From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 02/25] ARM: i.MX: Add i.MX93 s4mu support
Date: Fri, 10 Nov 2023 13:57:37 +0100 [thread overview]
Message-ID: <20231110125800.1901232-3-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20231110125800.1901232-1-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/imx93-s4mu.c | 97 ++++++++++++++++++++++++++
include/soc/imx9/mu_hal.h | 12 ++++
include/soc/imx9/s400_api.h | 124 +++++++++++++++++++++++++++++++++
4 files changed, 234 insertions(+)
create mode 100644 arch/arm/mach-imx/imx93-s4mu.c
create mode 100644 include/soc/imx9/mu_hal.h
create mode 100644 include/soc/imx9/s400_api.h
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 7b093ba7fd..4efac08ee8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_RESET_IMX_SRC) += src.o
lwl-y += cpu_init.o
pbl-y += xload-spi.o xload-common.o xload-imx-nand.o xload-gpmi-nand.o
pbl-y += xload-qspi.o
+pbl-$(CONFIG_ARCH_IMX93) += imx93-s4mu.o
diff --git a/arch/arm/mach-imx/imx93-s4mu.c b/arch/arm/mach-imx/imx93-s4mu.c
new file mode 100644
index 0000000000..11a787d44d
--- /dev/null
+++ b/arch/arm/mach-imx/imx93-s4mu.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020-2022 NXP
+ */
+#define pr_fmt(fmt) "s4mu: " fmt
+
+#include <common.h>
+#include <io.h>
+#include <soc/imx9/s400_api.h>
+#include <soc/imx9/mu_hal.h>
+#include <linux/iopoll.h>
+
+#define MU_SR_TE0_MASK BIT(0)
+#define MU_SR_RF0_MASK BIT(0)
+#define MU_TR_COUNT 8
+#define MU_RR_COUNT 4
+
+struct mu_type {
+ u32 ver;
+ u32 par;
+ u32 cr;
+ u32 sr;
+ u32 reserved0[60];
+ u32 fcr;
+ u32 fsr;
+ u32 reserved1[2];
+ u32 gier;
+ u32 gcr;
+ u32 gsr;
+ u32 reserved2;
+ u32 tcr;
+ u32 tsr;
+ u32 rcr;
+ u32 rsr;
+ u32 reserved3[52];
+ u32 tr[16];
+ u32 reserved4[16];
+ u32 rr[16];
+ u32 reserved5[14];
+ u32 mu_attr;
+};
+
+void mu_hal_init(ulong base)
+{
+ struct mu_type *mu_base = (struct mu_type *)base;
+
+ writel(0, &mu_base->tcr);
+ writel(0, &mu_base->rcr);
+}
+
+int mu_hal_sendmsg(ulong base, u32 reg_index, u32 msg)
+{
+ struct mu_type *mu_base = (struct mu_type *)base;
+ u32 mask = MU_SR_TE0_MASK << reg_index;
+ u32 val;
+ int ret;
+
+ BUG_ON(reg_index >= MU_TR_COUNT);
+
+ pr_vdebug("sendmsg tsr 0x%x\n", readl(&mu_base->tsr));
+
+ /* Wait TX register to be empty. */
+ ret = readl_poll_timeout(&mu_base->tsr, val, val & mask, 10000);
+ if (ret < 0) {
+ pr_debug("%s timeout\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ pr_vdebug("tr[%d] 0x%x\n", reg_index, msg);
+
+ writel(msg, &mu_base->tr[reg_index]);
+
+ return 0;
+}
+
+int mu_hal_receivemsg(ulong base, u32 reg_index, u32 *msg)
+{
+ struct mu_type *mu_base = (struct mu_type *)base;
+ u32 mask = MU_SR_RF0_MASK << reg_index;
+ u32 val;
+ int ret;
+
+ BUG_ON(reg_index >= MU_RR_COUNT);
+
+ pr_vdebug("receivemsg rsr 0x%x\n", readl(&mu_base->rsr));
+
+ /* Wait RX register to be full. */
+ ret = readl_poll_timeout(&mu_base->rsr, val, val & mask, 10000000);
+ if (ret < 0)
+ return -ETIMEDOUT;
+
+ *msg = readl(&mu_base->rr[reg_index]);
+
+ pr_vdebug("rr[%d] 0x%x\n", reg_index, *msg);
+
+ return 0;
+}
diff --git a/include/soc/imx9/mu_hal.h b/include/soc/imx9/mu_hal.h
new file mode 100644
index 0000000000..5db559c1ac
--- /dev/null
+++ b/include/soc/imx9/mu_hal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __SNT_MU_HAL_H__
+#define __SNT_MU_HAL_H__
+
+void mu_hal_init(ulong base);
+int mu_hal_sendmsg(ulong base, u32 reg_index, u32 msg);
+int mu_hal_receivemsg(ulong base, u32 reg_index, u32 *msg);
+#endif
diff --git a/include/soc/imx9/s400_api.h b/include/soc/imx9/s400_api.h
new file mode 100644
index 0000000000..6d2dd71d67
--- /dev/null
+++ b/include/soc/imx9/s400_api.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __S400_API_H__
+#define __S400_API_H__
+
+#define AHAB_VERSION 0x6
+#define AHAB_CMD_TAG 0x17
+#define AHAB_RESP_TAG 0xe1
+
+/* ELE commands */
+#define ELE_PING_REQ (0x01)
+#define ELE_FW_AUTH_REQ (0x02)
+#define ELE_RESTART_RST_TIMER_REQ (0x04)
+#define ELE_DUMP_DEBUG_BUFFER_REQ (0x21)
+#define ELE_OEM_CNTN_AUTH_REQ (0x87)
+#define ELE_VERIFY_IMAGE_REQ (0x88)
+#define ELE_RELEASE_CONTAINER_REQ (0x89)
+#define ELE_WRITE_SECURE_FUSE_REQ (0x91)
+#define ELE_FWD_LIFECYCLE_UP_REQ (0x95)
+#define ELE_READ_FUSE_REQ (0x97)
+#define ELE_GET_FW_VERSION_REQ (0x9D)
+#define ELE_RET_LIFECYCLE_UP_REQ (0xA0)
+#define ELE_GET_EVENTS_REQ (0xA2)
+#define ELE_START_RNG (0xA3)
+#define ELE_GENERATE_DEK_BLOB (0xAF)
+#define ELE_ENABLE_PATCH_REQ (0xC3)
+#define ELE_RELEASE_RDC_REQ (0xC4)
+#define ELE_GET_FW_STATUS_REQ (0xC5)
+#define ELE_ENABLE_OTFAD_REQ (0xC6)
+#define ELE_RESET_REQ (0xC7)
+#define ELE_UPDATE_OTP_CLKDIV_REQ (0xD0)
+#define ELE_POWER_DOWN_REQ (0xD1)
+#define ELE_ENABLE_APC_REQ (0xD2)
+#define ELE_ENABLE_RTC_REQ (0xD3)
+#define ELE_DEEP_POWER_DOWN_REQ (0xD4)
+#define ELE_STOP_RST_TIMER_REQ (0xD5)
+#define ELE_WRITE_FUSE_REQ (0xD6)
+#define ELE_RELEASE_CAAM_REQ (0xD7)
+#define ELE_RESET_A35_CTX_REQ (0xD8)
+#define ELE_MOVE_TO_UNSECURED_REQ (0xD9)
+#define ELE_GET_INFO_REQ (0xDA)
+#define ELE_ATTEST_REQ (0xDB)
+#define ELE_RELEASE_PATCH_REQ (0xDC)
+#define ELE_OTP_SEQ_SWITH_REQ (0xDD)
+
+/* ELE failure indications */
+#define ELE_ROM_PING_FAILURE_IND (0x0A)
+#define ELE_FW_PING_FAILURE_IND (0x1A)
+#define ELE_BAD_SIGNATURE_FAILURE_IND (0xF0)
+#define ELE_BAD_HASH_FAILURE_IND (0xF1)
+#define ELE_INVALID_LIFECYCLE_IND (0xF2)
+#define ELE_PERMISSION_DENIED_FAILURE_IND (0xF3)
+#define ELE_INVALID_MESSAGE_FAILURE_IND (0xF4)
+#define ELE_BAD_VALUE_FAILURE_IND (0xF5)
+#define ELE_BAD_FUSE_ID_FAILURE_IND (0xF6)
+#define ELE_BAD_CONTAINER_FAILURE_IND (0xF7)
+#define ELE_BAD_VERSION_FAILURE_IND (0xF8)
+#define ELE_INVALID_KEY_FAILURE_IND (0xF9)
+#define ELE_BAD_KEY_HASH_FAILURE_IND (0xFA)
+#define ELE_NO_VALID_CONTAINER_FAILURE_IND (0xFB)
+#define ELE_BAD_CERTIFICATE_FAILURE_IND (0xFC)
+#define ELE_BAD_UID_FAILURE_IND (0xFD)
+#define ELE_BAD_MONOTONIC_COUNTER_FAILURE_IND (0xFE)
+#define ELE_MUST_SIGNED_FAILURE_IND (0xE0)
+#define ELE_NO_AUTHENTICATION_FAILURE_IND (0xEE)
+#define ELE_BAD_SRK_SET_FAILURE_IND (0xEF)
+#define ELE_UNALIGNED_PAYLOAD_FAILURE_IND (0xA6)
+#define ELE_WRONG_SIZE_FAILURE_IND (0xA7)
+#define ELE_ENCRYPTION_FAILURE_IND (0xA8)
+#define ELE_DECRYPTION_FAILURE_IND (0xA9)
+#define ELE_OTP_PROGFAIL_FAILURE_IND (0xAA)
+#define ELE_OTP_LOCKED_FAILURE_IND (0xAB)
+#define ELE_OTP_INVALID_IDX_FAILURE_IND (0xAD)
+#define ELE_TIME_OUT_FAILURE_IND (0xB0)
+#define ELE_BAD_PAYLOAD_FAILURE_IND (0xB1)
+#define ELE_WRONG_ADDRESS_FAILURE_IND (0xB4)
+#define ELE_DMA_FAILURE_IND (0xB5)
+#define ELE_DISABLED_FEATURE_FAILURE_IND (0xB6)
+#define ELE_MUST_ATTEST_FAILURE_IND (0xB7)
+#define ELE_RNG_NOT_STARTED_FAILURE_IND (0xB8)
+#define ELE_CRC_ERROR_IND (0xB9)
+#define ELE_AUTH_SKIPPED_OR_FAILED_FAILURE_IND (0xBB)
+#define ELE_INCONSISTENT_PAR_FAILURE_IND (0xBC)
+#define ELE_RNG_INST_FAILURE_FAILURE_IND (0xBD)
+#define ELE_LOCKED_REG_FAILURE_IND (0xBE)
+#define ELE_BAD_ID_FAILURE_IND (0xBF)
+#define ELE_INVALID_OPERATION_FAILURE_IND (0xC0)
+#define ELE_NON_SECURE_STATE_FAILURE_IND (0xC1)
+#define ELE_MSG_TRUNCATED_IND (0xC2)
+#define ELE_BAD_IMAGE_NUM_FAILURE_IND (0xC3)
+#define ELE_BAD_IMAGE_ADDR_FAILURE_IND (0xC4)
+#define ELE_BAD_IMAGE_PARAM_FAILURE_IND (0xC5)
+#define ELE_BAD_IMAGE_TYPE_FAILURE_IND (0xC6)
+#define ELE_CORRUPTED_SRK_FAILURE_IND (0xD0)
+#define ELE_OUT_OF_MEMORY_IND (0xD1)
+#define ELE_CSTM_FAILURE_IND (0xCF)
+#define ELE_OLD_VERSION_FAILURE_IND (0xCE)
+#define ELE_WRONG_BOOT_MODE_FAILURE_IND (0xCD)
+#define ELE_APC_ALREADY_ENABLED_FAILURE_IND (0xCB)
+#define ELE_RTC_ALREADY_ENABLED_FAILURE_IND (0xCC)
+#define ELE_ABORT_IND (0xFF)
+
+/* ELE IPC identifier */
+#define ELE_IPC_MU_RTD (0x1)
+#define ELE_IPC_MU_APD (0x2)
+
+/* ELE Status*/
+#define ELE_SUCCESS_IND (0xD6)
+#define ELE_FAILURE_IND (0x29)
+
+#define S400_MAX_MSG 255U
+
+struct sentinel_msg {
+ u8 version;
+ u8 size;
+ u8 command;
+ u8 tag;
+ u32 data[(S400_MAX_MSG - 1U)];
+};
+
+#endif
--
2.39.2
next prev parent reply other threads:[~2023-11-10 12:59 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-10 12:57 [PATCH 00/25] Add i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 01/25] ARM: initial i.MX9 support Sascha Hauer
2023-11-10 12:57 ` Sascha Hauer [this message]
2023-11-13 7:25 ` [PATCH 02/25] ARM: i.MX: Add i.MX93 s4mu support Ahmad Fatoum
2023-11-10 12:57 ` [PATCH 03/25] ARM: i.MX: Add i.MX93 trdc support Sascha Hauer
2023-11-13 7:24 ` Ahmad Fatoum
2023-11-13 8:11 ` Sascha Hauer
2023-11-10 12:57 ` [PATCH 04/25] scripts: Add imx9image tool Sascha Hauer
2023-11-10 12:57 ` [PATCH 05/25] scripts: imx9image: Add PBL size option Sascha Hauer
2023-11-10 12:57 ` [PATCH 06/25] clk: Add i.MX93 clock support Sascha Hauer
2023-11-10 12:57 ` [PATCH 07/25] clk: imx: clk-fracn-gppll: make usable from PBL Sascha Hauer
2023-11-10 12:57 ` [PATCH 08/25] gpio-vf610: Add i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 09/25] iomux: " Sascha Hauer
2023-11-10 12:57 ` [PATCH 10/25] watchdog: Add ULP wdog support Sascha Hauer
2023-11-10 12:57 ` [PATCH 11/25] I2c: Add i2c_8bit_addr_from_msg() Sascha Hauer
2023-11-10 12:57 ` [PATCH 12/25] i2c: Add lpi2c support Sascha Hauer
2023-11-10 12:57 ` [PATCH 13/25] ARM: Add imx93.dtsi for USB Sascha Hauer
2023-11-10 12:57 ` [PATCH 14/25] serial: Add lpuart32 driver Sascha Hauer
2023-11-10 12:57 ` [PATCH 15/25] ARM: i.MX: add i.MX9 debug_ll support Sascha Hauer
2023-11-10 12:57 ` [PATCH 16/25] ARM: Add TQ MBA9XXXCA board support Sascha Hauer
2023-11-10 12:57 ` [PATCH 17/25] ARM: i.MX93: Add DDR size read support Sascha Hauer
2023-11-10 12:57 ` [PATCH 18/25] ARM: i.MX: romapi: rename functions to *romapi* Sascha Hauer
2023-11-10 12:57 ` [PATCH 19/25] ARM: i.MX: romapi: Implement i.MX93 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 20/25] ARM: i.MX: atf: add imx93_load_and_start_image_via_tfa() Sascha Hauer
2023-11-10 12:57 ` [PATCH 21/25] imx-usb-loader: Add i.MX9 support Sascha Hauer
2023-11-10 12:57 ` [PATCH 22/25] spi: spi-nxp-fspi: Enable for i.MX9 Sascha Hauer
2023-11-10 12:57 ` [PATCH 23/25] usb: i.MX chipidea: Enable usbmisc driver " Sascha Hauer
2023-11-10 12:57 ` [PATCH 24/25] ARM: Update imx_v8_defconfig Sascha Hauer
2023-11-10 12:58 ` [PATCH 25/25] ARM: multi_v8_defconfig: enable i.MX9 boards Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231110125800.1901232-3-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox