From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Wed, 03 Jan 2024 15:52:34 +0100 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1rL2bi-0026gf-1W for lore@lore.pengutronix.de; Wed, 03 Jan 2024 15:52:34 +0100 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rL2bg-0004gP-00 for lore@pengutronix.de; Wed, 03 Jan 2024 15:52:33 +0100 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To: Cc:Content-Type:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=DMbGFIzElSd0Uu2uLa6DBepisH3WOn8F3hGgjYhNbnQ=; b=L7smnku8VRaAWOct562gSgpmA7 WeJ8SaJ7R7Qm3KY95g6FVfEY2cFMo5gFVbNRP9yHXXO86qopfHQPydlrpynXU19IawU7oVXznnFP4 5gb7TAUUDFsB0LyssGQDTsuyd4T4n1ZOMXiWzdbAL/jF+FXX87ZViO2WFIxdsoGWFCJp2hrkDhtFs hRbAzwS+Jq8lCylW7WP8CPpwSFkGfpybZE18PRbYNP+bLUPF7d/R1dMGUcrR5Du8V+M96VufsPaHc ViPxLbOtjnpTgZqZAYswmIZar+fQcdGU/xpbnwnlwDRK5GWR0fbT0zPkRAUvXgADwPn8qpB7yG7lg RtKliPeQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1rL2aO-00BAxH-2c; Wed, 03 Jan 2024 14:51:12 +0000 Received: from metis.whiteo.stw.pengutronix.de ([2a0a:edc0:2:b01:1d::104]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1rL2aI-00BAva-2R for barebox@lists.infradead.org; Wed, 03 Jan 2024 14:51:10 +0000 Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1rL2aH-0004Hw-Ba; Wed, 03 Jan 2024 15:51:05 +0100 Received: from [2a0a:edc0:0:1101:1d::28] (helo=dude02.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1rL2aG-0008fe-VU; Wed, 03 Jan 2024 15:51:04 +0100 Received: from sha by dude02.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1rL2aG-00F3zw-2l; Wed, 03 Jan 2024 15:51:04 +0100 From: Sascha Hauer To: Barebox List Date: Wed, 3 Jan 2024 15:51:03 +0100 Message-Id: <20240103145103.3589208-2-s.hauer@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240103145103.3589208-1-s.hauer@pengutronix.de> References: <20240103145103.3589208-1-s.hauer@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20240103_065107_104125_4CA40B44 X-CRM114-Status: GOOD ( 31.51 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.whiteo.stw.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-6.2 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: [PATCH 2/2] net: Add fsl_enetc network driver support X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.whiteo.stw.pengutronix.de) This adds support for the fsl_enetc network controller found on several Layerscape SoCs. The code is originally from U-Boot-2023.10-rc1. Signed-off-by: Sascha Hauer --- drivers/net/Kconfig | 9 + drivers/net/Makefile | 1 + drivers/net/fsl_enetc.c | 602 +++++++++++++++++++++++++++++++++++ drivers/net/fsl_enetc.h | 249 +++++++++++++++ drivers/net/fsl_enetc_mdio.c | 130 ++++++++ 5 files changed, 991 insertions(+) create mode 100644 drivers/net/fsl_enetc.c create mode 100644 drivers/net/fsl_enetc.h create mode 100644 drivers/net/fsl_enetc_mdio.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e3571cbb20..430cc6a4e7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -188,6 +188,15 @@ config DRIVER_NET_FEC_IMX depends on HAS_DMA select PHYLIB +config DRIVER_NET_FSL_ENETC + bool "Freescale enetc ethernet driver" + select PHYLIB + depends on PCI + depends on HAS_DMA + help + This option enables support for the Freescale enetc core found + on Layerscape SoCs. + config DRIVER_NET_FSL_FMAN bool "Freescale fman ethernet driver" select PHYLIB diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 61dcf60cba..207345cfa3 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_DRIVER_NET_ENC28J60) += enc28j60.o obj-$(CONFIG_DRIVER_NET_EP93XX) += ep93xx.o obj-$(CONFIG_DRIVER_NET_ETHOC) += ethoc.o obj-$(CONFIG_DRIVER_NET_FEC_IMX) += fec_imx.o +obj-$(CONFIG_DRIVER_NET_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o obj-$(CONFIG_DRIVER_NET_FSL_FMAN) += fsl-fman.o obj-$(CONFIG_DRIVER_NET_GIANFAR) += gianfar.o obj-$(CONFIG_DRIVER_NET_KS8851_MLL) += ks8851_mll.o diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c new file mode 100644 index 0000000000..bcd6402079 --- /dev/null +++ b/drivers/net/fsl_enetc.c @@ -0,0 +1,602 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ENETC ethernet controller driver + * Copyright 2017-2021 NXP + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fsl_enetc.h" + +/* MDIO wrappers, we're using these to drive internal MDIO to get to serdes */ +static __maybe_unused int enetc_mdio_read(struct enetc_priv *priv, int addr, int devad, int reg) +{ + struct enetc_mdio_priv mdio_priv; + + mdio_priv.regs_base = priv->port_regs + ENETC_PM_IMDIO_BASE; + + return enetc_mdio_read_priv(&mdio_priv, addr, devad, reg); +} + +static int enetc_mdio_write(struct enetc_priv *priv, int addr, int devad, int reg, + u16 val) +{ + struct enetc_mdio_priv mdio_priv; + int ret; + + mdio_priv.regs_base = priv->port_regs + ENETC_PM_IMDIO_BASE; + + ret = enetc_mdio_write_priv(&mdio_priv, addr, devad, reg, val); + + return ret; +} + +/* only interfaces that can pin out through serdes have internal MDIO */ +static bool enetc_has_imdio(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + + return !!(enetc_read_port(priv, ENETC_PCAPR0) & ENETC_PCAPRO_MDIO); +} + +/* set up serdes for SGMII */ +static int enetc_init_sgmii(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + bool is2500 = false; + u16 reg; + + if (!enetc_has_imdio(edev)) + return 0; + + if (priv->uclass_id == PHY_INTERFACE_MODE_2500BASEX) + is2500 = true; + + /* + * Set to SGMII mode, for 1Gbps enable AN, for 2.5Gbps set fixed speed. + * Although fixed speed is 1Gbps, we could be running at 2.5Gbps based + * on PLL configuration. Setting 1G for 2.5G here is counter intuitive + * but intentional. + */ + reg = ENETC_PCS_IF_MODE_SGMII; + reg |= is2500 ? ENETC_PCS_IF_MODE_SPEED_1G : ENETC_PCS_IF_MODE_SGMII_AN; + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, + ENETC_PCS_IF_MODE, reg); + + /* Dev ability - SGMII */ + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, + ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SGMII); + + /* Adjust link timer for SGMII */ + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, + ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL); + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, + ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL); + + reg = ENETC_PCS_CR_DEF_VAL; + reg |= is2500 ? ENETC_PCS_CR_RST : ENETC_PCS_CR_RESET_AN; + /* restart PCS AN */ + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, MDIO_DEVAD_NONE, + ENETC_PCS_CR, reg); + + return 0; +} + +/* set up MAC for RGMII */ +static void enetc_init_rgmii(struct eth_device *edev, struct phy_device *phydev) +{ + struct enetc_priv *priv = edev->priv; + u32 old_val, val; + + old_val = val = enetc_read_port(priv, ENETC_PM_IF_MODE); + + /* disable unreliable RGMII in-band signaling and force the MAC into + * the speed negotiated by the PHY. + */ + val &= ~ENETC_PM_IF_MODE_AN_ENA; + + if (phydev->speed == SPEED_1000) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_1000; + } else if (phydev->speed == SPEED_100) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_100; + } else if (phydev->speed == SPEED_10) { + val &= ~ENETC_PM_IFM_SSP_MASK; + val |= ENETC_PM_IFM_SSP_10; + } + + if (phydev->duplex == DUPLEX_FULL) + val |= ENETC_PM_IFM_FULL_DPX; + else + val &= ~ENETC_PM_IFM_FULL_DPX; + + if (val == old_val) + return; + + enetc_write_port(priv, ENETC_PM_IF_MODE, val); +} + +/* set up MAC configuration for the given interface type */ +static void enetc_setup_mac_iface(struct eth_device *edev, + struct phy_device *phydev) +{ + struct enetc_priv *priv = edev->priv; + u32 if_mode; + + switch (priv->uclass_id) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + enetc_init_rgmii(edev, phydev); + break; + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_10GBASER: + /* set ifmode to (US)XGMII */ + if_mode = enetc_read_port(priv, ENETC_PM_IF_MODE); + if_mode &= ~ENETC_PM_IF_IFMODE_MASK; + enetc_write_port(priv, ENETC_PM_IF_MODE, if_mode); + break; + }; +} + +/* set up serdes for SXGMII */ +static int enetc_init_sxgmii(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + + if (!enetc_has_imdio(edev)) + return 0; + + /* Dev ability - SXGMII */ + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL, + ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII); + + /* Restart PCS AN */ + enetc_mdio_write(priv, ENETC_PCS_PHY_ADDR, ENETC_PCS_DEVAD_REPL, + ENETC_PCS_CR, + ENETC_PCS_CR_RST | ENETC_PCS_CR_RESET_AN); + + return 0; +} + +/* Apply protocol specific configuration to MAC, serdes as needed */ +static void enetc_start_pcs(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + + priv->uclass_id = of_get_phy_mode(priv->dev->of_node); + if (priv->uclass_id == PHY_INTERFACE_MODE_NA) { + dev_dbg(&edev->dev, + "phy-mode property not found, defaulting to SGMII\n"); + priv->uclass_id = PHY_INTERFACE_MODE_SGMII; + } + + switch (priv->uclass_id) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_2500BASEX: + enetc_init_sgmii(edev); + break; + case PHY_INTERFACE_MODE_USXGMII: + case PHY_INTERFACE_MODE_10GBASER: + enetc_init_sxgmii(edev); + break; + }; +} + +/* + * LS1028A is the only part with IERB at this time and there are plans to + * change its structure, keep this LS1028A specific for now. + */ +#define LS1028A_IERB_BASE 0x1f0800000ULL +#define LS1028A_IERB_PSIPMAR0(pf, vf) (LS1028A_IERB_BASE + 0x8000 \ + + (pf) * 0x100 + (vf) * 8) +#define LS1028A_IERB_PSIPMAR1(pf, vf) (LS1028A_IERB_PSIPMAR0(pf, vf) + 4) + +static int enetc_get_hwaddr(struct eth_device *edev, unsigned char *mac) +{ + return -EOPNOTSUPP; +} + +static int enetc_ls1028a_write_hwaddr(struct eth_device *edev, const unsigned char *mac) +{ + struct enetc_priv *priv = edev->priv; + struct pci_dev *pdev = to_pci_dev(priv->dev); + const int devfn_to_pf[] = {0, 1, 2, -1, -1, -1, 3}; + int devfn = PCI_FUNC(pdev->devfn); + u32 lower, upper; + int pf; + + if (devfn >= ARRAY_SIZE(devfn_to_pf)) + return 0; + + pf = devfn_to_pf[devfn]; + if (pf < 0) + return 0; + + lower = *(const u16 *)(mac + 4); + upper = *(const u32 *)mac; + + out_le32(LS1028A_IERB_PSIPMAR0(pf, 0), upper); + out_le32(LS1028A_IERB_PSIPMAR1(pf, 0), lower); + + return 0; +} + +static int enetc_write_hwaddr(struct eth_device *edev, const unsigned char *mac) +{ + struct enetc_priv *priv = edev->priv; + + u16 lower = *(const u16 *)(mac + 4); + u32 upper = *(const u32 *)mac; + + enetc_write_port(priv, ENETC_PSIPMAR0, upper); + enetc_write_port(priv, ENETC_PSIPMAR1, lower); + + return 0; +} + +/* Configure port parameters (# of rings, frame size, enable port) */ +static void enetc_enable_si_port(struct enetc_priv *priv) +{ + u32 val; + + /* set Rx/Tx BDR count */ + val = ENETC_PSICFGR_SET_TXBDR(ENETC_TX_BDR_CNT); + val |= ENETC_PSICFGR_SET_RXBDR(ENETC_RX_BDR_CNT); + enetc_write_port(priv, ENETC_PSICFGR(0), val); + /* set Rx max frame size */ + enetc_write_port(priv, ENETC_PM_MAXFRM, ENETC_RX_MAXFRM_SIZE); + /* enable MAC port */ + enetc_write_port(priv, ENETC_PM_CC, ENETC_PM_CC_RX_TX_EN); + /* enable port */ + enetc_write_port(priv, ENETC_PMR, ENETC_PMR_SI0_EN); + /* set SI cache policy */ + enetc_write(priv, ENETC_SICAR0, + ENETC_SICAR_RD_CFG | ENETC_SICAR_WR_CFG); + /* enable SI */ + enetc_write(priv, ENETC_SIMR, ENETC_SIMR_EN); +} + +/* returns DMA address for a given buffer index */ +static inline dma_addr_t enetc_rxb_address(struct enetc_priv *priv, int i) +{ + return priv->rx_pkg_phys[i]; +} + +/* + * Setup a single Tx BD Ring (ID = 0): + * - set Tx buffer descriptor address + * - set the BD count + * - initialize the producer and consumer index + */ +static void enetc_setup_tx_bdr(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + struct bd_ring *tx_bdr = &priv->tx_bdr; + u64 tx_bd_add = (u64)priv->enetc_txbd; + + /* used later to advance to the next Tx BD */ + tx_bdr->bd_count = ENETC_BD_CNT; + tx_bdr->next_prod_idx = 0; + tx_bdr->next_cons_idx = 0; + tx_bdr->cons_idx = priv->regs_base + + ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBCIR); + tx_bdr->prod_idx = priv->regs_base + + ENETC_BDR(TX, ENETC_TX_BDR_ID, ENETC_TBPIR); + + /* set Tx BD address */ + enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR0, + lower_32_bits(tx_bd_add)); + enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBBAR1, + upper_32_bits(tx_bd_add)); + /* set Tx 8 BD count */ + enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBLENR, + tx_bdr->bd_count); + + /* reset both producer/consumer indexes */ + enetc_write_reg(tx_bdr->cons_idx, tx_bdr->next_cons_idx); + enetc_write_reg(tx_bdr->prod_idx, tx_bdr->next_prod_idx); + + /* enable TX ring */ + enetc_bdr_write(priv, TX, ENETC_TX_BDR_ID, ENETC_TBMR, ENETC_TBMR_EN); +} + +/* + * Setup a single Rx BD Ring (ID = 0): + * - set Rx buffer descriptors address (one descriptor per buffer) + * - set buffer size as max frame size + * - enable Rx ring + * - reset consumer and producer indexes + * - set buffer for each descriptor + */ +static void enetc_setup_rx_bdr(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + struct bd_ring *rx_bdr = &priv->rx_bdr; + u64 rx_bd_add = (u64)priv->enetc_rxbd; + int i; + + /* used later to advance to the next BD produced by ENETC HW */ + rx_bdr->bd_count = ENETC_BD_CNT; + rx_bdr->next_prod_idx = 0; + rx_bdr->next_cons_idx = 0; + rx_bdr->cons_idx = priv->regs_base + + ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBCIR); + rx_bdr->prod_idx = priv->regs_base + + ENETC_BDR(RX, ENETC_RX_BDR_ID, ENETC_RBPIR); + + /* set Rx BD address */ + enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR0, + lower_32_bits(rx_bd_add)); + enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBAR1, + upper_32_bits(rx_bd_add)); + /* set Rx BD count (multiple of 8) */ + enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBLENR, + rx_bdr->bd_count); + /* set Rx buffer size */ + enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBBSR, PKTSIZE); + + /* fill Rx BD */ + memset(priv->enetc_rxbd, 0, + rx_bdr->bd_count * sizeof(union enetc_rx_bd)); + + for (i = 0; i < rx_bdr->bd_count; i++) { + priv->rx_pkg[i] = dma_alloc(PKTSIZE); + priv->rx_pkg_phys[i] = dma_map_single(priv->dev, priv->rx_pkg[i], + PKTSIZE, DMA_FROM_DEVICE); + priv->enetc_rxbd[i].w.addr = priv->rx_pkg_phys[i]; + } + + /* reset producer (ENETC owned) and consumer (SW owned) index */ + enetc_write_reg(rx_bdr->cons_idx, rx_bdr->next_cons_idx); + enetc_write_reg(rx_bdr->prod_idx, rx_bdr->next_prod_idx); + + /* enable Rx ring */ + enetc_bdr_write(priv, RX, ENETC_RX_BDR_ID, ENETC_RBMR, ENETC_RBMR_EN); +} + +/* + * Start ENETC interface: + * - perform FLR + * - enable access to port and SI registers + * - set mac address + * - setup TX/RX buffer descriptors + * - enable Tx/Rx rings + */ +static int enetc_start(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + struct pci_dev *pdev = to_pci_dev(priv->dev); + u32 t; + int ret, interface; + + /* reset and enable the PCI device */ + pci_flr(pdev); + + pci_read_config_dword(pdev, PCI_COMMAND, &t); + pci_write_config_dword(pdev, PCI_COMMAND, t | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + interface = of_get_phy_mode(priv->dev->of_node); + + ret = phy_device_connect(edev, NULL, 0, NULL, 0, interface); + if (ret) + return ret; + + enetc_enable_si_port(priv); + + /* setup Tx/Rx buffer descriptors */ + enetc_setup_tx_bdr(edev); + enetc_setup_rx_bdr(edev); + + enetc_setup_mac_iface(edev, priv->phy); + + return 0; +} + +/* + * Stop the network interface: + * - just quiesce it, we can wipe all configuration as _start starts from + * scratch each time + */ +static void enetc_stop(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + struct pci_dev *pdev = to_pci_dev(priv->dev); + u32 t; + + /* FLR is sufficient to quiesce the device */ + pci_flr(pdev); + + /* leave the BARs accessible after we stop, this is needed to use + * internal MDIO in command line. + */ + pci_read_config_dword(pdev, PCI_COMMAND, &t); + pci_write_config_dword(pdev, PCI_COMMAND, t | PCI_COMMAND_MEMORY); +} + +/* + * ENETC transmit packet: + * - check if Tx BD ring is full + * - set buffer/packet address (dma address) + * - set final fragment flag + * - try while producer index equals consumer index or timeout + */ +static int enetc_send(struct eth_device *edev, void *packet, int length) +{ + struct enetc_priv *priv = edev->priv; + struct bd_ring *txr = &priv->tx_bdr; + int ret; + u32 pi, ci; + dma_addr_t dma; + u64 start; + + pi = txr->next_prod_idx; + ci = enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK; + /* Tx ring is full when */ + if (((pi + 1) % txr->bd_count) == ci) { + dev_err(&edev->dev, "Tx BDR full\n"); + return -ETIMEDOUT; + } + + dev_vdbg(&edev->dev, "TxBD[%d]send: pkt_len=%d, buff @0x%x%08x\n", pi, length, + upper_32_bits((u64)packet), lower_32_bits((u64)packet)); + + dma = dma_map_single(priv->dev, packet, length, DMA_TO_DEVICE); + + /* prepare Tx BD */ + memset(&priv->enetc_txbd[pi], 0x0, sizeof(struct enetc_tx_bd)); + priv->enetc_txbd[pi].addr = cpu_to_le64(dma); + priv->enetc_txbd[pi].buf_len = cpu_to_le16(length); + priv->enetc_txbd[pi].frm_len = cpu_to_le16(length); + priv->enetc_txbd[pi].flags = cpu_to_le16(ENETC_TXBD_FLAGS_F); + + dmb(); + + /* send frame: increment producer index */ + pi = (pi + 1) % txr->bd_count; + txr->next_prod_idx = pi; + enetc_write_reg(txr->prod_idx, pi); + + start = get_time_ns(); + + while (1) { + if (is_timeout(start, 100 * USECOND)) { + ret = -ETIMEDOUT; + break; + } + + if (pi == (enetc_read_reg(txr->cons_idx) & ENETC_BDR_IDX_MASK)) { + ret = 0; + break; + } + } + + dma_unmap_single(priv->dev, dma, length, DMA_TO_DEVICE); + + return ret; +} + +/* + * Receive frame: + * - wait for the next BD to get ready bit set + * - clean up the descriptor + * - move on and indicate to HW that the cleaned BD is available for Rx + */ +static int enetc_recv(struct eth_device *edev) +{ + struct enetc_priv *priv = edev->priv; + struct bd_ring *rxr = &priv->rx_bdr; + int pi = rxr->next_prod_idx; + int ci = rxr->next_cons_idx; + u32 status; + void *pkg; + int len; + + status = le32_to_cpu(priv->enetc_rxbd[pi].r.lstatus); + + /* check if current BD is ready to be consumed */ + if (!ENETC_RXBD_STATUS_R(status)) + return 0; + + dmb(); + + len = le16_to_cpu(priv->enetc_rxbd[pi].r.buf_len); + + dev_dbg(&edev->dev, "RxBD[%d]: len=%d err=%d pkt=0x%p\n", pi, len, + ENETC_RXBD_STATUS_ERRORS(status), pkg); + + dma_sync_single_for_cpu(priv->dev, priv->rx_pkg_phys[pi], PKTSIZE, DMA_FROM_DEVICE); + net_receive(edev, priv->rx_pkg[pi], len); + dma_sync_single_for_device(priv->dev, priv->rx_pkg_phys[pi], PKTSIZE, DMA_FROM_DEVICE); + + /* BD clean up and advance to next in ring */ + memset(&priv->enetc_rxbd[pi], 0, sizeof(union enetc_rx_bd)); + priv->enetc_rxbd[pi].w.addr = priv->rx_pkg_phys[pi]; + rxr->next_prod_idx = (pi + 1) % rxr->bd_count; + ci = (ci + 1) % rxr->bd_count; + rxr->next_cons_idx = ci; + dmb(); + /* free up the slot in the ring for HW */ + enetc_write_reg(rxr->cons_idx, ci); + + return 0; +} + +static int enetc_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct device *dev = &pdev->dev; + struct enetc_priv *priv; + struct eth_device *edev; + int ret; + + pci_enable_device(pdev); + pci_set_master(pdev); + + priv = xzalloc(sizeof(*priv)); + priv->dev = dev; + + priv->enetc_txbd = dma_alloc_coherent(sizeof(struct enetc_tx_bd) * ENETC_BD_CNT, NULL); + priv->enetc_rxbd = dma_alloc_coherent(sizeof(union enetc_rx_bd) * ENETC_BD_CNT, NULL); + + if (!priv->enetc_txbd || !priv->enetc_rxbd) { + /* free should be able to handle NULL, just free all pointers */ + free(priv->enetc_txbd); + free(priv->enetc_rxbd); + + return -ENOMEM; + } + + /* initialize register */ + priv->regs_base = pci_iomap(pdev, 0); + if (!priv->regs_base) { + dev_err(dev, "failed to map BAR0\n"); + return -EINVAL; + } + + edev = &priv->edev; + dev->priv = priv; + edev->priv = priv; + edev->open = enetc_start; + edev->send = enetc_send; + edev->recv = enetc_recv; + edev->halt = enetc_stop; + edev->get_ethaddr = enetc_get_hwaddr; + + if (of_machine_is_compatible("fsl,ls1028a")) + edev->set_ethaddr = enetc_ls1028a_write_hwaddr; + else + edev->set_ethaddr = enetc_write_hwaddr; + + edev->parent = dev; + + priv->port_regs = priv->regs_base + ENETC_PORT_REGS_OFF; + + enetc_start_pcs(&priv->edev); + + ret = eth_register(edev); + if (ret) + return ret; + + return 0; +} + +static DEFINE_PCI_DEVICE_TABLE(enetc_pci_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_ENETC_ETH) }, + { }, +}; + +static struct pci_driver enetc_eth_driver = { + .name = "fsl_enetc", + .id_table = enetc_pci_tbl, + .probe = enetc_probe, +}; +device_pci_driver(enetc_eth_driver); diff --git a/drivers/net/fsl_enetc.h b/drivers/net/fsl_enetc.h new file mode 100644 index 0000000000..d79b0a337c --- /dev/null +++ b/drivers/net/fsl_enetc.h @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ENETC ethernet controller driver + * Copyright 2017-2021 NXP + */ + +#ifndef _ENETC_H +#define _ENETC_H + +#include + +/* PCI function IDs */ +#define PCI_DEVICE_ID_ENETC_ETH 0xE100 +#define PCI_DEVICE_ID_ENETC_MDIO 0xEE01 + +/* ENETC Ethernet controller registers */ +/* Station interface register offsets */ +#define ENETC_SIMR 0x000 +#define ENETC_SIMR_EN BIT(31) +#define ENETC_SICAR0 0x040 +/* write cache cfg: snoop, no allocate, data & BD coherent */ +#define ENETC_SICAR_WR_CFG 0x6767 +/* read cache cfg: coherent copy, look up, don't alloc in cache */ +#define ENETC_SICAR_RD_CFG 0x27270000 +#define ENETC_SIROCT 0x300 +#define ENETC_SIRFRM 0x308 +#define ENETC_SITOCT 0x320 +#define ENETC_SITFRM 0x328 + +/* Rx/Tx Buffer Descriptor Ring registers */ +enum enetc_bdr_type {TX, RX}; +#define ENETC_BDR(type, n, off) (0x8000 + (type) * 0x100 + (n) * 0x200 + (off)) +#define ENETC_BDR_IDX_MASK 0xffff + +/* Rx BDR reg offsets */ +#define ENETC_RBMR 0x00 +#define ENETC_RBMR_EN BIT(31) +#define ENETC_RBBSR 0x08 +/* initial consumer index for Rx BDR */ +#define ENETC_RBCIR 0x0c +#define ENETC_RBBAR0 0x10 +#define ENETC_RBBAR1 0x14 +#define ENETC_RBPIR 0x18 +#define ENETC_RBLENR 0x20 + +/* Tx BDR reg offsets */ +#define ENETC_TBMR 0x00 +#define ENETC_TBMR_EN BIT(31) +#define ENETC_TBBAR0 0x10 +#define ENETC_TBBAR1 0x14 +#define ENETC_TBPIR 0x18 +#define ENETC_TBCIR 0x1c +#define ENETC_TBLENR 0x20 + +/* Port registers offset */ +#define ENETC_PORT_REGS_OFF 0x10000 + +/* Port registers */ +#define ENETC_PMR 0x0000 +#define ENETC_PMR_SI0_EN BIT(16) +#define ENETC_PSIPMMR 0x0018 +#define ENETC_PSIPMAR0 0x0100 +#define ENETC_PSIPMAR1 0x0104 +#define ENETC_PCAPR0 0x0900 +#define ENETC_PCAPRO_MDIO BIT(11) +#define ENETC_PSICFGR(n) (0x0940 + (n) * 0x10) +#define ENETC_PSICFGR_SET_TXBDR(val) ((val) & 0xff) +#define ENETC_PSICFGR_SET_RXBDR(val) (((val) & 0xff) << 16) +/* MAC configuration */ +#define ENETC_PM_CC 0x8008 +#define ENETC_PM_CC_DEFAULT 0x0810 +#define ENETC_PM_CC_RX_TX_EN 0x8813 +#define ENETC_PM_MAXFRM 0x8014 +#define ENETC_RX_MAXFRM_SIZE PKTSIZE +#define ENETC_PM_IMDIO_BASE 0x8030 +#define ENETC_PM_IF_MODE 0x8300 +#define ENETC_PM_IF_MODE_RG BIT(2) +#define ENETC_PM_IF_MODE_AN_ENA BIT(15) +#define ENETC_PM_IFM_SSP_MASK GENMASK(14, 13) +#define ENETC_PM_IFM_SSP_1000 (2 << 13) +#define ENETC_PM_IFM_SSP_100 (0 << 13) +#define ENETC_PM_IFM_SSP_10 (1 << 13) +#define ENETC_PM_IFM_FULL_DPX BIT(12) +#define ENETC_PM_IF_IFMODE_MASK GENMASK(1, 0) + +/* buffer descriptors count must be multiple of 8 and aligned to 128 bytes */ +#define ENETC_BD_CNT 128 +#define ENETC_BD_ALIGN 128 + +/* single pair of Rx/Tx rings */ +#define ENETC_RX_BDR_CNT 1 +#define ENETC_TX_BDR_CNT 1 +#define ENETC_RX_BDR_ID 0 +#define ENETC_TX_BDR_ID 0 + +/* Tx buffer descriptor */ +struct enetc_tx_bd { + __le64 addr; + __le16 buf_len; + __le16 frm_len; + __le16 err_csum; + __le16 flags; +} __packed; + +#define ENETC_TXBD_FLAGS_F BIT(15) +#define ENETC_POLL_TRIES 32000 + +/* Rx buffer descriptor */ +union enetc_rx_bd { + /* SW provided BD format */ + struct { + __le64 addr; + u8 reserved[8]; + } w; + + /* ENETC returned BD format */ + struct { + __le16 inet_csum; + __le16 parse_summary; + __le32 rss_hash; + __le16 buf_len; + __le16 vlan_opt; + union { + struct { + __le16 flags; + __le16 error; + } __packed; + __le32 lstatus; + }; + } r; +} __packed; + +#define ENETC_RXBD_STATUS_R(status) (((status) >> 30) & 0x1) +#define ENETC_RXBD_STATUS_F(status) (((status) >> 31) & 0x1) +#define ENETC_RXBD_STATUS_ERRORS(status) (((status) >> 16) & 0xff) +#define ENETC_RXBD_STATUS(flags) ((flags) << 16) + +/* Tx/Rx ring info */ +struct bd_ring { + void *cons_idx; + void *prod_idx; + /* next BD index to use */ + int next_prod_idx; + int next_cons_idx; + int bd_count; +}; + +/* ENETC private structure */ +struct enetc_priv { + struct eth_device edev; + struct device *dev; + + struct enetc_tx_bd *enetc_txbd; + union enetc_rx_bd *enetc_rxbd; + + dma_addr_t rx_pkg_phys[ENETC_BD_CNT]; + void *rx_pkg[ENETC_BD_CNT]; + + void *regs_base; /* base ENETC registers */ + void *port_regs; /* base ENETC port registers */ + + /* Rx/Tx buffer descriptor rings info */ + struct bd_ring tx_bdr; + struct bd_ring rx_bdr; + + int uclass_id; + struct phy_device *phy; +}; + +/* register accessors */ +#define enetc_read_reg(x) readl((x)) +#define enetc_write_reg(x, val) writel((val), (x)) +#define enetc_read(priv, off) enetc_read_reg((priv)->regs_base + (off)) +#define enetc_write(priv, off, v) \ + enetc_write_reg((priv)->regs_base + (off), v) + +/* port register accessors */ +#define enetc_port_regs(priv, off) ((priv)->port_regs + (off)) +#define enetc_read_port(priv, off) \ + enetc_read_reg(enetc_port_regs((priv), (off))) +#define enetc_write_port(priv, off, v) \ + enetc_write_reg(enetc_port_regs((priv), (off)), v) + +/* BDR register accessors, see ENETC_BDR() */ +#define enetc_bdr_read(priv, t, n, off) \ + enetc_read(priv, ENETC_BDR(t, n, off)) +#define enetc_bdr_write(priv, t, n, off, val) \ + enetc_write(priv, ENETC_BDR(t, n, off), val) + +/* PCS / internal SoC PHY ID, it defaults to 0 on all interfaces */ +#define ENETC_PCS_PHY_ADDR 0 + +/* PCS registers */ +#define ENETC_PCS_CR 0x00 +#define ENETC_PCS_CR_RESET_AN 0x1200 +#define ENETC_PCS_CR_DEF_VAL 0x0140 +#define ENETC_PCS_CR_RST BIT(15) +#define ENETC_PCS_DEV_ABILITY 0x04 +#define ENETC_PCS_DEV_ABILITY_SGMII 0x4001 +#define ENETC_PCS_DEV_ABILITY_SXGMII 0x5001 +#define ENETC_PCS_LINK_TIMER1 0x12 +#define ENETC_PCS_LINK_TIMER1_VAL 0x06a0 +#define ENETC_PCS_LINK_TIMER2 0x13 +#define ENETC_PCS_LINK_TIMER2_VAL 0x0003 +#define ENETC_PCS_IF_MODE 0x14 +#define ENETC_PCS_IF_MODE_SGMII BIT(0) +#define ENETC_PCS_IF_MODE_SGMII_AN BIT(1) +#define ENETC_PCS_IF_MODE_SPEED_1G BIT(3) + +/* PCS replicator block for USXGMII */ +#define ENETC_PCS_DEVAD_REPL 0x1f + +#define ENETC_PCS_REPL_LINK_TIMER_1 0x12 +#define ENETC_PCS_REPL_LINK_TIMER_1_DEF 0x0003 +#define ENETC_PCS_REPL_LINK_TIMER_2 0x13 +#define ENETC_PCS_REPL_LINK_TIMER_2_DEF 0x06a0 + +/* ENETC external MDIO registers */ +#define ENETC_MDIO_BASE 0x1c00 +#define ENETC_MDIO_CFG 0x00 +#define ENETC_EMDIO_CFG_C22 0x00809508 +#define ENETC_EMDIO_CFG_C45 0x00809548 +#define ENETC_EMDIO_CFG_RD_ER BIT(1) +#define ENETC_EMDIO_CFG_BSY BIT(0) +#define ENETC_MDIO_CTL 0x04 +#define ENETC_MDIO_CTL_READ BIT(15) +#define ENETC_MDIO_DATA 0x08 +#define ENETC_MDIO_STAT 0x0c + +#define ENETC_MDIO_READ_ERR 0xffff + +struct enetc_mdio_priv { + void *regs_base; + struct mii_bus bus; +}; + +/* + * these functions are implemented by ENETC_MDIO and are re-used by ENETC driver + * to drive serdes / internal SoC PHYs + */ +int enetc_mdio_read_priv(struct enetc_mdio_priv *priv, int addr, int devad, + int reg); +int enetc_mdio_write_priv(struct enetc_mdio_priv *priv, int addr, int devad, + int reg, u16 val); + +/* sets up primary MAC addresses in DT/IERB */ +void fdt_fixup_enetc_mac(void *blob); + +#endif /* _ENETC_H */ diff --git a/drivers/net/fsl_enetc_mdio.c b/drivers/net/fsl_enetc_mdio.c new file mode 100644 index 0000000000..153f5e6452 --- /dev/null +++ b/drivers/net/fsl_enetc_mdio.c @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ENETC ethernet controller driver + * Copyright 2019 NXP + */ + +#include +#include +#include +#include +#include +#include + +#include "fsl_enetc.h" + +static void enetc_mdio_wait_bsy(struct enetc_mdio_priv *priv) +{ + int to = 10000; + + while ((enetc_read(priv, ENETC_MDIO_CFG) & ENETC_EMDIO_CFG_BSY) && + --to) + cpu_relax(); + if (!to) + printf("T"); +} + +int enetc_mdio_read_priv(struct enetc_mdio_priv *priv, int addr, int devad, + int reg) +{ + if (devad == MDIO_DEVAD_NONE) + enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C22); + else + enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C45); + enetc_mdio_wait_bsy(priv); + + if (devad == MDIO_DEVAD_NONE) { + enetc_write(priv, ENETC_MDIO_CTL, ENETC_MDIO_CTL_READ | + (addr << 5) | reg); + } else { + enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + devad); + enetc_mdio_wait_bsy(priv); + + enetc_write(priv, ENETC_MDIO_STAT, reg); + enetc_mdio_wait_bsy(priv); + + enetc_write(priv, ENETC_MDIO_CTL, ENETC_MDIO_CTL_READ | + (addr << 5) | devad); + } + + enetc_mdio_wait_bsy(priv); + if (enetc_read(priv, ENETC_MDIO_CFG) & ENETC_EMDIO_CFG_RD_ER) + return ENETC_MDIO_READ_ERR; + + return enetc_read(priv, ENETC_MDIO_DATA); +} + +int enetc_mdio_write_priv(struct enetc_mdio_priv *priv, int addr, int devad, + int reg, u16 val) +{ + if (devad == MDIO_DEVAD_NONE) + enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C22); + else + enetc_write(priv, ENETC_MDIO_CFG, ENETC_EMDIO_CFG_C45); + enetc_mdio_wait_bsy(priv); + + if (devad != MDIO_DEVAD_NONE) { + enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + devad); + enetc_write(priv, ENETC_MDIO_STAT, reg); + } else { + enetc_write(priv, ENETC_MDIO_CTL, (addr << 5) + reg); + } + enetc_mdio_wait_bsy(priv); + + enetc_write(priv, ENETC_MDIO_DATA, val); + enetc_mdio_wait_bsy(priv); + + return 0; +} + +static int enetc_mdio_read(struct mii_bus *bus, int addr, int reg) +{ + struct enetc_mdio_priv *priv = bus->priv; + + return enetc_mdio_read_priv(priv, addr, MDIO_DEVAD_NONE, reg); +} + +static int enetc_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct enetc_mdio_priv *priv = bus->priv; + + return enetc_mdio_write_priv(priv, addr, MDIO_DEVAD_NONE, reg, val); +} + +static int enetc_mdio_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct enetc_mdio_priv *priv; + int ret; + + pci_enable_device(pdev); + pci_set_master(pdev); + + priv = xzalloc(sizeof(*priv)); + + priv->regs_base = pci_iomap(pdev, 0); + if (!priv->regs_base) { + dev_err(&pdev->dev, "failed to map BAR0\n"); + return -EINVAL; + } + + priv->regs_base += ENETC_MDIO_BASE; + + priv->bus.read = enetc_mdio_read; + priv->bus.write = enetc_mdio_write; + priv->bus.parent = &pdev->dev; + priv->bus.priv = priv; + + return mdiobus_register(&priv->bus); +} + +static DEFINE_PCI_DEVICE_TABLE(enetc_mdio_pci_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_ENETC_MDIO) }, + { }, +}; + +static struct pci_driver enetc_mdio_driver = { + .name = "fsl_enetc_mdio", + .id_table = enetc_mdio_pci_tbl, + .probe = enetc_mdio_probe, +}; +device_pci_driver(enetc_mdio_driver); -- 2.39.2