mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 1/6] net: add promiscuous mode configuration support
Date: Fri, 4 Nov 2022 09:25:45 +0100	[thread overview]
Message-ID: <20221104082545.GQ3143@pengutronix.de> (raw)
In-Reply-To: <20221103131351.2059683-1-o.rempel@pengutronix.de>

On Thu, Nov 03, 2022 at 02:13:46PM +0100, Oleksij Rempel wrote:
> This configuration is mostly needed for controllers attached to switches
> with different MAC address configurations.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  include/net.h |  3 +++
>  net/eth.c     | 10 ++++++++++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/include/net.h b/include/net.h
> index 338033d698..96c2ed1d11 100644
> --- a/include/net.h
> +++ b/include/net.h
> @@ -49,6 +49,8 @@ struct eth_device {
>  				 int *length);
>  	void (*rx_monitor) (struct eth_device*, void *packet, int length);
>  	void (*tx_monitor) (struct eth_device*, void *packet, int length);
> +	/* Set promiscuous mode */
> +	int  (*set_promiscuous_mode) (struct eth_device*, bool enable);
>  
>  	struct eth_device *next;
>  	void *priv;
> @@ -113,6 +115,7 @@ int eth_send(struct eth_device *edev, void *packet, int length);	   /* Send a pa
>  int eth_rx(void);			/* Check for received packets	*/
>  void eth_open_all(void);
>  struct eth_device *of_find_eth_device_by_node(struct device_node *np);
> +int eth_set_promiscuous_mode(struct eth_device *edev, bool enable);
>  
>  /* associate a MAC address to a ethernet device. Should be called by
>   * board code for boards which store their MAC address at some unusual
> diff --git a/net/eth.c b/net/eth.c
> index 8f6ff7db3a..ad4b9d5987 100644
> --- a/net/eth.c
> +++ b/net/eth.c
> @@ -31,6 +31,16 @@ struct eth_ethaddr {
>  
>  static LIST_HEAD(ethaddr_list);
>  
> +int eth_set_promiscuous_mode(struct eth_device *edev, bool enable)
> +{
> +	int ret = 0;
> +
> +	if (edev->set_promiscuous_mode)
> +		ret = edev->set_promiscuous_mode(edev, enable);
> +
> +	return ret;
> +}

We should return an error when set_promiscuous_mode() is not
implemented.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



  parent reply	other threads:[~2022-11-04  8:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-03 13:13 Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 2/6] net: dsa: enable promiscuous mode for switch master edev Oleksij Rempel
2022-11-04  8:26   ` Sascha Hauer
2022-11-04  8:34     ` Ahmad Fatoum
2022-11-03 13:13 ` [PATCH v2 3/6] drivers: net: fec_imx: add promiscuous mode configuration support Oleksij Rempel
2022-11-04  8:29   ` Sascha Hauer
2022-11-04  8:52     ` Sascha Hauer
2022-11-03 13:13 ` [PATCH v2 4/6] net: dsa: fix of_device_ensure_probed*() for switch ports Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 5/6] ARM: boards: skov-imx6: convert all pr_ to dev_ prints Oleksij Rempel
2022-11-03 13:13 ` [PATCH v2 6/6] ARM: boards: skov-imx6: assigned separate MAC address to LAN2 Oleksij Rempel
2022-11-04  8:25 ` Sascha Hauer [this message]
2022-11-04  8:37 ` [PATCH v2 1/6] net: add promiscuous mode configuration support Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221104082545.GQ3143@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=o.rempel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox