mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 49/50] ARM: Add multi_v7_defconfig
Date: Fri,  3 Mar 2023 10:21:30 +0100	[thread overview]
Message-ID: <20230303092131.3063587-50-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20230303092131.3063587-1-s.hauer@pengutronix.de>

This adds a multi_v7_defconfig that includes support for:

- i.MX
- omap
- Rockchip
- bcm283x
- vexpress
- STM32MP

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/multi_v7_defconfig | 361 ++++++++++++++++++++++++++++
 1 file changed, 361 insertions(+)
 create mode 100644 arch/arm/configs/multi_v7_defconfig

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
new file mode 100644
index 0000000000..d83e503671
--- /dev/null
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -0,0 +1,361 @@
+CONFIG_ARCH_BCM283X=y
+CONFIG_ARCH_IMX=y
+CONFIG_ARCH_OMAP_MULTI=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_CACHE_L2X0=y
+CONFIG_MACH_RPI=y
+CONFIG_MACH_RPI2=y
+CONFIG_MACH_RPI3=y
+CONFIG_MACH_RPI_CM3=y
+CONFIG_MACH_RPI4=y
+CONFIG_MACH_KINDLE_MX50=y
+CONFIG_MACH_CCMX51=y
+CONFIG_MACH_EFIKA_MX_SMARTBOOK=y
+CONFIG_MACH_FREESCALE_MX51_PDK=y
+CONFIG_MACH_CCMX53=y
+CONFIG_MACH_FREESCALE_MX53_LOCO=y
+CONFIG_MACH_GUF_VINCELL=y
+CONFIG_MACH_TX53=y
+CONFIG_MACH_TQMA53=y
+CONFIG_MACH_FREESCALE_MX53_VMX53=y
+CONFIG_MACH_ZII_RDU1=y
+CONFIG_MACH_ADVANTECH_ROM_742X=y
+CONFIG_MACH_NITROGEN6=y
+CONFIG_MACH_CM_FX6=y
+CONFIG_MACH_REALQ7=y
+CONFIG_MACH_DFI_FS700_M60=y
+CONFIG_MACH_DIGI_CCIMX6ULSBCPRO=y
+CONFIG_MACH_ELTEC_HIPERCAM=y
+CONFIG_MACH_EMBEDSKY_E9=y
+CONFIG_MACH_EMBEST_MARSBOARD=y
+CONFIG_MACH_EMBEST_RIOTBOARD=y
+CONFIG_MACH_SABRELITE=y
+CONFIG_MACH_SABRESD=y
+CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB=y
+CONFIG_MACH_UDOO=y
+CONFIG_MACH_UDOO_NEO=y
+CONFIG_MACH_GUF_SANTARO=y
+CONFIG_MACH_GW_VENTANA=y
+CONFIG_MACH_GRINN_LITEBOARD=y
+CONFIG_MACH_TX6X=y
+CONFIG_MACH_KONTRON_SAMX6I=y
+CONFIG_MACH_NOVENA=y
+CONFIG_MACH_NXP_IMX6ULL_EVK=y
+CONFIG_MACH_PHYTEC_SOM_IMX6=y
+CONFIG_MACH_PROTONIC_IMX6=y
+CONFIG_MACH_SKOV_IMX6=y
+CONFIG_MACH_SOLIDRUN_MICROSOM=y
+CONFIG_MACH_TECHNEXION_PICO_HOBBIT=y
+CONFIG_MACH_TECHNEXION_WANDBOARD=y
+CONFIG_MACH_TQMA6X=y
+CONFIG_MACH_VARISCITE_MX6=y
+CONFIG_MACH_WEBASTO_CCBV2=y
+CONFIG_MACH_GK802=y
+CONFIG_MACH_ZII_RDU2=y
+CONFIG_MACH_MEERKAT96=y
+CONFIG_MACH_AC_SXB=y
+CONFIG_MACH_WARP7=y
+CONFIG_MACH_FREESCALE_MX7_SABRESD=y
+CONFIG_MACH_PHYTEC_PHYCORE_IMX7=y
+CONFIG_MACH_ZII_IMX7D_DEV=y
+CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR=y
+CONFIG_MACH_VF610_TWR=y
+CONFIG_MACH_ZII_VF610_DEV=y
+CONFIG_IMX_IIM_FUSE_BLOW=y
+CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO=y
+CONFIG_BAREBOX_UPDATE_AM33XX_NAND=y
+CONFIG_BAREBOX_UPDATE_AM33XX_EMMC=y
+CONFIG_MACH_AFI_GF=y
+CONFIG_MACH_BEAGLE=y
+CONFIG_MACH_BEAGLEBONE=y
+CONFIG_MACH_MYIRTECH_X335X=y
+CONFIG_MACH_PHYTEC_SOM_AM335X=y
+CONFIG_MACH_VSCOM_BALTOS=y
+CONFIG_MACH_WAGO_PFC_AM35XX=y
+CONFIG_MACH_RADXA_ROCK=y
+CONFIG_MACH_PHYTEC_SOM_RK3288=y
+CONFIG_MACH_STM32MP13XX_DK=y
+CONFIG_MACH_STM32MP15XX_DKX=y
+CONFIG_MACH_LXA_MC1=y
+CONFIG_MACH_SEEED_ODYSSEY=y
+CONFIG_MACH_STM32MP15X_EV1=y
+CONFIG_MACH_PROTONIC_STM32MP1=y
+CONFIG_MACH_PHYTEC_PHYCORE_STM32MP1=y
+CONFIG_MACH_VEXPRESS=y
+CONFIG_MACH_VIRT=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_PSCI=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="barebox> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+# CONFIG_TIMESTAMP is not set
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+CONFIG_BOOTM_AIMAGE=y
+CONFIG_BLSPEC=y
+CONFIG_CONSOLE_ACTIVATE_NONE=y
+CONFIG_CONSOLE_ALLOW_COLOR=y
+CONFIG_PBL_CONSOLE=y
+CONFIG_CONSOLE_RATP=y
+CONFIG_RATP_CMD_I2C=y
+CONFIG_RATP_CMD_GPIO=y
+CONFIG_PARTITION_DISK_EFI=y
+# CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE is not set
+# CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_REBOOT_MODE=y
+CONFIG_STATE=y
+CONFIG_BOOTCHOOSER=y
+CONFIG_RESET_SOURCE=y
+CONFIG_MACHINE_ID=y
+CONFIG_FASTBOOT_CMD_OEM=y
+CONFIG_CMD_DMESG=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ARM_MMUINFO=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MMC_EXTCSD=y
+CONFIG_CMD_FCB=y
+# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_BOOTCHOOSER=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_UBIFORMAT=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_DEFAULTENV=y
+CONFIG_CMD_LOADENV=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_SHA224SUM=y
+CONFIG_CMD_SHA256SUM=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_READF=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_MENUTREE=y
+CONFIG_CMD_SPLASH=y
+CONFIG_CMD_FBTEST=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_FLASH=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_NANDTEST=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_USBGADGET=y
+CONFIG_CMD_WD=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_OF_DIFF=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OF_DISPLAY_TIMINGS=y
+CONFIG_CMD_OF_FIXUP_STATUS=y
+CONFIG_CMD_OF_OVERLAY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_STATE=y
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_NET_FASTBOOT=y
+CONFIG_OF_BAREBOX_DRIVERS=y
+CONFIG_AIODEV=y
+CONFIG_STM32_ADC=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_DRIVER_SERIAL_STM32=y
+CONFIG_DRIVER_SERIAL_NS16550=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_DRIVER_NET_CPSW=y
+CONFIG_DRIVER_NET_DAVINCI_EMAC=y
+CONFIG_DRIVER_NET_DESIGNWARE_STM32=y
+CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_DRIVER_NET_SMC91111=y
+CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_NET_USB=y
+CONFIG_NET_USB_ASIX=y
+CONFIG_NET_USB_SMSC95XX=y
+CONFIG_DRIVER_SPI_OMAP3=y
+CONFIG_DRIVER_SPI_STM32=y
+CONFIG_I2C_GPIO=y
+CONFIG_I2C_OMAP=y
+CONFIG_I2C_STM32=y
+CONFIG_I2C_MUX=y
+CONFIG_MTD=y
+CONFIG_MTD_RAW_DEVICE=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_DRIVER_CFI=y
+CONFIG_NAND=y
+CONFIG_NAND_ALLOW_ERASE_BAD=y
+CONFIG_NAND_IMX=y
+CONFIG_NAND_MXS=y
+CONFIG_NAND_OMAP_GPMC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_DISK_AHCI=y
+CONFIG_DISK_AHCI_IMX=y
+CONFIG_DISK_INTF_PLATFORM_IDE=y
+CONFIG_DISK_PATA_IMX=y
+CONFIG_USB_HOST=y
+CONFIG_USB_IMX_CHIPIDEA=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_USB_DWC2_GADGET=y
+CONFIG_USB_EHCI=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DFU=y
+CONFIG_USB_GADGET_SERIAL=y
+CONFIG_USB_GADGET_FASTBOOT=y
+CONFIG_USB_MUSB=y
+CONFIG_USB_MUSB_AM335X=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_VIDEO=y
+CONFIG_DRIVER_VIDEO_FB_SSD1307=y
+CONFIG_DRIVER_VIDEO_STM32_LTDC=y
+CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
+CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
+CONFIG_DRIVER_VIDEO_IMX_IPUV3_HDMI=y
+CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL=y
+CONFIG_DRIVER_VIDEO_SIMPLEFB=y
+CONFIG_DRIVER_VIDEO_EDID=y
+CONFIG_DRIVER_VIDEO_BACKLIGHT=y
+CONFIG_DRIVER_VIDEO_BACKLIGHT_PWM=y
+CONFIG_DRIVER_VIDEO_SIMPLE_PANEL=y
+CONFIG_MCI=y
+CONFIG_MCI_STARTUP=y
+CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+CONFIG_MCI_DW=y
+CONFIG_MCI_DW_PIO=y
+CONFIG_MCI_BCM283X=y
+CONFIG_MCI_BCM283X_SDHOST=y
+CONFIG_MCI_IMX_ESDHC=y
+CONFIG_MCI_OMAP_HSMMC=y
+CONFIG_MCI_MMCI=y
+CONFIG_MCI_STM32_SDMMC2=y
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_MFD_DA9063=y
+CONFIG_MFD_MC34704=y
+CONFIG_MFD_MC9SDZ60=y
+CONFIG_MFD_STMPE=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_MFD_STM32_TIMERS=y
+CONFIG_STATE_DRV=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_PWM=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_EEPROM_AT25=y
+CONFIG_EEPROM_AT24=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_SPECIALKEYS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_POLLER=y
+CONFIG_WATCHDOG_IMX=y
+CONFIG_WATCHDOG_OMAP=y
+CONFIG_STM32_IWDG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_PWM_STM32=y
+CONFIG_HWRNG=y
+CONFIG_HWRNG_STM32=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_MXS_APBH_DMA=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_RASPBERRYPI_EXP=y
+CONFIG_GPIO_STMPE=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_IMX_OCOTP_WRITE=y
+CONFIG_STM32_BSEC=y
+CONFIG_BUS_OMAP_GPMC=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_REGULATOR_ARM_SCMI=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_REMOTEPROC=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_GENERIC_PHY=y
+CONFIG_USB_NOP_XCEIV=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_RESET_STM32=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_FS_CRAMFS=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=8
+CONFIG_FS_NFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_FS_UBIFS=y
+CONFIG_FS_UBIFS_COMPRESSION_LZO=y
+CONFIG_FS_UBIFS_COMPRESSION_ZLIB=y
+CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
+CONFIG_FS_BPKFS=y
+CONFIG_FS_UIMAGEFS=y
+CONFIG_FS_PSTORE=y
+CONFIG_FS_PSTORE_CONSOLE=y
+CONFIG_FS_PSTORE_RAMOOPS=y
+CONFIG_FS_SQUASHFS=y
+CONFIG_FS_RATP=y
+CONFIG_PNG=y
+CONFIG_DIGEST_SHA1_ARM=y
-- 
2.30.2




  parent reply	other threads:[~2023-03-03  9:25 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-03  9:20 [PATCH 00/50] ARM: multi-arch support Sascha Hauer
2023-03-03  9:20 ` [PATCH 01/50] ARM: i.MX: Move mach header files to include/mach/imx Sascha Hauer
2023-03-03  9:20 ` [PATCH 02/50] ARM: Rockchip: Move mach header files to include/mach/rockchip Sascha Hauer
2023-03-03  9:20 ` [PATCH 03/50] ARM: Zynqmp: Move mach header files to include/mach/zynqmp Sascha Hauer
2023-03-03  9:20 ` [PATCH 04/50] ARM: mvebu: Move mach header files to include/mach/mvebu Sascha Hauer
2023-03-03  9:20 ` [PATCH 05/50] ARM: davinci: Move mach header files to include/mach/davinci Sascha Hauer
2023-03-03  9:20 ` [PATCH 06/50] ARM: bcm283x: Move mach header files to include/mach/bcm283x Sascha Hauer
2023-03-03  9:20 ` [PATCH 07/50] ARM: stm32mp: Move mach header files to include/mach/stm32mp Sascha Hauer
2023-03-03  9:20 ` [PATCH 08/50] ARM: zynq: Move mach header files to include/mach/zynq Sascha Hauer
2023-03-03  9:20 ` [PATCH 09/50] ARM: vexpress: Move mach header files to include/mach/vexpress Sascha Hauer
2023-03-03  9:20 ` [PATCH 10/50] ARM: versatile: Move mach header files to include/mach/versatile Sascha Hauer
2023-03-03  9:20 ` [PATCH 11/50] ARM: layerscape: Move mach header files to include/mach/layerscape Sascha Hauer
2023-03-03  9:20 ` [PATCH 12/50] ARM: tegra: Move mach header files to include/mach/tegra Sascha Hauer
2023-03-03  9:20 ` [PATCH 13/50] ARM: uemd: Move mach header files to include/mach/uemd Sascha Hauer
2023-03-03  9:20 ` [PATCH 14/50] ARM: socfpga: Move mach header files to include/mach/socfpga Sascha Hauer
2023-03-03  9:20 ` [PATCH 15/50] ARM: pxa: Move mach header files to include/mach/pxa Sascha Hauer
2023-03-03  9:20 ` [PATCH 16/50] ARM: omap: Move mach header files to include/mach/omap Sascha Hauer
2023-03-03  9:20 ` [PATCH 17/50] ARM: nomadik: Move mach header files to include/mach/nomadik Sascha Hauer
2023-03-03  9:20 ` [PATCH 18/50] ARM: mxs: Move mach header files to include/mach/mxs Sascha Hauer
2023-03-03  9:21 ` [PATCH 19/50] ARM: ep93xx: Move mach header files to include/mach/ep93xx Sascha Hauer
2023-03-03  9:21 ` [PATCH 20/50] ARM: digic: Move mach header files to include/mach/digic Sascha Hauer
2023-03-03  9:21 ` [PATCH 21/50] ARM: clps711x: Move mach header files to include/mach/clps711x Sascha Hauer
2023-03-03  9:21 ` [PATCH 22/50] ARM: at91: Move mach header files to include/mach/at91 Sascha Hauer
2023-03-03  9:21 ` [PATCH 23/50] ARM: Drop mach dir include path Sascha Hauer
2023-03-03  9:21 ` [PATCH 24/50] include/mach/: use unique double inclusion protectors Sascha Hauer
2023-03-03  9:21 ` [PATCH 25/50] ARM: i.MX: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 26/50] debug_ll ns16550: Do not define PUTC_LL() Sascha Hauer
2023-03-03  9:21 ` [PATCH 27/50] debug_ll ns16550: Use CONFIG_BAUDRATE Sascha Hauer
2023-03-03  9:21 ` [PATCH 28/50] ARM: Rockchip: Use ns16550 debug_ll helper Sascha Hauer
2023-03-03  9:21 ` [PATCH 29/50] ARM: Rockchip: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 30/50] ARM: omap: Use ns16550 debug_ll helper Sascha Hauer
2023-03-03  9:21 ` [PATCH 31/50] ARM: omap: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 32/50] ARM: omap: usbboot: Enable USB communication when needed Sascha Hauer
2023-03-03  9:21 ` [PATCH 33/50] ARM: omap: Make multi-arch safe Sascha Hauer
2023-03-03  9:21 ` [PATCH 34/50] ARM: Rockchip: Make safe for multi-arch Sascha Hauer
2023-03-03  9:21 ` [PATCH 35/50] pm_domains: Enable explicitly when we have power-domain providers Sascha Hauer
2023-03-03  9:21 ` [PATCH 36/50] ARM: add multi-arch support Sascha Hauer
2023-03-03  9:21 ` [PATCH 37/50] ARM: omap: Add support for multi-arch Sascha Hauer
2023-03-03  9:21 ` [PATCH 38/50] ARM: zynqmp: Add multi-arch support Sascha Hauer
2023-03-03  9:21 ` [PATCH 39/50] ARM: i.MX: Add missing include Sascha Hauer
2023-03-03  9:21 ` [PATCH 40/50] ARM: i.MX: move board selection into menu Sascha Hauer
2023-03-03  9:21 ` [PATCH 41/50] ARM: stm32mp: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 42/50] ARM: stm32mp: Make safe for multi-arch Sascha Hauer
2023-03-03  9:21 ` [PATCH 43/50] ARM: stm32mp: Add multi-arch support Sascha Hauer
2023-03-03  9:21 ` [PATCH 44/50] ARM: vexpress: Drop unnecessary initcall Sascha Hauer
2023-03-03  9:21 ` [PATCH 45/50] ARM: vexpress: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 46/50] ARM: vexpress: Add multi-arch support Sascha Hauer
2023-03-03  9:21 ` [PATCH 47/50] ARM: bcm283x: Only provide PUTC_LL() when activated Sascha Hauer
2023-03-03  9:21 ` [PATCH 48/50] ARM: bcm283x: Add multi-arch support Sascha Hauer
2023-03-03  9:21 ` Sascha Hauer [this message]
2023-03-03  9:21 ` [PATCH 50/50] ARM: Add multi_v8_defconfig Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230303092131.3063587-50-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox