From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: "Leif Middelschulte" <leif.middelschulte@klsmartin.com>,
uol@pengutronix.de, ore@pengutronix.de,
"Søren Andersen" <san@skov.dk>,
"Ahmad Fatoum" <a.fatoum@pengutronix.de>
Subject: [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options
Date: Thu, 22 Dec 2022 15:12:01 +0100 [thread overview]
Message-ID: <20221222141201.3087192-7-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20221222141201.3087192-1-a.fatoum@pengutronix.de>
Give the defconfig some color by enabling console colors during startup,
i.MX6 parallel LCD driver, backlight and some more options that were
noticed missing during debugging a skov-imx6 issue.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/configs/imx_v7_defconfig | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/configs/imx_v7_defconfig b/arch/arm/configs/imx_v7_defconfig
index 3cbec267fc87..6110a52e486f 100644
--- a/arch/arm/configs/imx_v7_defconfig
+++ b/arch/arm/configs/imx_v7_defconfig
@@ -72,11 +72,13 @@ CONFIG_BOOTM_OFTREE=y
CONFIG_BOOTM_OFTREE_UIMAGE=y
CONFIG_BLSPEC=y
CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION_DISK_EFI=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_STATE=y
CONFIG_BOOTCHOOSER=y
CONFIG_RESET_SOURCE=y
+CONFIG_MACHINE_ID=y
CONFIG_FASTBOOT_CMD_OEM=y
CONFIG_CMD_DMESG=y
CONFIG_LONGHELP=y
@@ -86,6 +88,7 @@ CONFIG_CMD_MEMINFO=y
CONFIG_CMD_ARM_MMUINFO=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_MMC_EXTCSD=y
+CONFIG_CMD_FCB=y
# CONFIG_CMD_BOOTU is not set
CONFIG_CMD_GO=y
CONFIG_CMD_RESET=y
@@ -117,6 +120,7 @@ CONFIG_CMD_MENU=y
CONFIG_CMD_MENU_MANAGEMENT=y
CONFIG_CMD_MENUTREE=y
CONFIG_CMD_SPLASH=y
+CONFIG_CMD_FBTEST=y
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_CRC=y
@@ -149,9 +153,14 @@ CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_AT803X_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
CONFIG_NET_USB=y
CONFIG_NET_USB_ASIX=y
CONFIG_NET_USB_SMSC95XX=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_MUX=y
CONFIG_MTD=y
CONFIG_MTD_RAW_DEVICE=y
CONFIG_MTD_DATAFLASH=y
@@ -180,8 +189,12 @@ CONFIG_VIDEO=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI=y
+CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL=y
CONFIG_DRIVER_VIDEO_SIMPLEFB=y
CONFIG_DRIVER_VIDEO_EDID=y
+CONFIG_DRIVER_VIDEO_BACKLIGHT=y
+CONFIG_DRIVER_VIDEO_BACKLIGHT_PWM=y
+CONFIG_DRIVER_VIDEO_SIMPLE_PANEL=y
CONFIG_MCI=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
CONFIG_MCI_IMX_ESDHC=y
@@ -219,4 +232,7 @@ CONFIG_FS_FAT_WRITE=y
CONFIG_FS_FAT_LFN=y
CONFIG_FS_UBIFS=y
CONFIG_FS_UBIFS_COMPRESSION_LZO=y
+CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
+CONFIG_FS_SQUASHFS=y
CONFIG_PNG=y
+CONFIG_DIGEST_SHA1_ARM=y
--
2.30.2
next prev parent reply other threads:[~2022-12-22 14:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-22 14:11 [PATCH 0/6] ARM: i.MX6: Fix LVDS splash on skov and some others Ahmad Fatoum
2022-12-22 14:11 ` [PATCH 1/6] clk: imx: set CLK_SET_RATE_NO_REPARENT for all muxes Ahmad Fatoum
2022-12-23 9:11 ` Marco Felsch
2022-12-22 14:11 ` [PATCH 2/6] clk: mux: forward round/set rate to parent if CLK_SET_RATE_PARENT Ahmad Fatoum
2022-12-22 14:11 ` [PATCH 3/6] ARM: i.MX6: skov: refactor LVDS/parallel device tree fixups Ahmad Fatoum
2022-12-23 9:14 ` Marco Felsch
2022-12-22 14:11 ` [PATCH 4/6] ARM: i.MX6: skov: fix LVDS deep probe Ahmad Fatoum
2022-12-23 9:08 ` Marco Felsch
2022-12-22 14:12 ` [PATCH 5/6] video: edid: print debug message on EDID read out error Ahmad Fatoum
2022-12-23 9:06 ` Marco Felsch
2022-12-22 14:12 ` Ahmad Fatoum [this message]
2022-12-23 9:10 ` [PATCH 6/6] ARM: configs: imx_v7_defconfig: enable some useful options Marco Felsch
2023-01-04 12:01 ` Sascha Hauer
2023-01-04 12:04 ` Ahmad Fatoum
2023-01-04 12:07 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221222141201.3087192-7-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=leif.middelschulte@klsmartin.com \
--cc=ore@pengutronix.de \
--cc=san@skov.dk \
--cc=uol@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox