mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Alexander Shiyan <eagle.alexander923@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] arm: boards: Add support for MYIR MYD-AM335X Development Board
Date: Thu, 21 Apr 2022 09:35:46 +0200	[thread overview]
Message-ID: <20220421073546.GV4012@pengutronix.de> (raw)
In-Reply-To: <20220420095322.89880-1-eagle.alexander923@gmail.com>

On Wed, Apr 20, 2022 at 12:53:22PM +0300, Alexander Shiyan wrote:
> The MYD-AM335X Development Board designed by MYIR is a high-performance
> ARM Evaluation Module (EVM) using the MYC-AM335X CPU module as the core
> controller board. It is based on up to 1GHz Texas Instruments (TI)
> Sitara AM335x family of ARM Cortex-A8 Microprocessors (MPUs) that deliver
> high DMIPs at a low cost while also delivering optional 3D graphics
> acceleration and key peripherals.
> 
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> ---
>  arch/arm/boards/Makefile                      |   1 +
>  arch/arm/boards/myirtech-x335x/Makefile       |   3 +
>  arch/arm/boards/myirtech-x335x/board.c        |  44 +++++++
>  .../defaultenv-myirtech-x335x/boot/nand       |   4 +
>  .../defaultenv-myirtech-x335x/nv/boot.default |   1 +
>  .../nv/linux.bootargs.console                 |   1 +
>  arch/arm/boards/myirtech-x335x/lowlevel.c     | 113 ++++++++++++++++++
>  arch/arm/configs/am335x_mlo_defconfig         |   1 +
>  .../arm/configs/myirtech_am335x_myd_defconfig | 109 +++++++++++++++++
>  arch/arm/dts/Makefile                         |   1 +
>  arch/arm/dts/am335x-myirtech-myd.dts          |  23 ++++
>  arch/arm/mach-omap/Kconfig                    |   6 +
>  .../arm/mach-omap/include/mach/am33xx-clock.h |   1 +
>  .../mach-omap/include/mach/am33xx-silicon.h   |   2 +
>  images/Makefile.am33xx                        |   8 ++
>  15 files changed, 318 insertions(+)
>  create mode 100644 arch/arm/boards/myirtech-x335x/Makefile
>  create mode 100644 arch/arm/boards/myirtech-x335x/board.c
>  create mode 100644 arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/boot/nand
>  create mode 100644 arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/boot.default
>  create mode 100644 arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/linux.bootargs.console
>  create mode 100644 arch/arm/boards/myirtech-x335x/lowlevel.c
>  create mode 100644 arch/arm/configs/myirtech_am335x_myd_defconfig
>  create mode 100644 arch/arm/dts/am335x-myirtech-myd.dts
> 
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 75e15cbda4..d303999614 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -77,6 +77,7 @@ obj-$(CONFIG_MACH_MB7707)			+= module-mb7707/
>  obj-$(CONFIG_MACH_MIOA701)			+= mioa701/
>  obj-$(CONFIG_MACH_MX23EVK)			+= freescale-mx23-evk/
>  obj-$(CONFIG_MACH_MX28EVK)			+= freescale-mx28-evk/
> +obj-$(CONFIG_MACH_MYIRTECH_X335X)		+= myirtech-x335x/
>  obj-$(CONFIG_MACH_NESO)				+= guf-neso/
>  obj-$(CONFIG_MACH_NETGEAR_RN104)		+= netgear-rn104/
>  obj-$(CONFIG_MACH_NETGEAR_RN2120)		+= netgear-rn2120/
> diff --git a/arch/arm/boards/myirtech-x335x/Makefile b/arch/arm/boards/myirtech-x335x/Makefile
> new file mode 100644
> index 0000000000..05d9fc7bc3
> --- /dev/null
> +++ b/arch/arm/boards/myirtech-x335x/Makefile
> @@ -0,0 +1,3 @@
> +lwl-y					+= lowlevel.o
> +obj-y					+= board.o
> +bbenv-$(CONFIG_DEFAULT_ENVIRONMENT)	+= defaultenv-myirtech-x335x
> diff --git a/arch/arm/boards/myirtech-x335x/board.c b/arch/arm/boards/myirtech-x335x/board.c
> new file mode 100644
> index 0000000000..b5af651254
> --- /dev/null
> +++ b/arch/arm/boards/myirtech-x335x/board.c
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/* SPDX-FileCopyrightText: Alexander Shiyan <shc_work@mail.ru> */
> +
> +#include <bootsource.h>
> +#include <common.h>
> +#include <driver.h>
> +#include <envfs.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +#include <mach/am33xx-generic.h>
> +
> +static struct omap_barebox_part myir_barebox_part = {
> +	.nand_offset = SZ_128K,
> +	.nand_size = SZ_512K,
> +};

Isn't this a bit too small? Putting a barebox into 128k seems very
ambicous.

> +
> +static __init int myir_devices_init(void)
> +{
> +	if (!of_machine_is_compatible("myir,myc-am335x"))
> +		return 0;
> +
> +	am33xx_register_ethaddr(0, 0);
> +	am33xx_register_ethaddr(1, 1);
> +
> +	switch (bootsource_get()) {
> +	case BOOTSOURCE_MMC:
> +		omap_set_bootmmc_devname("mmc0");
> +		break;
> +	case BOOTSOURCE_NAND:
> +		omap_set_barebox_part(&myir_barebox_part);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT))
> +		defaultenv_append_directory(defaultenv_myirtech_x335x);
> +
> +	if (IS_ENABLED(CONFIG_SHELL_NONE))
> +		return am33xx_of_register_bootdevice();
> +
> +	return 0;
> +}
> +coredevice_initcall(myir_devices_init);
> diff --git a/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/boot/nand b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/boot/nand
> new file mode 100644
> index 0000000000..aca093eebb
> --- /dev/null
> +++ b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/boot/nand
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +
> +global.bootm.image="/dev/nand0.system.ubi.kernel"
> +global.linux.bootargs.dyn.root="ubi.mtd=system ubi.block=0,root ro"
> diff --git a/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/boot.default b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/boot.default
> new file mode 100644
> index 0000000000..026a25cc7e
> --- /dev/null
> +++ b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/boot.default
> @@ -0,0 +1 @@
> +nand
> diff --git a/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/linux.bootargs.console b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/linux.bootargs.console
> new file mode 100644
> index 0000000000..4310fdd693
> --- /dev/null
> +++ b/arch/arm/boards/myirtech-x335x/defaultenv-myirtech-x335x/nv/linux.bootargs.console
> @@ -0,0 +1 @@
> +console=ttyS0,115200n8 earlyprintk

The console= part shouldn't be needed. barebox should add a console=
parameter matching the current barebox console automatically.

I wouldn't add the earlyprintk by default. It might break booting when
the kernel is not exactly configured for your board. Anyway, that's
personal taste.

> diff --git a/arch/arm/configs/am335x_mlo_defconfig b/arch/arm/configs/am335x_mlo_defconfig
> index 51d238db3e..83bb20e4b5 100644
> --- a/arch/arm/configs/am335x_mlo_defconfig
> +++ b/arch/arm/configs/am335x_mlo_defconfig
> @@ -5,6 +5,7 @@ CONFIG_OMAP_SERIALBOOT=y
>  CONFIG_OMAP_MULTI_BOARDS=y
>  CONFIG_MACH_AFI_GF=y
>  CONFIG_MACH_BEAGLEBONE=y
> +CONFIG_MACH_MYIRTECH_X335X=y
>  CONFIG_MACH_PHYTEC_SOM_AM335X=y
>  CONFIG_THUMB2_BAREBOX=y
>  # CONFIG_MEMINFO is not set
> diff --git a/arch/arm/configs/myirtech_am335x_myd_defconfig b/arch/arm/configs/myirtech_am335x_myd_defconfig

Do you need this config? I rather prefer to add the board to some
existing config, omap_defconfig in this case.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2022-04-21  7:38 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-20  9:53 Alexander Shiyan
2022-04-21  7:35 ` Sascha Hauer [this message]
2022-04-21  7:57   ` Alexander Shiyan
2022-04-21  8:30     ` Sascha Hauer
2022-04-21  8:58       ` Alexander Shiyan
2022-04-22  6:50         ` Sascha Hauer
2022-04-22  7:25           ` Alexander Shiyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220421073546.GV4012@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=eagle.alexander923@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox