From: Ahmad Fatoum <ahmad@a3f.at>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <ahmad@a3f.at>
Subject: [PATCH master 2/2] bootsource: use /chosen instead of /aliases/barebox,bootsource-
Date: Tue, 21 Feb 2023 08:07:35 +0100 [thread overview]
Message-ID: <20230221070735.1130600-2-ahmad@a3f.at> (raw)
In-Reply-To: <20230221070735.1130600-1-ahmad@a3f.at>
Aliases were a bad choice for this as barebox could end up calling MMC
devices /dev/barebox,bootsource-mmc0, which was not intended.
Move over to using chosen instead.
Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
---
.../devicetree/bindings/barebox/aliases.rst | 17 +++++++++++------
arch/arm/dts/rk356x.dtsi | 2 +-
common/bootsource.c | 6 +++---
include/bootsource.h | 2 +-
4 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/barebox/aliases.rst b/Documentation/devicetree/bindings/barebox/aliases.rst
index e6face2c3314..8d226cfab6eb 100644
--- a/Documentation/devicetree/bindings/barebox/aliases.rst
+++ b/Documentation/devicetree/bindings/barebox/aliases.rst
@@ -20,16 +20,21 @@ probing the node at ``&iwdg`` will be named ``wdog0``.
By default, barebox will assume the aliases in the DT to align with
the bootsource communicated by the firmware. If this is not the case,
a device tree override is possible via an
-``/aliases/barebox,bootsource-${bootsource}${bootsource_instance}``
+``/chosen/barebox,bootsource-${bootsource}${bootsource_instance}``
property:
.. code-block:: none
- &{/aliases} {
- mmc0 = &sdmmc0;
- mmc1 = &sdhci;
- barebox,bootsource-mmc0 = &sdhci;
- barebox,bootsource-mmc1 = &sdmmc0;
+ / {
+ aliases {
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ };
+
+ chosen {
+ barebox,bootsource-mmc0 = &sdhci;
+ barebox,bootsource-mmc1 = &sdmmc0;
+ };
};
This will ensure that when booting from MMC, ``/dev/mmc${bootsource_instance}``
diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
index 254450d78fa8..6a9cd14d2d5a 100644
--- a/arch/arm/dts/rk356x.dtsi
+++ b/arch/arm/dts/rk356x.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/ {
- aliases {
+ chosen {
barebox,bootsource-mmc0 = &sdhci;
barebox,bootsource-mmc1 = &sdmmc0;
barebox,bootsource-mmc2 = &sdmmc1;
diff --git a/common/bootsource.c b/common/bootsource.c
index 66bddf2dacf4..da528a5b9b19 100644
--- a/common/bootsource.c
+++ b/common/bootsource.c
@@ -137,7 +137,7 @@ void bootsource_set_raw_instance(int instance)
int bootsource_of_alias_xlate(enum bootsource src, int instance)
{
- char alias[sizeof("barebox,bootsource-harddisk4294967295")];
+ char chosen[sizeof("barebox,bootsource-harddisk4294967295")];
const char *bootsource_stem;
struct device_node *np;
int alias_id;
@@ -153,10 +153,10 @@ int bootsource_of_alias_xlate(enum bootsource src, int instance)
if (!bootsource_stem)
return BOOTSOURCE_INSTANCE_UNKNOWN;
- scnprintf(alias, sizeof(alias), "barebox,bootsource-%s%u",
+ scnprintf(chosen, sizeof(chosen), "barebox,bootsource-%s%u",
bootsource_stem, instance);
- np = of_find_node_by_alias(NULL, alias);
+ np = of_find_node_by_chosen(chosen, NULL);
if (!np)
return BOOTSOURCE_INSTANCE_UNKNOWN;
diff --git a/include/bootsource.h b/include/bootsource.h
index 381776a85a4c..05935b64a763 100644
--- a/include/bootsource.h
+++ b/include/bootsource.h
@@ -46,7 +46,7 @@ int bootsource_of_alias_xlate(enum bootsource bs, int instance);
* bootsource_set() will instead consult
* /aliases/barebox,bootsource-mmc1 which may point at a different
* device than mmc1. In absence of appropriate barebox,bootsource-*
- * alias, instance is set without translation.
+ * chosen property, instance is set without translation.
*/
int bootsource_set(enum bootsource bs, int instance);
--
2.38.3
next prev parent reply other threads:[~2023-02-21 7:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-21 7:07 [PATCH master 1/2] of: split part of of_get_stdoutpath into of_find_node_by_chosen Ahmad Fatoum
2023-02-21 7:07 ` Ahmad Fatoum [this message]
2023-02-21 7:52 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230221070735.1130600-2-ahmad@a3f.at \
--to=ahmad@a3f.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox