja1105q", .data = (void *)SJA1105Q },
> + { .compatible = "nxp,sja1105r", .data = (void *)SJA1105R },
> + { .compatible = "nxp,sja1105s", .data = (void *)SJA1105S },
> + { .compatible = "nxp,sja1110a", .data = (void *)SJA1110A },
> + { .compatible = "nxp,sja1110b", .data = (void *)SJA1110B },
> + { .compatible = "nxp,sja1110c", .data = (void *)SJA1110C },
> + { .compatible = "nxp,sja1110d", .data = (void *)SJA1110D },
Instead of casting the id to a void * you could attach the struct
sja1105_info * directly here.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-04-12 8:27 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-08 8:29 [PATCH v4 00/13] provide DSA support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 01/13] net: add RX preprocessor support Oleksij Rempel
2022-04-12 7:58 ` Sascha Hauer
2022-04-12 8:14 ` Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 02/13] net: add of_find_eth_device_by_node() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 03/13] net: phy: export of_phy_register_fixed_link() function Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 04/13] net: add DSA framework to support basic switch functionality Oleksij Rempel
2022-04-12 8:02 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 05/13] driver: add dev_get_priv() helper Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 06/13] net: port part of if_vlan header from kernel v5.17 Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 07/13] spi: port spi_sync_transfer() function " Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 08/13] net: mdio: add MDIO_DEVAD_NONE define Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 09/13] net: phy: make sure MDIO bus is probed if we search for the PHY Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 10/13] of_net: add rev-rmii support Oleksij Rempel
2022-04-08 8:29 ` [PATCH v4 11/13] net: dsa: add support for SJA11xx switches Oleksij Rempel
2022-04-12 8:25 ` Sascha Hauer [this message]
2022-04-08 8:29 ` [PATCH v4 12/13] net: dsa: add KSZ9477 switch SPI driver Oleksij Rempel
2022-04-12 8:37 ` Sascha Hauer
2022-04-08 8:29 ` [PATCH v4 13/13] add ethlog command Oleksij Rempel
2022-04-12 8:54 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220412082541.GX4012@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox