From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Fri, 21 Apr 2023 12:08:42 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1ppnh3-00BPUL-AF for lore@lore.pengutronix.de; Fri, 21 Apr 2023 12:08:42 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1ppnh2-0001Vn-Bg for lore@pengutronix.de; Fri, 21 Apr 2023 12:08:41 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: Content-Type:MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc: To:From:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=CuyP5W6BtkVxTaieI68cMWlq/vk4+B7Q8/A8aJXDXiU=; b=vGODRDFFAXe0DU/J0f1LG31Zlj aQ2CZPs0EzDN+gYdNzDKrhv7r4cUGJyOZrGHlbThWam48NfQzkyZps1AbIg3FCCGB+MxjMrWlsKlI xxU86ytTBxZJbILfR8EIY1lqHuSg61cXzibS9en75mdmi89mNLuRoa2oklOgAQPxgj5TmX9VYfMMb KDHKchxhCAVS2CBu2XRqquoQYpZ6KiYx91C0AW+oASLCYP6fEkduylnBx3yHkou3YvufcIkkjHP1b h3sT727kvyzjf1enGYkRjt93kuCZcfds82bZdLbUOuvLOpVJHyZuZT/rrtSLgrDlmSo1ADrbuzuwX JzJXKZBg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1ppnfm-00AQ5F-10; Fri, 21 Apr 2023 10:07:22 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1ppnfd-00AQ1c-0w for barebox@lists.infradead.org; Fri, 21 Apr 2023 10:07:17 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1ppnfa-00011D-Og; Fri, 21 Apr 2023 12:07:10 +0200 Received: from [2a0a:edc0:0:1101:1d::54] (helo=dude05.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtp (Exim 4.94.2) (envelope-from ) id 1ppnfa-00Clhf-4L; Fri, 21 Apr 2023 12:07:10 +0200 Received: from afa by dude05.red.stw.pengutronix.de with local (Exim 4.94.2) (envelope-from ) id 1ppnfY-00C2ON-HN; Fri, 21 Apr 2023 12:07:08 +0200 From: Ahmad Fatoum To: barebox@lists.infradead.org Cc: Ahmad Fatoum Date: Fri, 21 Apr 2023 12:06:39 +0200 Message-Id: <20230421100642.2867651-3-a.fatoum@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230421100642.2867651-1-a.fatoum@pengutronix.de> References: <20230421100642.2867651-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230421_030713_666506_71D417F4 X-CRM114-Status: GOOD ( 27.34 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.ext.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-4.8 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 2/5] phy: stm32-usphyc: sync with Linux v6.3-rc5 X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.ext.pengutronix.de) DT binding changed in the meantime and the PHY is now clock provider to the EHCI. Sync the driver to enable use of the EHCI. Signed-off-by: Ahmad Fatoum --- drivers/phy/phy-stm32-usbphyc.c | 321 +++++++++++++++++++++++++++++--- include/linux/units.h | 111 +++++++++++ 2 files changed, 406 insertions(+), 26 deletions(-) create mode 100644 include/linux/units.h diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c index 3ccbc7b9027a..ac82b019f44c 100644 --- a/drivers/phy/phy-stm32-usbphyc.c +++ b/drivers/phy/phy-stm32-usbphyc.c @@ -14,11 +14,14 @@ #include #include #include +#include #include +#include #define STM32_USBPHYC_PLL 0x0 #define STM32_USBPHYC_MISC 0x8 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) +#define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) #define STM32_USBPHYC_VERSION 0x3F4 /* STM32_USBPHYC_PLL bit fields */ @@ -40,6 +43,83 @@ #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) +/* STM32_USBPHYC_TUNE bit fields */ +#define INCURREN BIT(0) +#define INCURRINT BIT(1) +#define LFSCAPEN BIT(2) +#define HSDRVSLEW BIT(3) +#define HSDRVDCCUR BIT(4) +#define HSDRVDCLEV BIT(5) +#define HSDRVCURINCR BIT(6) +#define FSDRVRFADJ BIT(7) +#define HSDRVRFRED BIT(8) +#define HSDRVCHKITRM GENMASK(12, 9) +#define HSDRVCHKZTRM GENMASK(14, 13) +#define OTPCOMP GENMASK(19, 15) +#define SQLCHCTL GENMASK(21, 20) +#define HDRXGNEQEN BIT(22) +#define HSRXOFF GENMASK(24, 23) +#define HSFALLPREEM BIT(25) +#define SHTCCTCTLPROT BIT(26) +#define STAGSEL BIT(27) + +enum boosting_vals { + BOOST_1000_UA = 1000, + BOOST_2000_UA = 2000, +}; + +enum dc_level_vals { + DC_NOMINAL, + DC_PLUS_5_TO_7_MV, + DC_PLUS_10_TO_14_MV, + DC_MINUS_5_TO_7_MV, + DC_MAX, +}; + +enum current_trim { + CUR_NOMINAL, + CUR_PLUS_1_56_PCT, + CUR_PLUS_3_12_PCT, + CUR_PLUS_4_68_PCT, + CUR_PLUS_6_24_PCT, + CUR_PLUS_7_8_PCT, + CUR_PLUS_9_36_PCT, + CUR_PLUS_10_92_PCT, + CUR_PLUS_12_48_PCT, + CUR_PLUS_14_04_PCT, + CUR_PLUS_15_6_PCT, + CUR_PLUS_17_16_PCT, + CUR_PLUS_19_01_PCT, + CUR_PLUS_20_58_PCT, + CUR_PLUS_22_16_PCT, + CUR_PLUS_23_73_PCT, + CUR_MAX, +}; + +enum impedance_trim { + IMP_NOMINAL, + IMP_MINUS_2_OHMS, + IMP_MINUS_4_OMHS, + IMP_MINUS_6_OHMS, + IMP_MAX, +}; + +enum squelch_level { + SQLCH_NOMINAL, + SQLCH_PLUS_7_MV, + SQLCH_MINUS_5_MV, + SQLCH_PLUS_14_MV, + SQLCH_MAX, +}; + +enum rx_offset { + NO_RX_OFFSET, + RX_OFFSET_PLUS_5_MV, + RX_OFFSET_PLUS_10_MV, + RX_OFFSET_MINUS_5_MV, + RX_OFFSET_MAX, +}; + /* STM32_USBPHYC_VERSION bit fields */ #define MINREV GENMASK(3, 0) #define MAJREV GENMASK(7, 4) @@ -47,7 +127,6 @@ #define PLL_FVCO_MHZ 2880 #define PLL_INFF_MIN_RATE_HZ 19200000 #define PLL_INFF_MAX_RATE_HZ 38400000 -#define HZ_PER_MHZ 1000000L struct pll_params { u8 ndiv; @@ -57,30 +136,34 @@ struct pll_params { struct stm32_usbphyc_phy { struct phy *phy; struct stm32_usbphyc *usbphyc; + struct regulator *vbus; u32 index; bool active; + u32 tune; }; struct stm32_usbphyc { struct device *dev; void __iomem *base; struct clk *clk; + struct reset_control *rst; struct stm32_usbphyc_phy **phys; int nphys; struct regulator *vdda1v1; struct regulator *vdda1v8; - int n_pll_cons; + atomic_t n_pll_cons; + struct clk_hw clk48_hw; int switch_setup; }; static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) { - writel(readl(reg) | bits, reg); + writel_relaxed(readl_relaxed(reg) | bits, reg); } static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) { - writel(readl(reg) & ~bits, reg); + writel_relaxed(readl_relaxed(reg) & ~bits, reg); } static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) @@ -168,7 +251,7 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) if (pll_params.frac) usbphyc_pll |= PLLFRACCTL | frac; - writel(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); + writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), @@ -185,7 +268,7 @@ static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) stm32_usbphyc_clr_bits(pll_reg, PLLEN); /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ - if (readl_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 50)) + if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 50)) dev_err(usbphyc->dev, "PLL not reset\n"); return stm32_usbphyc_regulators_disable(usbphyc); @@ -194,7 +277,7 @@ static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) { /* Check if a phy port is still active or clk48 in use */ - if (--usbphyc->n_pll_cons > 0) + if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) return 0; return __stm32_usbphyc_pll_disable(usbphyc); @@ -203,14 +286,14 @@ static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) { void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; - bool pllen = readl(pll_reg) & PLLEN; + bool pllen = readl_relaxed(pll_reg) & PLLEN; int ret; /* * Check if a phy port or clk48 prepare has configured the pll * and ensure the PLL is enabled */ - if (++usbphyc->n_pll_cons > 1 && pllen) + if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) return 0; if (pllen) { @@ -222,7 +305,7 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) ret = __stm32_usbphyc_pll_disable(usbphyc); if (ret) - return ret; + goto dec_n_pll_cons; } ret = stm32_usbphyc_regulators_enable(usbphyc); @@ -241,7 +324,7 @@ reg_disable: stm32_usbphyc_regulators_disable(usbphyc); dec_n_pll_cons: - usbphyc->n_pll_cons--; + atomic_dec(&usbphyc->n_pll_cons); return ret; } @@ -261,10 +344,10 @@ static int stm32_usbphyc_phy_init(struct phy *phy) return ret; /* Check that PLL Lock input to PHY is High */ - writel(monsel, usbphyc->base + reg_mon); - ret = readl_poll_timeout(usbphyc->base + reg_mon, monout, - (monout & STM32_USBPHYC_MON_OUT_LOCKP), - 1000); + writel_relaxed(monsel, usbphyc->base + reg_mon); + ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, + (monout & STM32_USBPHYC_MON_OUT_LOCKP), + 1000); if (ret) { dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", (u32)(monout & STM32_USBPHYC_MON_OUT)); @@ -285,7 +368,9 @@ static int stm32_usbphyc_phy_init(struct phy *phy) return 0; pll_disable: - return stm32_usbphyc_pll_disable(usbphyc); + stm32_usbphyc_pll_disable(usbphyc); + + return ret; } static int stm32_usbphyc_phy_exit(struct phy *phy) @@ -298,11 +383,177 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return stm32_usbphyc_pll_disable(usbphyc); } +static int stm32_usbphyc_phy_power_on(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_enable(usbphyc_phy->vbus); + + return 0; +} + +static int stm32_usbphyc_phy_power_off(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_disable(usbphyc_phy->vbus); + + return 0; +} + static const struct phy_ops stm32_usbphyc_phy_ops = { .init = stm32_usbphyc_phy_init, .exit = stm32_usbphyc_phy_exit, + .power_on = stm32_usbphyc_phy_power_on, + .power_off = stm32_usbphyc_phy_power_off, }; +static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + return stm32_usbphyc_pll_enable(usbphyc); +} + +static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + stm32_usbphyc_pll_disable(usbphyc); +} + +static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + return 48000000; +} + +static const struct clk_ops usbphyc_clk48_ops = { + .enable = stm32_usbphyc_clk48_prepare, + .disable = stm32_usbphyc_clk48_unprepare, + .recalc_rate = stm32_usbphyc_clk48_recalc_rate, +}; + +static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) +{ + struct device_node *node = usbphyc->dev->of_node; + struct clk_init_data init = { }; + int ret = 0; + + init.name = "ck_usbo_48m"; + init.ops = &usbphyc_clk48_ops; + + usbphyc->clk48_hw.init = &init; + + ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); + if (ret) + return ret; + + return of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); +} + +static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, + struct device_node *np, u32 index) +{ + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; + u32 reg = STM32_USBPHYC_TUNE(index); + u32 otpcomp, val; + int ret; + + /* Backup OTP compensation code */ + otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); + + ret = of_property_read_u32(np, "st,current-boost-microamp", &val); + if (ret != -EINVAL) { + if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) { + val = (val == BOOST_2000_UA) ? 1 : 0; + usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); + } + } + + if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) + usbphyc_phy->tune |= LFSCAPEN; + + if (of_property_read_bool(np, "st,decrease-hs-slew-rate")) + usbphyc_phy->tune |= HSDRVSLEW; + + ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); + if (ret != -EINVAL) { + if (!ret && val < DC_MAX) { + if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ + usbphyc_phy->tune |= HSDRVDCCUR; + } else if (val > 0) { /* Increases HS driver DC level */ + val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; + usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); + } + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); + } + } + + if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) + usbphyc_phy->tune |= FSDRVRFADJ; + + if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) + usbphyc_phy->tune |= HSDRVRFRED; + + ret = of_property_read_u32(np, "st,trim-hs-current", &val); + if (ret != -EINVAL) { + if (!ret && val < CUR_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); + } + + ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); + if (ret != -EINVAL) { + if (!ret && val < IMP_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); + } + + ret = of_property_read_u32(np, "st,tune-squelch-level", &val); + if (ret != -EINVAL) { + if (!ret && val < SQLCH_MAX) + usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); + } + + if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) + usbphyc_phy->tune |= HDRXGNEQEN; + + ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); + if (ret != -EINVAL) { + if (!ret && val < RX_OFFSET_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); + } + + if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) + usbphyc_phy->tune |= HSFALLPREEM; + + if (!of_property_read_bool(np, "st,no-lsfs-sc")) + usbphyc_phy->tune |= SHTCCTCTLPROT; + + if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) + usbphyc_phy->tune |= STAGSEL; + + /* Restore OTP compensation code */ + usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); + + /* + * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to + * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). + */ + writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); +} + static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, u32 utmi_switch) { @@ -399,8 +650,8 @@ static int stm32_usbphyc_probe(struct device *dev) * Wait for minimum width of powerdown pulse (ENABLE = Low): * we have to ensure the PLL is disabled before phys initialization. */ - if (readl_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, - pllen, !(pllen & PLLEN), 50)) { + if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, + pllen, !(pllen & PLLEN), 50)) { dev_warn(usbphyc->dev, "PLL not reset\n"); ret = -EPROBE_DEFER; goto clk_disable; @@ -416,17 +667,15 @@ static int stm32_usbphyc_probe(struct device *dev) usbphyc->vdda1v1 = regulator_get(dev, "vdda1v1"); if (IS_ERR(usbphyc->vdda1v1)) { - ret = PTR_ERR(usbphyc->vdda1v1); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get vdda1v1 supply: %d\n", ret); + ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1), + "failed to get vdda1v1 supply\n"); goto clk_disable; } usbphyc->vdda1v8 = regulator_get(dev, "vdda1v8"); if (IS_ERR(usbphyc->vdda1v8)) { - ret = PTR_ERR(usbphyc->vdda1v8); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get vdda1v8 supply: %d\n", ret); + ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8), + "failed to get vdda1v8 supply\n"); goto clk_disable; } @@ -456,6 +705,8 @@ static int stm32_usbphyc_probe(struct device *dev) ret = of_property_read_u32(child, "reg", &index); if (ret || index > usbphyc->nphys) { dev_err(&phy->dev, "invalid reg property: %d\n", ret); + if (!ret) + ret = -EINVAL; goto clk_disable; } @@ -468,6 +719,17 @@ static int stm32_usbphyc_probe(struct device *dev) usbphyc->phys[port]->index = index; usbphyc->phys[port]->active = false; + usbphyc->phys[port]->vbus = regulator_get(&phy->dev, "vbus"); + if (IS_ERR(usbphyc->phys[port]->vbus)) { + ret = PTR_ERR(usbphyc->phys[port]->vbus); + if (ret == -EPROBE_DEFER) + goto clk_disable; + usbphyc->phys[port]->vbus = NULL; + } + + /* Configure phy tuning */ + stm32_usbphyc_phy_tuning(usbphyc, child, index); + port++; } @@ -478,8 +740,14 @@ static int stm32_usbphyc_probe(struct device *dev) goto clk_disable; } - version = readl(usbphyc->base + STM32_USBPHYC_VERSION); - dev_info(dev, "registered rev: %lu.%lu\n", + ret = stm32_usbphyc_clk48_register(usbphyc); + if (ret) { + dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); + goto clk_disable; + } + + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); + dev_info(dev, "registered rev:%lu.%lu\n", FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); return 0; @@ -512,6 +780,7 @@ static const struct of_device_id stm32_usbphyc_of_match[] = { { .compatible = "st,stm32mp1-usbphyc", }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); static struct driver stm32_usbphyc_driver = { .name = "stm32-usbphyc", diff --git a/include/linux/units.h b/include/linux/units.h new file mode 100644 index 000000000000..120a2fc87b13 --- /dev/null +++ b/include/linux/units.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_UNITS_H +#define _LINUX_UNITS_H + +#include + +/* Metric prefixes in accordance with Système international (d'unités) */ +#define PETA 1000000000000000ULL +#define TERA 1000000000000ULL +#define GIGA 1000000000UL +#define MEGA 1000000UL +#define KILO 1000UL +#define HECTO 100UL +#define DECA 10UL +#define DECI 10UL +#define CENTI 100UL +#define MILLI 1000UL +#define MICRO 1000000UL +#define NANO 1000000000UL +#define PICO 1000000000000ULL +#define FEMTO 1000000000000000ULL + +#define NANOHZ_PER_HZ 1000000000UL +#define MICROHZ_PER_HZ 1000000UL +#define MILLIHZ_PER_HZ 1000UL +#define HZ_PER_KHZ 1000UL +#define KHZ_PER_MHZ 1000UL +#define HZ_PER_MHZ 1000000UL + +#define MILLIWATT_PER_WATT 1000UL +#define MICROWATT_PER_MILLIWATT 1000UL +#define MICROWATT_PER_WATT 1000000UL + +#define ABSOLUTE_ZERO_MILLICELSIUS -273150 + +static inline long milli_kelvin_to_millicelsius(long t) +{ + return t + ABSOLUTE_ZERO_MILLICELSIUS; +} + +static inline long millicelsius_to_milli_kelvin(long t) +{ + return t - ABSOLUTE_ZERO_MILLICELSIUS; +} + +#define MILLIDEGREE_PER_DEGREE 1000 +#define MILLIDEGREE_PER_DECIDEGREE 100 + +static inline long kelvin_to_millicelsius(long t) +{ + return milli_kelvin_to_millicelsius(t * MILLIDEGREE_PER_DEGREE); +} + +static inline long millicelsius_to_kelvin(long t) +{ + t = millicelsius_to_milli_kelvin(t); + + return DIV_ROUND_CLOSEST(t, MILLIDEGREE_PER_DEGREE); +} + +static inline long deci_kelvin_to_celsius(long t) +{ + t = milli_kelvin_to_millicelsius(t * MILLIDEGREE_PER_DECIDEGREE); + + return DIV_ROUND_CLOSEST(t, MILLIDEGREE_PER_DEGREE); +} + +static inline long celsius_to_deci_kelvin(long t) +{ + t = millicelsius_to_milli_kelvin(t * MILLIDEGREE_PER_DEGREE); + + return DIV_ROUND_CLOSEST(t, MILLIDEGREE_PER_DECIDEGREE); +} + +/** + * deci_kelvin_to_millicelsius_with_offset - convert Kelvin to Celsius + * @t: temperature value in decidegrees Kelvin + * @offset: difference between Kelvin and Celsius in millidegrees + * + * Return: temperature value in millidegrees Celsius + */ +static inline long deci_kelvin_to_millicelsius_with_offset(long t, long offset) +{ + return t * MILLIDEGREE_PER_DECIDEGREE - offset; +} + +static inline long deci_kelvin_to_millicelsius(long t) +{ + return milli_kelvin_to_millicelsius(t * MILLIDEGREE_PER_DECIDEGREE); +} + +static inline long millicelsius_to_deci_kelvin(long t) +{ + t = millicelsius_to_milli_kelvin(t); + + return DIV_ROUND_CLOSEST(t, MILLIDEGREE_PER_DECIDEGREE); +} + +static inline long kelvin_to_celsius(long t) +{ + return t + DIV_ROUND_CLOSEST(ABSOLUTE_ZERO_MILLICELSIUS, + MILLIDEGREE_PER_DEGREE); +} + +static inline long celsius_to_kelvin(long t) +{ + return t - DIV_ROUND_CLOSEST(ABSOLUTE_ZERO_MILLICELSIUS, + MILLIDEGREE_PER_DEGREE); +} + +#endif /* _LINUX_UNITS_H */ -- 2.39.2