From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Tue, 09 Aug 2022 13:59:20 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1oLNtF-00HL3Y-Qv for lore@lore.pengutronix.de; Tue, 09 Aug 2022 13:59:20 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1oLNtF-0008Ao-R5 for lore@pengutronix.de; Tue, 09 Aug 2022 13:59:19 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:From:In-Reply-To: Content-Type:MIME-Version:References:Message-ID:Subject:Cc:To:Date:Reply-To: Content-Transfer-Encoding:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=TxKopVisrT5FBXWcgBkCDFwd0H/D9M40J6/1aprDfRk=; b=blCXchRYVR6FIIwfE0zSjcDgeW 8Iws+7CX6bRz4szikgCwQnD0G4FQdcESEg9wt5SjpNp8qVe9aN6JoBodzguD96CRK1YCcJvTSmQoc Eo+pYSTcdj6vK+1tdS/+3LgvGdnE5AL1MwStRird1fPWLBr0losODJMsRd0iiTF0K83Hfdzfi6FL+ 1JJ7MHGkPh6DwNFXZmGLa7V4gHKWUDenX8jQlJMhFXOXGu3hoHfHyWto6h6g/476tfwJke+QIDQxw fXtUrlJu9WOUsYOpmisqM/ScslOE/IlFmAFZRakIT3ehYPO6UBbqxdMIm5V/nQkkqc6miYBTVDNu0 8ytNiUEA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1oLNrl-003ju9-7u; Tue, 09 Aug 2022 11:57:45 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1oLNrc-003jqy-2j for barebox@lists.infradead.org; Tue, 09 Aug 2022 11:57:40 +0000 Received: from ptx.hi.pengutronix.de ([2001:67c:670:100:1d::c0]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1oLNra-00084r-34; Tue, 09 Aug 2022 13:57:34 +0200 Received: from sha by ptx.hi.pengutronix.de with local (Exim 4.92) (envelope-from ) id 1oLNrZ-00034a-DN; Tue, 09 Aug 2022 13:57:33 +0200 Date: Tue, 9 Aug 2022 13:57:33 +0200 To: Frank Wunderlich Cc: barebox@lists.infradead.org, Frank Wunderlich Message-ID: <20220809115733.GU31528@pengutronix.de> References: <20220724122119.62031-1-linux@fw-web.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20220724122119.62031-1-linux@fw-web.de> X-Sent-From: Pengutronix Hildesheim X-URL: http://www.pengutronix.de/ X-Accept-Language: de,en X-Accept-Content-Type: text/plain User-Agent: Mutt/1.10.1 (2018-07-13) From: Sascha Hauer X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220809_045736_486035_5C36C5F9 X-CRM114-Status: GOOD ( 21.30 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.ext.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.1 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_LOW,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: Re: [PATCH] arm: rockchip: switch to mainline dts for bpi-r2-pro X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.ext.pengutronix.de) Hi Frank, On Sun, Jul 24, 2022 at 02:21:19PM +0200, Frank Wunderlich wrote: > From: Frank Wunderlich > > Use mainline DTS for Bananapi R2 Pro like the other rk356x devices. > > Xhci0 has to be set to host again, as board has no id-pin to switch between > otg and hostmode. > > Signed-off-by: Frank Wunderlich > --- > .../boards/rockchip-rk3568-bpi-r2pro/board.c | 5 +- > arch/arm/dts/rk3568-bpi-r2-pro.dts | 562 +----------------- > 2 files changed, 4 insertions(+), 563 deletions(-) This patch doesn't apply on master or next, could you rebase it? Sascha > > diff --git a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c > index ce633266f52c..9853bf275f9f 100644 > --- a/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c > +++ b/arch/arm/boards/rockchip-rk3568-bpi-r2pro/board.c > @@ -36,8 +36,9 @@ static int rk3568_bpi_r2pro_probe(struct device_d *dev) > > defaultenv_append_directory(defaultenv); > > - rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT, "/dev/emmc"); > - rk3568_bbu_mmc_register("sd", 0, "/dev/sd"); > + rk3568_bbu_mmc_register("sd", 0, "/dev/mmc0"); > + rk3568_bbu_mmc_register("emmc", BBU_HANDLER_FLAG_DEFAULT, > + "/dev/mmc1"); > > return 0; > } > diff --git a/arch/arm/dts/rk3568-bpi-r2-pro.dts b/arch/arm/dts/rk3568-bpi-r2-pro.dts > index c5cc300359c2..58a2bc442fdf 100644 > --- a/arch/arm/dts/rk3568-bpi-r2-pro.dts > +++ b/arch/arm/dts/rk3568-bpi-r2-pro.dts > @@ -5,23 +5,9 @@ > */ > > /dts-v1/; > -#include > -#include > -#include > -#include "rk3568.dtsi" > - > +#include "arm64/rockchip/rk3568-bpi-r2-pro.dts" > / { > - model = "Bananapi-R2 Pro (RK3568) DDR4 Board"; > - compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568"; > - > - aliases { > - emmc = &sdhci; > - sd = &sdmmc0; > - }; > - > chosen { > - stdout-path = "serial2:1500000n8"; > - > environment-sd { > compatible = "barebox,environment"; > device-path = &environment_sd; > @@ -39,462 +25,10 @@ > device_type = "memory"; > reg = <0x0 0x00a00000 0x0 0x7f600000>; > }; > - > - leds { > - compatible = "gpio-leds"; > - pinctrl-names = "default"; > - pinctrl-0 = <&blue_led_pin &green_led_pin>; > - > - blue_led: led-0 { > - color = ; > - default-state = "off"; > - function = LED_FUNCTION_STATUS; > - gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; > - }; > - > - green_led: led-1 { > - color = ; > - default-state = "on"; > - function = LED_FUNCTION_POWER; > - gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; > - }; > - }; > - > - dc_12v: dc-12v { > - compatible = "regulator-fixed"; > - regulator-name = "dc_12v"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <12000000>; > - regulator-max-microvolt = <12000000>; > - }; > - > - vcc3v3_sys: vcc3v3-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_sys: vcc5v0-sys { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_sys"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc3v3_lcd0_n: vcc3v3-lcd0-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd0_n"; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_lcd1_n: vcc3v3-lcd1-n { > - compatible = "regulator-fixed"; > - regulator-name = "vcc3v3_lcd1_n"; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc5v0_usb: vcc5v0_usb { > - compatible = "regulator-fixed"; > - regulator-name = "vcc5v0_usb"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&dc_12v>; > - }; > - > - vcc5v0_usb_host: vcc5v0-usb-host { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_host_en>; > - regulator-name = "vcc5v0_usb_host"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > - > - vcc5v0_usb_otg: vcc5v0-usb-otg { > - compatible = "regulator-fixed"; > - enable-active-high; > - gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; > - pinctrl-names = "default"; > - pinctrl-0 = <&vcc5v0_usb_otg_en>; > - regulator-name = "vcc5v0_usb_otg"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - vin-supply = <&vcc5v0_usb>; > - }; > -}; > - > -&gmac1 { > - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > - clock_in_out = "output"; > - phy-handle = <&rgmii_phy1>; > - phy-mode = "rgmii"; > - pinctrl-names = "default"; > - pinctrl-0 = <&gmac1m1_miim > - &gmac1m1_tx_bus2 > - &gmac1m1_rx_bus2 > - &gmac1m1_rgmii_clk > - &gmac1m1_rgmii_bus>; > - > - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; > - snps,reset-active-low; > - /* Reset time is 20ms, 100ms for rtl8211f */ > - snps,reset-delays-us = <0 20000 100000>; > - tx_delay = <0x3c>; > - rx_delay = <0x2f>; > - status = "okay"; > -}; > - > -&i2c0 { > - status = "okay"; > - > - rk809: pmic@20 { > - compatible = "rockchip,rk809"; > - reg = <0x20>; > - interrupt-parent = <&gpio0>; > - interrupts = ; > - #clock-cells = <1>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pmic_int>; > - > - clock-output-names = "rk808-clkout1", "rk808-clkout2"; > - /* 1: rst regs (default in codes), 0: rst the pmic */ > - pmic-reset-func = <0>; > - > - rockchip,system-power-controller; > - vcc1-supply = <&vcc3v3_sys>; > - vcc2-supply = <&vcc3v3_sys>; > - vcc3-supply = <&vcc3v3_sys>; > - vcc4-supply = <&vcc3v3_sys>; > - vcc5-supply = <&vcc3v3_sys>; > - vcc6-supply = <&vcc3v3_sys>; > - vcc7-supply = <&vcc3v3_sys>; > - vcc8-supply = <&vcc3v3_sys>; > - vcc9-supply = <&vcc3v3_sys>; > - wakeup-source; > - > - regulators { > - vdd_logic: DCDC_REG1 { > - regulator-name = "vdd_logic"; > - regulator-always-on; > - regulator-boot-on; > - regulator-init-microvolt = <900000>; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdd_gpu: DCDC_REG2 { > - regulator-name = "vdd_gpu"; > - regulator-init-microvolt = <900000>; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_ddr: DCDC_REG3 { > - regulator-name = "vcc_ddr"; > - regulator-always-on; > - regulator-boot-on; > - regulator-initial-mode = <0x2>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - }; > - }; > - > - vdd_npu: DCDC_REG4 { > - regulator-name = "vdd_npu"; > - regulator-init-microvolt = <900000>; > - regulator-initial-mode = <0x2>; > - regulator-min-microvolt = <500000>; > - regulator-max-microvolt = <1350000>; > - regulator-ramp-delay = <6001>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_1v8: DCDC_REG5 { > - regulator-name = "vcc_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_image: LDO_REG1 { > - regulator-name = "vdda0v9_image"; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda_0v9: LDO_REG2 { > - regulator-name = "vdda_0v9"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vdda0v9_pmu: LDO_REG3 { > - regulator-name = "vdda0v9_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <900000>; > - regulator-max-microvolt = <900000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <900000>; > - }; > - }; > - > - vccio_acodec: LDO_REG4 { > - regulator-name = "vccio_acodec"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vccio_sd: LDO_REG5 { > - regulator-name = "vccio_sd"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_pmu: LDO_REG6 { > - regulator-name = "vcc3v3_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <3300000>; > - }; > - }; > - > - vcca_1v8: LDO_REG7 { > - regulator-name = "vcca_1v8"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcca1v8_pmu: LDO_REG8 { > - regulator-name = "vcca1v8_pmu"; > - regulator-always-on; > - regulator-boot-on; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-on-in-suspend; > - regulator-suspend-microvolt = <1800000>; > - }; > - }; > - > - vcca1v8_image: LDO_REG9 { > - regulator-name = "vcca1v8_image"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <1800000>; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc_3v3: SWITCH_REG1 { > - regulator-name = "vcc_3v3"; > - regulator-always-on; > - regulator-boot-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - > - vcc3v3_sd: SWITCH_REG2 { > - regulator-name = "vcc3v3_sd"; > - regulator-always-on; > - > - regulator-state-mem { > - regulator-off-in-suspend; > - }; > - }; > - }; > - }; > -}; > - > -&i2c5 { > - /* pin 3 (SDA) + 4 (SCL) of header con2 */ > - status = "disabled"; > -}; > - > -&pmu_io_domains { > - pmuio1-supply = <&vcc3v3_pmu>; > - pmuio2-supply = <&vcc3v3_pmu>; > - vccio1-supply = <&vccio_acodec>; > - vccio3-supply = <&vccio_sd>; > - vccio4-supply = <&vcc_3v3>; > - vccio5-supply = <&vcc_3v3>; > - vccio6-supply = <&vcc_1v8>; > - vccio7-supply = <&vcc_3v3>; > - status = "okay"; > -}; > - > -&mdio1 { > - rgmii_phy1: ethernet-phy@0 { > - compatible = "ethernet-phy-ieee802.3-c22"; > - reg = <0x0>; > - }; > -}; > - > -&pinctrl { > - leds { > - blue_led_pin: blue-led-pin { > - rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - green_led_pin: green-led-pin { > - rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > - > - pmic { > - pmic_int: pmic_int { > - rockchip,pins = > - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > - }; > - > - }; > - > - usb { > - vcc5v0_usb_host_en: vcc5v0_usb_host_en { > - rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - > - vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { > - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; > - }; > - }; > -}; > - > -&pwm8 { > - /* fan 5v - gnd - pwm */ > - status = "okay"; > -}; > - > -&pwm10 { > - /* pin 7 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm11 { > - /* pin 15 of header con2 */ > - status = "disabled"; > -}; > - > -&pwm12 { > - /* pin 21 of header con2 */ > - /* shared with uart9 + spi3 */ > - pinctrl-0 = <&pwm12m1_pins>; > - status = "disabled"; > -}; > - > -&pwm13 { > - /* pin 24 of header con2 */ > - /* shared with uart9 */ > - pinctrl-0 = <&pwm13m1_pins>; > - status = "disabled"; > -}; > - > -&pwm14 { > - /* pin 23 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm14m1_pins>; > - status = "disabled"; > -}; > - > -&pwm15 { > - /* pin 19 of header con2 */ > - /* shared with spi3 */ > - pinctrl-0 = <&pwm15m1_pins>; > - status = "disabled"; > -}; > - > -&saradc { > - vref-supply = <&vcca_1v8>; > - status = "okay"; > }; > > &sdhci { > - bus-width = <8>; > - max-frequency = <200000000>; > - non-removable; > no-sd; > - pinctrl-names = "default"; > - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > - status = "okay"; > > partitions { > compatible = "fixed-partitions"; > @@ -509,18 +43,6 @@ > }; > > &sdmmc0 { > - bus-width = <4>; > - cap-sd-highspeed; > - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; > - disable-wp; > - max-frequency = <150000000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > - sd-uhs-sdr104; > - vmmc-supply = <&vcc3v3_sd>; > - vqmmc-supply = <&vccio_sd>; > - status = "okay"; > - > partitions { > compatible = "fixed-partitions"; > #address-cells = <2>; > @@ -533,88 +55,6 @@ > }; > }; > > -&uart0 { > - /* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */ > - status = "disabled"; > -}; > - > -&uart2 { > - /* debug-uart */ > - status = "okay"; > -}; > - > -&uart7 { > - /* pin 11 (TX) + 13 (RX) of header con2 */ > - pinctrl-0 = <&uart7m1_xfer>; > - status = "disabled"; > -}; > - > -&uart9 { > - /* pin 21 (TX) + 24 (RX) of header con2 */ > - /* shared with pwm13 and pwm12/spi3 */ > - pinctrl-0 = <&uart9m1_xfer>; > - status = "disabled"; > -}; > - > -&u2phy0_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&u2phy0_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -}; > - > -/*&u2phy1_host { > - phy-supply = <&vcc5v0_usb_host>; > - status = "okay"; > -}; > - > -&u2phy1_otg { > - phy-supply = <&vcc5v0_usb_otg>; > - status = "okay"; > -};*/ > - > -&usb2phy0 { > - status = "okay"; > -}; > - > -/*&usb2phy1 { > - status = "okay"; > -};*/ > - > -&usb_host0_ehci { > - status = "okay"; > -}; > - > -&usb_host0_ohci { > - status = "okay"; > -}; > - > -&usb_host1_ehci { > - status = "okay"; > -}; > - > -&usb_host1_ohci { > - status = "okay"; > -}; > - > &usb_host0_xhci { > dr_mode = "host"; > - extcon = <&usb2phy0>; > - status = "okay"; > -}; > - > -&usb_host1_xhci { > - dr_mode = "host"; > - status = "okay"; > -}; > - > -&combphy0_us { > - status = "okay"; > -}; > - > -&combphy1_usq { > - status = "okay"; > }; > -- > 2.34.1 > > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |