From: Sascha Hauer <sha@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax
Date: Tue, 21 Feb 2023 11:25:06 +0100 [thread overview]
Message-ID: <20230221102506.GE10447@pengutronix.de> (raw)
In-Reply-To: <20230217173057.1839835-1-a.fatoum@pengutronix.de>
On Fri, Feb 17, 2023 at 06:30:37PM +0100, Ahmad Fatoum wrote:
> The fresh v1.7.0 release of the device tree compiler now contains
> fancy new syntax:
>
> &{i2c1/at24@50} {
> partitions {
> /* something */
> };
> };
>
> instead of &{/soc/bus1/bus2/i2c@12345678/at24@50}, which is overly
> verbose or &i2c1 { at24@50 }, which will break once someone renames
> it upstream to please the schema checker.
>
> Let's update to this new DTC release and change a lot of non-portable DT
> we have to use this new syntax or use existing labels if available or
> just absolute paths. This also fixes some breakage, but most of it is
> future-proofing.
>
> I did some build testing and fixed the fallout, but Sascha's build of all
> configs may turn up some breakage too, which I would fix for v2.
>
> Ahmad Fatoum (20):
> scripts/dtc: Update to upstream version v1.7.0
> scripts/dtc: update-dts-source.sh: don't fail if libfdt/ exists
> Documentation: devicetree: describe new label-relative-path syntax
> ARM: dts: use DT labels instead of paths where possible
> MIPS: dts: ath79: ar9331: use path references when extending nodes
> ARM: dts: tegra: switch to path and label references
> ARM: i.MX51: ccmx51: support newer device trees
> ARM: i.MX6: gw54xx: rename watchdog nodes
> ARM: i.MX6: karo-tx6x: fix now renamed DT nodes
> ARM: dts: zii: use phandle-relative paths for extending nodes
> ARM: dts: AT91: use label-relative paths for extending nodes
> ARM: dts: Layerscape: drop unneeded EEPROM node overriding
> ARM: dts: Layerscape: use label-relative paths references
> ARM: dts: vf610-zii-cfu1: remove duplicate LED
> ARM: dts: i.MX53: ccxmx53: remove unused /memory
> ARM: dts: i.MX: use label-relative references
> ARM: dts: i.MX: delete now renamed memory nodes as well.
> ARM: dts: socfpga: cut down on NAND node duplication
> ARM: dts: i.MX8MN: evk: use upstream flash node definition
> ARM: dts: i.MX8MN: evk: reduce duplication in barebox-added nodes
Applied all patches that apply on master, so all except "ARM: dts: i.MX:
use label-relative references"
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-02-21 10:26 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 17:30 Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 01/20] scripts/dtc: Update to upstream version v1.7.0 Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 02/20] scripts/dtc: update-dts-source.sh: don't fail if libfdt/ exists Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 03/20] Documentation: devicetree: describe new label-relative-path syntax Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 04/20] ARM: dts: use DT labels instead of paths where possible Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 05/20] MIPS: dts: ath79: ar9331: use path references when extending nodes Ahmad Fatoum
2023-02-22 10:25 ` Sascha Hauer
2023-02-17 17:30 ` [PATCH v1 06/20] ARM: dts: tegra: switch to path and label references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 07/20] ARM: i.MX51: ccmx51: support newer device trees Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 08/20] ARM: i.MX6: gw54xx: rename watchdog nodes Ahmad Fatoum
2023-02-17 18:08 ` Jules Maselbas
2023-02-17 17:30 ` [PATCH v1 09/20] ARM: i.MX6: karo-tx6x: fix now renamed DT nodes Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 10/20] ARM: dts: zii: use phandle-relative paths for extending nodes Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 11/20] ARM: dts: AT91: use label-relative " Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 12/20] ARM: dts: Layerscape: drop unneeded EEPROM node overriding Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 13/20] ARM: dts: Layerscape: use label-relative paths references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 14/20] ARM: dts: vf610-zii-cfu1: remove duplicate LED Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 15/20] ARM: dts: i.MX53: ccxmx53: remove unused /memory Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 16/20] ARM: dts: i.MX: use label-relative references Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 17/20] ARM: dts: i.MX: delete now renamed memory nodes as well Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 18/20] ARM: dts: socfpga: cut down on NAND node duplication Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 19/20] ARM: dts: i.MX8MN: evk: use upstream flash node definition Ahmad Fatoum
2023-02-17 17:30 ` [PATCH v1 20/20] ARM: dts: i.MX8MN: evk: reduce duplication in barebox-added nodes Ahmad Fatoum
2023-02-20 8:48 ` [PATCH v1 00/20] dts: avoid DT breakage new fancy DTC v1.7.0 syntax Marco Felsch
2023-02-20 8:51 ` Ahmad Fatoum
2023-02-21 10:25 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230221102506.GE10447@pengutronix.de \
--to=sha@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox