mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org, Xogium <contact@xogium.me>
Subject: Re: [RFT PATCH] ARM: stm32mp: odyssey-som: use upstream device trees
Date: Mon, 23 Jan 2023 09:21:27 +0100	[thread overview]
Message-ID: <20230123082127.GO24755@pengutronix.de> (raw)
In-Reply-To: <20230116132911.1991963-1-a.fatoum@pengutronix.de>

On Mon, Jan 16, 2023 at 02:29:11PM +0100, Ahmad Fatoum wrote:
> When board support was first added, it used a version of the device tree
> of the Linux kernel mailing list. The device tree is now upstream, so
> replace the copy we have with the version already existing in dts/.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> I don't have the hardware, Cc'ing Xogium, who has this board and may be
> able to test this patch.
> ---
>  arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 294 ----------------------
>  arch/arm/dts/stm32mp157c-odyssey.dts      |   6 +-
>  arch/arm/dts/stm32mp157c-odyssey.dtsi     |  72 ------
>  3 files changed, 1 insertion(+), 371 deletions(-)
>  delete mode 100644 arch/arm/dts/stm32mp157c-odyssey-som.dtsi
>  delete mode 100644 arch/arm/dts/stm32mp157c-odyssey.dtsi

Applied, thanks

Sascha

> 
> diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> deleted file mode 100644
> index 1e5bd8bccb71..000000000000
> --- a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> +++ /dev/null
> @@ -1,294 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> -/*
> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
> - */
> -
> -/dts-v1/;
> -
> -#include <arm/stm32mp157.dtsi>
> -#include <arm/stm32mp15xc.dtsi>
> -#include <arm/stm32mp15-pinctrl.dtsi>
> -#include <arm/stm32mp15xxac-pinctrl.dtsi>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/mfd/st,stpmic1.h>
> -
> -/ {
> -	model = "Seeed Studio Odyssey-STM32MP157C SOM";
> -	compatible = "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
> -
> -	memory@c0000000 {
> -		device_type = "memory";
> -		reg = <0xc0000000 0x20000000>;
> -	};
> -
> -	reserved-memory {
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		ranges;
> -
> -		mcuram2: mcuram2@10000000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x10000000 0x40000>;
> -			no-map;
> -		};
> -
> -		vdev0vring0: vdev0vring0@10040000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x10040000 0x1000>;
> -			no-map;
> -		};
> -
> -		vdev0vring1: vdev0vring1@10041000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x10041000 0x1000>;
> -			no-map;
> -		};
> -
> -		vdev0buffer: vdev0buffer@10042000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x10042000 0x4000>;
> -			no-map;
> -		};
> -
> -		mcuram: mcuram@30000000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x30000000 0x40000>;
> -			no-map;
> -		};
> -
> -		retram: retram@38000000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x38000000 0x10000>;
> -			no-map;
> -		};
> -
> -		gpu_reserved: gpu@d4000000 {
> -			reg = <0xd4000000 0x4000000>;
> -			no-map;
> -		};
> -	};
> -
> -	led {
> -		compatible = "gpio-leds";
> -		led-blue {
> -			color = <LED_COLOR_ID_BLUE>;
> -			function = LED_FUNCTION_HEARTBEAT;
> -			gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
> -			linux,default-trigger = "heartbeat";
> -		};
> -	};
> -};
> -
> -&gpu {
> -	contiguous-area = <&gpu_reserved>;
> -	status = "okay";
> -};
> -
> -&i2c2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c2_pins_a>;
> -	i2c-scl-rising-time-ns = <185>;
> -	i2c-scl-falling-time-ns = <20>;
> -	status = "okay";
> -	/* spare dmas for other usage */
> -	/delete-property/dmas;
> -	/delete-property/dma-names;
> -
> -	pmic: stpmic@33 {
> -		compatible = "st,stpmic1";
> -		reg = <0x33>;
> -		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
> -		interrupt-controller;
> -		#interrupt-cells = <2>;
> -
> -		regulators {
> -			compatible = "st,stpmic1-regulators";
> -			ldo1-supply = <&v3v3>;
> -			ldo3-supply = <&vdd_ddr>;
> -			ldo6-supply = <&v3v3>;
> -			pwr_sw1-supply = <&bst_out>;
> -			pwr_sw2-supply = <&bst_out>;
> -
> -			vddcore: buck1 {
> -				regulator-name = "vddcore";
> -				regulator-min-microvolt = <800000>;
> -				regulator-max-microvolt = <1350000>;
> -				regulator-always-on;
> -				regulator-initial-mode = <0>;
> -				regulator-over-current-protection;
> -			};
> -
> -			vdd_ddr: buck2 {
> -				regulator-name = "vdd_ddr";
> -				regulator-min-microvolt = <1350000>;
> -				regulator-max-microvolt = <1350000>;
> -				regulator-always-on;
> -				regulator-initial-mode = <0>;
> -				regulator-over-current-protection;
> -			};
> -
> -			vdd: buck3 {
> -				regulator-name = "vdd";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-always-on;
> -				st,mask-reset;
> -				regulator-initial-mode = <0>;
> -				regulator-over-current-protection;
> -			};
> -
> -			v3v3: buck4 {
> -				regulator-name = "v3v3";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-always-on;
> -				regulator-over-current-protection;
> -				regulator-initial-mode = <0>;
> -			};
> -
> -			v1v8_audio: ldo1 {
> -				regulator-name = "v1v8_audio";
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-always-on;
> -				interrupts = <IT_CURLIM_LDO1 0>;
> -			};
> -
> -			v3v3_hdmi: ldo2 {
> -				regulator-name = "v3v3_hdmi";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-always-on;
> -				interrupts = <IT_CURLIM_LDO2 0>;
> -			};
> -
> -			vtt_ddr: ldo3 {
> -				regulator-name = "vtt_ddr";
> -				regulator-min-microvolt = <500000>;
> -				regulator-max-microvolt = <750000>;
> -				regulator-always-on;
> -				regulator-over-current-protection;
> -			};
> -
> -			vdd_usb: ldo4 {
> -				regulator-name = "vdd_usb";
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				interrupts = <IT_CURLIM_LDO4 0>;
> -			};
> -
> -			vdda: ldo5 {
> -				regulator-name = "vdda";
> -				regulator-min-microvolt = <2900000>;
> -				regulator-max-microvolt = <2900000>;
> -				interrupts = <IT_CURLIM_LDO5 0>;
> -				regulator-boot-on;
> -			};
> -
> -			v1v2_hdmi: ldo6 {
> -				regulator-name = "v1v2_hdmi";
> -				regulator-min-microvolt = <1200000>;
> -				regulator-max-microvolt = <1200000>;
> -				regulator-always-on;
> -				interrupts = <IT_CURLIM_LDO6 0>;
> -			};
> -
> -			vref_ddr: vref_ddr {
> -				regulator-name = "vref_ddr";
> -				regulator-always-on;
> -				regulator-over-current-protection;
> -			};
> -
> -			 bst_out: boost {
> -				regulator-name = "bst_out";
> -				interrupts = <IT_OCP_BOOST 0>;
> -			 };
> -
> -			vbus_otg: pwr_sw1 {
> -				regulator-name = "vbus_otg";
> -				interrupts = <IT_OCP_OTG 0>;
> -			 };
> -
> -			 vbus_sw: pwr_sw2 {
> -				regulator-name = "vbus_sw";
> -				interrupts = <IT_OCP_SWOUT 0>;
> -				regulator-active-discharge;
> -			 };
> -		};
> -
> -		onkey {
> -			compatible = "st,stpmic1-onkey";
> -			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
> -			interrupt-names = "onkey-falling", "onkey-rising";
> -			power-off-time-sec = <10>;
> -		};
> -
> -		watchdog {
> -			compatible = "st,stpmic1-wdt";
> -			status = "disabled";
> -		};
> -	};
> -};
> -
> -&ipcc {
> -	status = "okay";
> -};
> -
> -&iwdg2 {
> -	timeout-sec = <32>;
> -	status = "okay";
> -};
> -
> -&m4_rproc {
> -	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> -			<&vdev0vring1>, <&vdev0buffer>;
> -	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> -	mbox-names = "vq0", "vq1", "shutdown";
> -	interrupt-parent = <&exti>;
> -	interrupts = <68 1>;
> -	status = "okay";
> -};
> -
> -&rng1 {
> -	status = "okay";
> -};
> -
> -&rtc {
> -	status = "okay";
> -};
> -
> -&sdmmc2_d47_pins_a {
> -	pins {
> -		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
> -			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
> -			 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
> -			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
> -	};
> -};
> -
> -&sdmmc2_d47_sleep_pins_a {
> -	pins {
> -		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
> -			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
> -			 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
> -			 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
> -	};
> -};
> -
> -&sdmmc2 {
> -	pinctrl-names = "default", "opendrain", "sleep";
> -	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
> -	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
> -	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
> -	non-removable;
> -	no-sd;
> -	no-sdio;
> -	st,neg-edge;
> -	bus-width = <8>;
> -	vmmc-supply = <&v3v3>;
> -	vqmmc-supply = <&v3v3>;
> -	mmc-ddr-3_3v;
> -	status = "okay";
> -};
> -
> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dts b/arch/arm/dts/stm32mp157c-odyssey.dts
> index 0e395bdec961..6ced6363eb0f 100644
> --- a/arch/arm/dts/stm32mp157c-odyssey.dts
> +++ b/arch/arm/dts/stm32mp157c-odyssey.dts
> @@ -3,7 +3,7 @@
>   * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
>   */
>  
> -#include "stm32mp157c-odyssey.dtsi"
> +#include <arm/stm32mp157c-odyssey.dts>
>  #include "stm32mp151.dtsi"
>  
>  / {
> @@ -21,7 +21,3 @@
>  		};
>  	};
>  };
> -
> -&phy0 {
> -	reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
> -};
> diff --git a/arch/arm/dts/stm32mp157c-odyssey.dtsi b/arch/arm/dts/stm32mp157c-odyssey.dtsi
> deleted file mode 100644
> index 85a4f313ae33..000000000000
> --- a/arch/arm/dts/stm32mp157c-odyssey.dtsi
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> -/*
> - * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
> - */
> -
> -/dts-v1/;
> -
> -#include "stm32mp157c-odyssey-som.dtsi"
> -
> -/ {
> -	model = "Seeed Studio Odyssey-STM32MP157C Board";
> -	compatible = "seeed,stm32mp157c-odyssey",
> -		     "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
> -
> -	aliases {
> -		ethernet0 = &ethernet0;
> -		serial0 = &uart4;
> -	};
> -
> -	chosen {
> -		stdout-path = "serial0:115200n8";
> -	};
> -};
> -
> -&ethernet0 {
> -	status = "okay";
> -	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
> -	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
> -	pinctrl-names = "default", "sleep";
> -	phy-mode = "rgmii-id";
> -	max-speed = <1000>;
> -	phy-handle = <&phy0>;
> -
> -	mdio0 {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		compatible = "snps,dwmac-mdio";
> -		phy0: ethernet-phy@7 { /* KSZ9031RN */
> -			reg = <7>;
> -		};
> -	};
> -};
> -
> -&i2c1 {
> -	pinctrl-names = "default", "sleep";
> -	pinctrl-0 = <&i2c1_pins_a>;
> -	pinctrl-1 = <&i2c1_sleep_pins_a>;
> -	i2c-scl-rising-time-ns = <100>;
> -	i2c-scl-falling-time-ns = <7>;
> -	status = "okay";
> -	/delete-property/dmas;
> -	/delete-property/dma-names;
> -};
> -
> -&sdmmc1 {
> -	pinctrl-names = "default", "opendrain", "sleep";
> -	pinctrl-0 = <&sdmmc1_b4_pins_a>;
> -	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> -	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> -	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> -	disable-wp;
> -	st,neg-edge;
> -	bus-width = <4>;
> -	vmmc-supply = <&v3v3>;
> -	status = "okay";
> -};
> -
> -&uart4 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&uart4_pins_a>;
> -	status = "okay";
> -};
> -- 
> 2.30.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



  reply	other threads:[~2023-01-23  8:23 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-16 13:29 Ahmad Fatoum
2023-01-23  8:21 ` Sascha Hauer [this message]
2023-01-23  9:15   ` Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230123082127.GO24755@pengutronix.de \
    --to=sha@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=contact@xogium.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox