mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Gerald Loacker <gerald.loacker@wolfvision.net>
To: barebox@lists.infradead.org
Cc: Gerald Loacker <gerald.loacker@wolfvision.net>
Subject: [PATCH 1/4] i2c: rockchip: fix i2c stop condition
Date: Fri, 08 Sep 2023 12:16:46 +0200	[thread overview]
Message-ID: <20230908-bugfix-i2c-rockchip-v1-1-f8235d811f6b@wolfvision.net> (raw)
In-Reply-To: <20230908-bugfix-i2c-rockchip-v1-0-f8235d811f6b@wolfvision.net>

The i2c bus gets disabled without sending a stop condition. This violates
i2c timing on the clock line. Fix this and include all related functions
(rk_i2c_send_start_bit, rk_i2c_send_stop_bit, rk_i2c_disable) onto the same
level.

Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
---
 drivers/i2c/busses/i2c-rockchip.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rockchip.c b/drivers/i2c/busses/i2c-rockchip.c
index 23bf4a55d7..1bca3e9913 100644
--- a/drivers/i2c/busses/i2c-rockchip.c
+++ b/drivers/i2c/busses/i2c-rockchip.c
@@ -222,10 +222,6 @@ static int rk_i2c_read(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
 	dev_dbg(dev, "rk_i2c_read: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
 	      chip, reg, r_len, b_len);
 
-	err = rk_i2c_send_start_bit(i2c);
-	if (err)
-		return err;
-
 	writel(I2C_MRXADDR_SET(1, chip << 1 | 1), &regs->mrxaddr);
 	if (r_len == 0) {
 		writel(0, &regs->mrxraddr);
@@ -294,8 +290,6 @@ static int rk_i2c_read(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
 i2c_exit:
 	if (err)
 		rk_i2c_show_regs(i2c);
-	rk_i2c_disable(i2c);
-
 	return err;
 }
 
@@ -315,9 +309,6 @@ static int rk_i2c_write(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
 
 	dev_dbg(dev, "rk_i2c_write: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
 	      chip, reg, r_len, b_len);
-	err = rk_i2c_send_start_bit(i2c);
-	if (err)
-		return err;
 
 	while (bytes_remain_len) {
 		if (bytes_remain_len > RK_I2C_FIFO_SIZE)
@@ -370,8 +361,6 @@ static int rk_i2c_write(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
 i2c_exit:
 	if (err)
 		rk_i2c_show_regs(i2c);
-	rk_i2c_disable(i2c);
-
 	return err;
 }
 
@@ -387,6 +376,11 @@ static int rockchip_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 		struct i2c_msg *msg = &msgs[i];
 
 		dev_dbg(dev, "i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+
+		ret = rk_i2c_send_start_bit(i2c);
+		if (ret)
+			break;
+
 		if (msg->flags & I2C_M_RD) {
 			ret = rk_i2c_read(i2c, msg->addr, 0, 0, msg->buf,
 					  msg->len);
@@ -394,6 +388,9 @@ static int rockchip_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 			ret = rk_i2c_write(i2c, msg->addr, 0, 0, msg->buf,
 					   msg->len);
 		}
+
+		rk_i2c_send_stop_bit(i2c);
+
 		if (ret) {
 			dev_dbg(dev, "i2c_write: error sending: %pe\n",
 				ERR_PTR(ret));
@@ -402,9 +399,7 @@ static int rockchip_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
 		}
 	}
 
-	rk_i2c_send_stop_bit(i2c);
 	rk_i2c_disable(i2c);
-
 	return ret < 0 ? ret : nmsgs;
 }
 

-- 
2.37.2




  reply	other threads:[~2023-09-08 10:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-08 10:16 [PATCH 0/4] Fix rockchip I2C bus Gerald Loacker
2023-09-08 10:16 ` Gerald Loacker [this message]
2023-09-08 13:53   ` [PATCH 1/4] i2c: rockchip: fix i2c stop condition Sascha Hauer
2023-09-12  5:45     ` Gerald Loacker
2023-09-12  6:03       ` Sascha Hauer
2023-09-08 10:16 ` [PATCH 2/4] i2c: rockchip: ignore i2c transfers when another transfer is running Gerald Loacker
2023-09-08 11:51   ` Sascha Hauer
2023-09-08 11:55     ` Sascha Hauer
2023-09-08 13:13       ` Sascha Hauer
2023-09-11 11:46         ` Gerald Loacker
2023-09-08 10:16 ` [PATCH 3/4] net: ksz9477: propagate phy read error Gerald Loacker
2023-09-08 11:59   ` Ahmad Fatoum
2023-09-08 12:32     ` Oleksij Rempel
2023-09-08 10:16 ` [PATCH 4/4] net: ksz9477: propagate phy write error Gerald Loacker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230908-bugfix-i2c-rockchip-v1-1-f8235d811f6b@wolfvision.net \
    --to=gerald.loacker@wolfvision.net \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox