From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v1 6/8] ARM: boards: Skov-i.MX6: select KSZ8873 switch driver
Date: Mon, 26 Sep 2022 10:17:38 +0200 [thread overview]
Message-ID: <20220926081740.76968-6-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20220926081740.76968-1-o.rempel@pengutronix.de>
The board code depends now on the switch driver probe functionality. If
this driver is not enabled, we will make wrong decision.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index dcb70c8c1a..c78c950357 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -646,6 +646,8 @@ config MACH_SKOV_IMX6
select ARCH_IMX6
select ARM_USE_COMPRESSED_DTB
select MCI_IMX_ESDHC_PBL
+ select DSA
+ select DRIVER_NET_KSZ8873
endif
--
2.30.2
next prev parent reply other threads:[~2022-09-26 8:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 8:17 [PATCH v1 1/8] mdio_bus: do reset only on PHY devices Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 2/8] driver: add dev_is_probed() helper function Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 3/8] net: ksz8873: add device validation to be able to detect missing switch Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 4/8] ARM: boards: skov-imx6: free used gpio devices pins Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 5/8] ARM: boards: skov-imx6: rework switch detection Oleksij Rempel
2022-09-26 8:17 ` Oleksij Rempel [this message]
2022-09-26 8:17 ` [PATCH v1 7/8] ARM: dts: Skov i.MX6: start using mainlined kernel dts Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 8/8] net: dsa: do not wait for aneg is actually done on the port start Oleksij Rempel
2022-10-04 7:44 ` [PATCH v1 1/8] mdio_bus: do reset only on PHY devices Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220926081740.76968-6-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox