mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v1 4/7] arm: dts: imx8mp-skov: Simplify SD partition definition to 1 cell
Date: Fri, 29 Sep 2023 06:38:15 +0200	[thread overview]
Message-ID: <20230929043815.GA2825985@pengutronix.de> (raw)
In-Reply-To: <b2771224-215c-8fef-ae10-0abb25292e0e@pengutronix.de>

Hello Ahmad,

On Thu, Sep 28, 2023 at 10:13:44PM +0200, Ahmad Fatoum wrote:
> Hello Oleksij,
> 
> On 28.09.23 12:58, Oleksij Rempel wrote:
> > Update the partition definitions for SD card in imx8mp-skov to use
> > single cell for address and size, streamlining the format.
> 
> Is your eMMC really smaller than 4G? If it's >= 4G, barebox will fix it up in
> the kernel DT as 2/2 cells, so keeping it 2/2 in barebox removes some noise
> in of_diff - + output.

Ok, i see. Thx for the tip.
It is SD card, not eMMC. So, most probably it will be >= 4G.

I just realized, that SD card can be used as simple storage, not only as
the boot source. So, it is probably better to remove partition table from the
devicetree for SD too?

> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  arch/arm/dts/imx8mp-skov.dts | 10 +++++-----
> >  1 file changed, 5 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/dts/imx8mp-skov.dts b/arch/arm/dts/imx8mp-skov.dts
> > index 1d4738dbd7..b94b9dd51d 100644
> > --- a/arch/arm/dts/imx8mp-skov.dts
> > +++ b/arch/arm/dts/imx8mp-skov.dts
> > @@ -88,17 +88,17 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> >  &usdhc2 {
> >  	partitions {
> >  		compatible = "fixed-partitions";
> > -		#address-cells = <2>;
> > -		#size-cells = <2>;
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> >  
> >  		partition@0 {
> >  			label = "barebox";
> > -			reg = <0x0 0x0 0x0 0x100000>;
> > +			reg = <0x0 0x100000>;
> >  		};
> >  
> > -		env_sd: partition@e0000 {
> > +		env_sd: partition@100000 {
> >  			label = "barebox-environment";
> > -			reg = <0x0 0x100000 0x0 0x100000>;
> > +			reg = <0x100000 0x100000>;
> >  		};
> >  	};
> >  };

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



  reply	other threads:[~2023-09-29  4:40 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-28 10:58 [PATCH v1 1/7] arm: dts: imx8mp-skov: Add reserved-memory for ramoops pstore Oleksij Rempel
2023-09-28 10:58 ` [PATCH v1 2/7] arm: dts: imx8mp-skov: Add pins for hardware variant detection Oleksij Rempel
2023-09-28 10:58 ` [PATCH v1 3/7] arm: dts: imx8mp-skov: Switch to GPT for eMMC partitioning Oleksij Rempel
2023-09-28 10:58 ` [PATCH v1 4/7] arm: dts: imx8mp-skov: Simplify SD partition definition to 1 cell Oleksij Rempel
2023-09-28 20:13   ` Ahmad Fatoum
2023-09-29  4:38     ` Oleksij Rempel [this message]
2023-09-28 10:58 ` [PATCH v1 5/7] arm: dts: imx8mp-skov: Add barebox state backend in DTS Oleksij Rempel
2023-09-28 10:58 ` [PATCH v1 6/7] ARM: i.MX8MP: skov: refactor bootsource and BBU handlers Oleksij Rempel
2023-09-28 10:58 ` [PATCH v1 7/7] ARM: i.MX8MP: skov: Add hardware variant support Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230929043815.GA2825985@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox