From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 05/13] clk: divider: implement divider_[ro_]round_rate_parent
Date: Mon, 27 Nov 2023 07:49:39 +0100 [thread overview]
Message-ID: <20231127064947.2207726-6-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20231127064947.2207726-1-a.fatoum@pengutronix.de>
These functions will be used in the incoming STM32MP13 clock driver
support.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/clk/clk-divider.c | 35 ++++++++++++++++++++++++++++++++++-
include/linux/clk-provider.h | 21 +++++++++++++++++++++
2 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 150b1fe60fd4..ccab70aecca2 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <io.h>
#include <malloc.h>
-#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/log2.h>
#include <linux/math64.h>
@@ -240,6 +240,39 @@ long divider_round_rate(struct clk *clk, unsigned long rate,
return DIV_ROUND_UP(*prate, div);
}
+long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
+ unsigned long rate, unsigned long *prate,
+ const struct clk_div_table *table,
+ u8 width, unsigned long flags)
+{
+ int div;
+
+ div = clk_divider_bestdiv(&hw->clk, rate, prate, table, width, flags);
+
+ return DIV_ROUND_UP_ULL((u64)*prate, div);
+}
+EXPORT_SYMBOL_GPL(divider_round_rate_parent);
+
+long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
+ unsigned long rate, unsigned long *prate,
+ const struct clk_div_table *table, u8 width,
+ unsigned long flags, unsigned int val)
+{
+ int div;
+
+ div = _get_div(table, val, flags, width);
+
+ /* Even a read-only clock can propagate a rate change */
+ if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
+ if (!*prate)
+ return -EINVAL;
+
+ *prate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * div);
+ }
+
+ return DIV_ROUND_UP_ULL((u64)*prate, div);
+}
+
static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 207f3b205dab..6d781fbfcc2e 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -8,6 +8,27 @@
#include <linux/clk.h>
+long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
+ unsigned long rate, unsigned long *prate,
+ const struct clk_div_table *table,
+ u8 width, unsigned long flags);
+
+long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
+ unsigned long rate, unsigned long *prate,
+ const struct clk_div_table *table, u8 width,
+ unsigned long flags, unsigned int val);
+
+static inline long divider_ro_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate,
+ const struct clk_div_table *table,
+ u8 width, unsigned long flags,
+ unsigned int val)
+{
+ return divider_ro_round_rate_parent(hw, clk_hw_get_parent(hw),
+ rate, prate, table, width, flags,
+ val);
+}
+
#define CLK_HW_INIT(_name, _parent, _ops, _flags) \
(&(struct clk_init_data) { \
.flags = _flags, \
--
2.39.2
next prev parent reply other threads:[~2023-11-27 6:51 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-27 6:49 [PATCH 00/13] ARM: stm32mp: add full STM32MP13 support with OP-TEE Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 01/13] clk: stm32mp1: build only when STM32MP15 support is enabled Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 02/13] clk: factor out clk_hw_get_parent_index Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 03/13] include: add initial <linux/clk-provider.h> Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 04/13] clk: divider: implement CLK_DIVIDER_ALLOW_ZERO Ahmad Fatoum
2023-11-27 6:49 ` Ahmad Fatoum [this message]
2023-11-27 6:49 ` [PATCH 06/13] clk: implement clk clk_hw_get_parent_by_index Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 07/13] clk: add struct clk_init_data::parent_hws Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 08/13] clk: implement clk_hw_reparent Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 09/13] clk: add STM32MP13 clock and reset drivers Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 10/13] pinctrl: stm32: match st,stm32mp135-pinctrl DT compatible Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 11/13] aiodev: stm32: add STM32MP13x support Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 12/13] ARM: stm32mp: 135-DK: enable environment, bbu handler and deep probe Ahmad Fatoum
2023-11-27 6:49 ` [PATCH 13/13] ARM: stm32mp: remove STM32MP13 .stm32 image Ahmad Fatoum
2023-12-05 7:35 ` [PATCH 00/13] ARM: stm32mp: add full STM32MP13 support with OP-TEE Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231127064947.2207726-6-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox