From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 24/25] ARM: Update imx_v8_defconfig
Date: Fri, 10 Nov 2023 13:57:59 +0100 [thread overview]
Message-ID: <20231110125800.1901232-25-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20231110125800.1901232-1-s.hauer@pengutronix.de>
Enable i.MX9 support and drivers useful on that SoC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/imx_v8_defconfig | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/imx_v8_defconfig b/arch/arm/configs/imx_v8_defconfig
index 8084e72ea0..731156e4fe 100644
--- a/arch/arm/configs/imx_v8_defconfig
+++ b/arch/arm/configs/imx_v8_defconfig
@@ -1,5 +1,6 @@
CONFIG_ARCH_IMX=y
CONFIG_MACH_INNOCOMM_WB15=y
+CONFIG_MACH_MNT_REFORM=y
CONFIG_MACH_NXP_IMX8MM_EVK=y
CONFIG_MACH_NXP_IMX8MN_EVK=y
CONFIG_MACH_NXP_IMX8MP_EVK=y
@@ -12,6 +13,7 @@ CONFIG_MACH_TQ_MBA8MPXL=y
CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP=y
CONFIG_MACH_ZII_IMX8MQ_DEV=y
CONFIG_64BIT=y
+CONFIG_MACH_TQ_MBA9XXXCA=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_MMU=y
CONFIG_MALLOC_SIZE=0x0
@@ -93,6 +95,7 @@ CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
+CONFIG_DRIVER_SERIAL_LPUART32=y
CONFIG_DRIVER_NET_FEC_IMX=y
CONFIG_DP83867_PHY=y
CONFIG_MICREL_PHY=y
@@ -108,6 +111,7 @@ CONFIG_DRIVER_SPI_IMX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_I2C=y
CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
CONFIG_MTD=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_M25P80=y
@@ -122,6 +126,7 @@ CONFIG_MCI=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
CONFIG_MCI_IMX_ESDHC=y
CONFIG_RAVE_SP_CORE=y
+CONFIG_MFD_PCA9450=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
@@ -129,10 +134,11 @@ CONFIG_LED_TRIGGERS=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_AT24=y
CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_POLLER=y
CONFIG_WATCHDOG_IMX=y
+CONFIG_WATCHDOG_IMXULP=y
CONFIG_RAVE_SP_WATCHDOG=y
CONFIG_GPIO_PCA953X=y
-CONFIG_IMX_OCOTP=y
CONFIG_RAVE_SP_EEPROM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED=y
@@ -145,7 +151,6 @@ CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
-CONFIG_FS_FAT_LFN=y
CONFIG_FS_RATP=y
CONFIG_ZLIB=y
# CONFIG_MISSING_FIRMWARE_ERROR is not set
--
2.39.2
next prev parent reply other threads:[~2023-11-10 12:59 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-10 12:57 [PATCH 00/25] Add i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 01/25] ARM: initial i.MX9 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 02/25] ARM: i.MX: Add i.MX93 s4mu support Sascha Hauer
2023-11-13 7:25 ` Ahmad Fatoum
2023-11-10 12:57 ` [PATCH 03/25] ARM: i.MX: Add i.MX93 trdc support Sascha Hauer
2023-11-13 7:24 ` Ahmad Fatoum
2023-11-13 8:11 ` Sascha Hauer
2023-11-10 12:57 ` [PATCH 04/25] scripts: Add imx9image tool Sascha Hauer
2023-11-10 12:57 ` [PATCH 05/25] scripts: imx9image: Add PBL size option Sascha Hauer
2023-11-10 12:57 ` [PATCH 06/25] clk: Add i.MX93 clock support Sascha Hauer
2023-11-10 12:57 ` [PATCH 07/25] clk: imx: clk-fracn-gppll: make usable from PBL Sascha Hauer
2023-11-10 12:57 ` [PATCH 08/25] gpio-vf610: Add i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 09/25] iomux: " Sascha Hauer
2023-11-10 12:57 ` [PATCH 10/25] watchdog: Add ULP wdog support Sascha Hauer
2023-11-10 12:57 ` [PATCH 11/25] I2c: Add i2c_8bit_addr_from_msg() Sascha Hauer
2023-11-10 12:57 ` [PATCH 12/25] i2c: Add lpi2c support Sascha Hauer
2023-11-10 12:57 ` [PATCH 13/25] ARM: Add imx93.dtsi for USB Sascha Hauer
2023-11-10 12:57 ` [PATCH 14/25] serial: Add lpuart32 driver Sascha Hauer
2023-11-10 12:57 ` [PATCH 15/25] ARM: i.MX: add i.MX9 debug_ll support Sascha Hauer
2023-11-10 12:57 ` [PATCH 16/25] ARM: Add TQ MBA9XXXCA board support Sascha Hauer
2023-11-10 12:57 ` [PATCH 17/25] ARM: i.MX93: Add DDR size read support Sascha Hauer
2023-11-10 12:57 ` [PATCH 18/25] ARM: i.MX: romapi: rename functions to *romapi* Sascha Hauer
2023-11-10 12:57 ` [PATCH 19/25] ARM: i.MX: romapi: Implement i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 20/25] ARM: i.MX: atf: add imx93_load_and_start_image_via_tfa() Sascha Hauer
2023-11-10 12:57 ` [PATCH 21/25] imx-usb-loader: Add i.MX9 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 22/25] spi: spi-nxp-fspi: Enable for i.MX9 Sascha Hauer
2023-11-10 12:57 ` [PATCH 23/25] usb: i.MX chipidea: Enable usbmisc driver " Sascha Hauer
2023-11-10 12:57 ` Sascha Hauer [this message]
2023-11-10 12:58 ` [PATCH 25/25] ARM: multi_v8_defconfig: enable i.MX9 boards Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231110125800.1901232-25-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox