From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v1 04/20] ARM: dts: use DT labels instead of paths where possible
Date: Fri, 17 Feb 2023 18:30:41 +0100 [thread overview]
Message-ID: <20230217173057.1839835-5-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20230217173057.1839835-1-a.fatoum@pengutronix.de>
A number of things, where we use paths have labels already in the
upstream DT, so switch to that.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/dts/armada-370-mirabox-bb.dts | 2 +-
arch/arm/dts/armada-370-rn104-bb.dts | 2 +-
arch/arm/dts/armada-385-turris-omnia-bb.dts | 2 +-
arch/arm/dts/armada-xp-db-bb.dts | 2 +-
arch/arm/dts/armada-xp-gp-bb.dts | 2 +-
arch/arm/dts/armada-xp-openblocks-ax3-4-bb.dts | 2 +-
arch/arm/dts/armada-xp-rn2120-bb.dts | 2 +-
arch/arm/dts/at91sam9263ek.dts | 2 +-
arch/arm/dts/fsl-ls1046a-rdb.dts | 6 +++---
arch/arm/dts/imx50.dtsi | 2 +-
arch/arm/dts/imx51-genesi-efika-sb.dts | 7 ++++---
arch/arm/dts/socfpga_arria10_achilles.dts | 8 ++++----
arch/arm/dts/socfpga_arria10_mercury_aa1.dts | 8 ++++----
13 files changed, 24 insertions(+), 23 deletions(-)
diff --git a/arch/arm/dts/armada-370-mirabox-bb.dts b/arch/arm/dts/armada-370-mirabox-bb.dts
index 99263d485446..cdbce4af30fa 100644
--- a/arch/arm/dts/armada-370-mirabox-bb.dts
+++ b/arch/arm/dts/armada-370-mirabox-bb.dts
@@ -7,7 +7,7 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-370-rn104-bb.dts b/arch/arm/dts/armada-370-rn104-bb.dts
index 32f961e5292e..d19b4c70ee70 100644
--- a/arch/arm/dts/armada-370-rn104-bb.dts
+++ b/arch/arm/dts/armada-370-rn104-bb.dts
@@ -6,6 +6,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-385-turris-omnia-bb.dts b/arch/arm/dts/armada-385-turris-omnia-bb.dts
index 53bef01af758..5cfc57b3113b 100644
--- a/arch/arm/dts/armada-385-turris-omnia-bb.dts
+++ b/arch/arm/dts/armada-385-turris-omnia-bb.dts
@@ -2,6 +2,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-xp-db-bb.dts b/arch/arm/dts/armada-xp-db-bb.dts
index 7201f4aaa12e..d1b9fd2b452a 100644
--- a/arch/arm/dts/armada-xp-db-bb.dts
+++ b/arch/arm/dts/armada-xp-db-bb.dts
@@ -7,6 +7,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-xp-gp-bb.dts b/arch/arm/dts/armada-xp-gp-bb.dts
index 3836016425b9..9c115db78ee1 100644
--- a/arch/arm/dts/armada-xp-gp-bb.dts
+++ b/arch/arm/dts/armada-xp-gp-bb.dts
@@ -7,6 +7,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-xp-openblocks-ax3-4-bb.dts b/arch/arm/dts/armada-xp-openblocks-ax3-4-bb.dts
index e57cd8f0ce4b..38a206e47a3f 100644
--- a/arch/arm/dts/armada-xp-openblocks-ax3-4-bb.dts
+++ b/arch/arm/dts/armada-xp-openblocks-ax3-4-bb.dts
@@ -7,6 +7,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/armada-xp-rn2120-bb.dts b/arch/arm/dts/armada-xp-rn2120-bb.dts
index 969136b336fc..98458893ce57 100644
--- a/arch/arm/dts/armada-xp-rn2120-bb.dts
+++ b/arch/arm/dts/armada-xp-rn2120-bb.dts
@@ -6,6 +6,6 @@
/ {
chosen {
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
};
diff --git a/arch/arm/dts/at91sam9263ek.dts b/arch/arm/dts/at91sam9263ek.dts
index 29a615f4823e..cce137e39422 100644
--- a/arch/arm/dts/at91sam9263ek.dts
+++ b/arch/arm/dts/at91sam9263ek.dts
@@ -41,7 +41,7 @@
};
};
-&{/ahb/apb/mmc@fff84000} {
+&mmc1 {
pinctrl-0 = <
&pinctrl_board_mmc1
&pinctrl_mmc1_clk
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index d842387fa0da..10f716a974c0 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -120,14 +120,14 @@
dr_mode = "host";
};
-&{/soc/pcie@3400000} {
+&pcie1 {
status = "okay";
};
-&{/soc/pcie@3500000} {
+&pcie2 {
status = "okay";
};
-&{/soc/pcie@3600000} {
+&pcie3 {
status = "okay";
};
diff --git a/arch/arm/dts/imx50.dtsi b/arch/arm/dts/imx50.dtsi
index b5def2e4f67f..7ad8cea5a830 100644
--- a/arch/arm/dts/imx50.dtsi
+++ b/arch/arm/dts/imx50.dtsi
@@ -1,6 +1,6 @@
#include <arm/imx50.dtsi>
-&{/soc/bus@50000000} { /* AIPS1 */
+&aips1 {
usbphy1: usbphy@1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
diff --git a/arch/arm/dts/imx51-genesi-efika-sb.dts b/arch/arm/dts/imx51-genesi-efika-sb.dts
index 9afb670edffe..cf53da888043 100644
--- a/arch/arm/dts/imx51-genesi-efika-sb.dts
+++ b/arch/arm/dts/imx51-genesi-efika-sb.dts
@@ -394,9 +394,10 @@
&ipu_di1 {
interface-pix-fmt = "rgb565";
- endpoint {
- remote-endpoint = <&mtl017_in>;
- };
+};
+
+&ipu_di1_disp2 {
+ remote-endpoint = <&mtl017_in>;
};
&esdhc1 {
diff --git a/arch/arm/dts/socfpga_arria10_achilles.dts b/arch/arm/dts/socfpga_arria10_achilles.dts
index 6071dbfb49ee..4eafa8176ea4 100644
--- a/arch/arm/dts/socfpga_arria10_achilles.dts
+++ b/arch/arm/dts/socfpga_arria10_achilles.dts
@@ -108,19 +108,19 @@
};
};
-&{/soc/clkmgr@ffd04000/clocks/osc1} {
+&osc1 {
clock-frequency = <25000000>;
};
-&{/soc/clkmgr@ffd04000/clocks/cb_intosc_hs_div2_clk} {
+&cb_intosc_hs_div2_clk {
clock-frequency = <0>;
};
-&{/soc/clkmgr@ffd04000/clocks/cb_intosc_ls_clk} {
+&cb_intosc_ls_clk {
clock-frequency = <60000000>;
};
-&{/soc/clkmgr@ffd04000/clocks/f2s_free_clk} {
+&f2s_free_clk {
clock-frequency = <200000000>;
};
diff --git a/arch/arm/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
index 53ca8fd82c4b..7c6385329270 100644
--- a/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/dts/socfpga_arria10_mercury_aa1.dts
@@ -20,20 +20,20 @@
};
// provide reset-names until fixed in the upstream dts. Binding prescribes this property.
-&{/soc/mmc@ff808000} {
+&mmc {
reset-names = "reset";
};
// This clock is unused, but fixed-clocks need to have a clock-frequency set
-&{/soc/clkmgr@ffd04000/clocks/cb_intosc_hs_div2_clk} {
+&cb_intosc_hs_div2_clk {
clock-frequency = <0>;
};
-&{/soc/clkmgr@ffd04000/clocks/cb_intosc_ls_clk} {
+&cb_intosc_ls_clk {
clock-frequency = <60000000>;
};
-&{/soc/clkmgr@ffd04000/clocks/f2s_free_clk} {
+&f2s_free_clk {
clock-frequency = <200000000>;
};
--
2.30.2
next prev parent reply other threads:[~2023-02-17 17:33 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 17:30 [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 01/20] scripts/dtc: Update to upstream version v1.7.0 Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 02/20] scripts/dtc: update-dts-source.sh: don't fail if libfdt/ exists Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 03/20] Documentation: devicetree: describe new label-relative-path syntax Ahmad Fatoum
2023-02-17 17:30 ` Ahmad Fatoum [this message]
2023-02-17 17:30 ` [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes Ahmad Fatoum
2023-02-22 10:25 ` Sascha Hauer
2023-02-17 17:30 ` [PATCH v1 06/20] ARM: dts: tegra: switch to path and label references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 07/20] ARM: i.MX51: ccmx51: support newer device trees Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes Ahmad Fatoum
2023-02-17 18:08 ` Jules Maselbas
2023-02-17 17:30 ` [PATCH v1 09/20] ARM: i.MX6: karo-tx6x: fix now renamed DT nodes Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 10/20] ARM: dts: zii: use phandle-relative paths for extending nodes Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 11/20] ARM: dts: AT91: use label-relative " Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 12/20] ARM: dts: Layerscape: drop unneeded EEPROM node overriding Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 13/20] ARM: dts: Layerscape: use label-relative paths references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 14/20] ARM: dts: vf610-zii-cfu1: remove duplicate LED Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 15/20] ARM: dts: i.MX53: ccxmx53: remove unused /memory Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 16/20] ARM: dts: i.MX: use label-relative references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 17/20] ARM: dts: i.MX: delete now renamed memory nodes as well Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 18/20] ARM: dts: socfpga: cut down on NAND node duplication Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 19/20] ARM: dts: i.MX8MN: evk: use upstream flash node definition Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 20/20] ARM: dts: i.MX8MN: evk: reduce duplication in barebox-added nodes Ahmad Fatoum
2023-02-20 8:48 ` [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax Marco Felsch
2023-02-20 8:51 ` Ahmad Fatoum
2023-02-21 10:25 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230217173057.1839835-5-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox