From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v1 8/8] net: dsa: do not wait for aneg is actually done on the port start
Date: Mon, 26 Sep 2022 10:17:40 +0200 [thread overview]
Message-ID: <20220926081740.76968-8-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20220926081740.76968-1-o.rempel@pengutronix.de>
Aneg configuration should be done by the eth code, not dsa.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/net/dsa.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/dsa.c b/drivers/net/dsa.c
index 7a64a79412..040ba897e2 100644
--- a/drivers/net/dsa.c
+++ b/drivers/net/dsa.c
@@ -111,10 +111,6 @@ static int dsa_port_start(struct eth_device *edev)
dsa_port_set_ethaddr(edev);
- ret = phy_wait_aneg_done(dp->edev.phydev);
- if (ret)
- return ret;
-
if (ops->port_enable) {
ret = ops->port_enable(dp, dp->index, dp->edev.phydev);
if (ret)
--
2.30.2
next prev parent reply other threads:[~2022-09-26 8:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-26 8:17 [PATCH v1 1/8] mdio_bus: do reset only on PHY devices Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 2/8] driver: add dev_is_probed() helper function Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 3/8] net: ksz8873: add device validation to be able to detect missing switch Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 4/8] ARM: boards: skov-imx6: free used gpio devices pins Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 5/8] ARM: boards: skov-imx6: rework switch detection Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 6/8] ARM: boards: Skov-i.MX6: select KSZ8873 switch driver Oleksij Rempel
2022-09-26 8:17 ` [PATCH v1 7/8] ARM: dts: Skov i.MX6: start using mainlined kernel dts Oleksij Rempel
2022-09-26 8:17 ` Oleksij Rempel [this message]
2022-10-04 7:44 ` [PATCH v1 1/8] mdio_bus: do reset only on PHY devices Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220926081740.76968-8-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox