mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: phycore-stm32mp15: Use upstream dts
@ 2023-09-20 11:29 Sascha Hauer
  2023-09-20 11:44 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Sascha Hauer @ 2023-09-20 11:29 UTC (permalink / raw)
  To: Barebox List

The phycore-stm32mp15 board has long been mainlined. Switch the
board to use the upstream dts files.

This at least has the effect that now the PMIC is probed as our
downstream dts hasn't enabled the i2c4 node.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../dts/stm32mp157c-phycore-stm32mp1-3.dts    |  16 +-
 ...stm32mp157c-phycore-stm32mp15-pinctrl.dtsi |  92 ------
 .../stm32mp157c-phycore-stm32mp15-som.dtsi    | 271 ------------------
 3 files changed, 2 insertions(+), 377 deletions(-)
 delete mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
 delete mode 100644 arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi

diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
index a34a2a337f..02540b560e 100644
--- a/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
+++ b/arch/arm/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -6,12 +6,8 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <arm/st/stm32mp157.dtsi>
-#include <arm/st/stm32mp15xc.dtsi>
-#include <arm/st/stm32mp15-pinctrl.dtsi>
-#include <arm/st/stm32mp15xxac-pinctrl.dtsi>
-#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+#include <arm/st/stm32mp157c-phycore-stm32mp1-3.dts>
+#include "stm32mp151.dtsi"
 
 / {
 	model = "PHYTEC phyCORE-STM32MP1-3 SoM";
@@ -31,11 +27,3 @@ environment-emmc {
 		};
 	};
 };
-
-&sdmmc1 {
-        status = "okay";
-};
-
-&sdmmc2 {
-        status = "okay";
-};
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
deleted file mode 100644
index aa41006c23..0000000000
--- a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-pinctrl.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
-/*
- * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
- * Author: Dom VOVARD <dom.vovard@linrt.com>.
- */
-#include <arm/st/stm32mp15-pinctrl.dtsi>
-
-&ethernet0_rgmii_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('G', 4, AF11)>,	/* ETH_RGMII_GTX_CLK */
-			 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-			 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-			 <STM32_PINMUX('C', 2, AF11)>,	/* ETH_RGMII_TXD2 */
-			 <STM32_PINMUX('E', 2, AF11)>,	/* ETH_RGMII_TXD3 */
-			 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-			 <STM32_PINMUX('A', 2, AF11)>,	/* ETH_MDIO */
-			 <STM32_PINMUX('C', 1, AF11)>;	/* ETH_MDC */
-		bias-disable;
-		drive-push-pull;
-		slew-rate = <2>;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-			 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-			 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
-			 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
-			 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-			 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-		bias-disable;
-	};
-};
-
-&pinctrl {
-	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('E', 12, AF8)>, /* SDMMC1_D0DIR */
-				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
-				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-			slew-rate = <3>;
-			drive-push-pull;
-			bias-pull-up;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-			bias-pull-up;
-		};
-	};
-};
-
-&sdmmc1_b4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-			 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-			 <STM32_PINMUX('E', 6, AF8)>, /* SDMMC1_D2 */
-			 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-			 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-		slew-rate = <1>;
-		drive-push-pull;
-		bias-disable;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-		slew-rate = <2>;
-		drive-push-pull;
-		bias-disable;
-	};
-};
-
-&sdmmc2_d47_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
-		slew-rate = <1>;
-		drive-push-pull;
-		bias-pull-up;
-	};
-};
-
-&uart4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
-		bias-disable;
-		drive-push-pull;
-		slew-rate = <0>;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-disable;
-	};
-};
diff --git a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
deleted file mode 100644
index a40e59ae2e..0000000000
--- a/arch/arm/dts/stm32mp157c-phycore-stm32mp15-som.dtsi
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
-/*
- * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
- * Author: Dom VOVARD <dom.vovard@linrt.com>.
- */
-
-#include "stm32mp157c-phycore-stm32mp15-pinctrl.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-#include "stm32mp151.dtsi"
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-	};
-
-	vin: vin {
-		compatible = "regulator-fixed";
-		regulator-name = "vin";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	pwr_irq: pwr@50001020 {
-		compatible = "st,stm32mp1-pwr";
-		reg = <0x50001020 0x100>;
-	};
-};
-
-&bsec {
-	board_id: board_id@ec {
-		reg = <0xec 0x4>;
-		st,non-secure-otp;
-	};
-};
-
-&clk_hse {
-	st,digbypass;
-};
-
-&cpu0 {
-	cpu-supply = <&vddcore>;
-};
-
-&cpu1 {
-	cpu-supply = <&vddcore>;
-};
-
-&ethernet0 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	max-speed = <1000>;
-	st,eth-clk-sel;
-	status = "okay";
-
-	mdio0 {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-			buck1-supply = <&vin>;
-			buck2-supply = <&vin>;
-			buck3-supply = <&vin>;
-			buck4-supply = <&vin>;
-			ldo1-supply = <&v3v3>;
-			ldo2-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo4-supply = <&vin>;
-			ldo5-supply = <&v3v3>;
-			ldo6-supply = <&v3v3>;
-			vref_ddr-supply = <&vin>;
-			boost-supply = <&vin>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdd_eth_2v5: ldo2 {
-				regulator-name = "vdd_eth_2v5";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-boot-on;
-			};
-
-			vdd_eth_1v0: ldo6 {
-				regulator-name = "vdd_eth_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			bst_out: boost {
-				regulator-name = "bst_out";
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				regulator-active-discharge = <1>;
-			};
-		};
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	disable-wp;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "disabled";
-};
-
-&sdmmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	st,neg-edge;
-	bus-width = <8>;
-	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
-	mmc-ddr-3_3v;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&usart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins_a>;
-	status = "disabled";
-};
-
-&usbotg_hs {
-	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
-	usb-role-switch;
-	status = "okay";
-};
-
-&usbphyc {
-	status = "okay";
-};
-
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&vdd_usb>;
-};
-- 
2.39.2




^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-09-20 11:45 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-09-20 11:29 [PATCH] ARM: dts: phycore-stm32mp15: Use upstream dts Sascha Hauer
2023-09-20 11:44 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox