From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH v2 15/21] ARM: enable Layerscape boards in multi_v8_defconfig
Date: Tue, 9 Jan 2024 17:15:21 +0100 [thread overview]
Message-ID: <20240109161527.3237581-16-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20240109161527.3237581-1-s.hauer@pengutronix.de>
Now that Layerscape can do MULTIARCH enable the Layerscape boards
in multi_v8_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/configs/multi_v8_defconfig | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/configs/multi_v8_defconfig b/arch/arm/configs/multi_v8_defconfig
index 1851735eec..35fceabfd4 100644
--- a/arch/arm/configs/multi_v8_defconfig
+++ b/arch/arm/configs/multi_v8_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARCH_ARM64_VIRT=y
CONFIG_ARCH_IMX=y
CONFIG_ARCH_K3=y
+CONFIG_ARCH_LAYERSCAPE=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_MACH_INNOCOMM_WB15=y
@@ -19,6 +20,10 @@ CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP=y
CONFIG_MACH_ZII_IMX8MQ_DEV=y
CONFIG_MACH_TQ_MBA9XXXCA=y
CONFIG_IMX_IIM=y
+CONFIG_ARCH_LAYERSCAPE_PPA=y
+CONFIG_MACH_LS1028ARDB=y
+CONFIG_MACH_LS1046ARDB=y
+CONFIG_MACH_TQMLS1046A=y
CONFIG_MACH_BEAGLEPLAY=y
CONFIG_MACH_RK3568_EVB=y
CONFIG_MACH_RK3568_BPI_R2PRO=y
@@ -149,6 +154,8 @@ CONFIG_VIRTIO_CONSOLE=y
CONFIG_DRIVER_NET_DESIGNWARE_IMX8=y
CONFIG_DRIVER_NET_DESIGNWARE_ROCKCHIP=y
CONFIG_DRIVER_NET_FEC_IMX=y
+CONFIG_DRIVER_NET_FSL_ENETC=y
+CONFIG_DRIVER_NET_FSL_FMAN=y
CONFIG_DRIVER_NET_MACB=y
CONFIG_DRIVER_NET_VIRTIO=y
CONFIG_DP83867_PHY=y
@@ -164,6 +171,7 @@ CONFIG_NET_USB_ASIX=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_NET_USB_SMSC95XX=y
CONFIG_NET_USB_RTL8152=y
+CONFIG_DRIVER_SPI_FSL_QUADSPI=y
CONFIG_DRIVER_SPI_IMX=y
CONFIG_SPI_NXP_FLEXSPI=y
CONFIG_I2C=y
@@ -171,6 +179,8 @@ CONFIG_I2C_GPIO=y
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_RK3X=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_M25P80=y
@@ -208,6 +218,8 @@ CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
CONFIG_LED_TRIGGERS=y
+CONFIG_LED_PCA955X=y
+CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_AT24=y
CONFIG_VIRTIO_INPUT=y
CONFIG_WATCHDOG=y
@@ -228,6 +240,7 @@ CONFIG_REGULATOR_FIXED=y
CONFIG_REGULATOR_ARM_SCMI=y
CONFIG_REGULATOR_RK808=y
CONFIG_RESET_IMX7=y
+CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_ECAM_GENERIC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
--
2.39.2
next prev parent reply other threads:[~2024-01-09 16:17 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-09 16:15 [PATCH v2 00/21] Add more Layerscape LS1028a stuff Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 01/21] memory: Fix reserve_sdram_region() return value Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 02/21] ARM: Layerscape: consolidate initcalls into one Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 03/21] ARM: Layerscape: LS1028a: reserve DDR region for TF-A Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 04/21] ARM: Layerscape: icid: make readonly arrays const Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 05/21] ARM: Layerscape: icid: rename functions Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 06/21] ARM: Layerscape: icid: move re-usable code to separate functions Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 07/21] ARM: Layerscape: icid: use of_property_write_u32_array() in of_set_iommu_prop() Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 08/21] ARM: Layerscape: icid: use of_property_write_u32_array() in of_set_qportal_iommu_prop() Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 09/21] ARM: Layerscape: icid: factor out setup_icid_offsets() Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 10/21] immap_lsch3: Add more stuff Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 11/21] ARM: Layerscape: LS1028a: fixup icids Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 12/21] ARM: psci: make header self contained Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 13/21] ARM: Layerscape: LS1028a: add psci node Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 14/21] ARM: Layerscape: move over to MULTIARCH Sascha Hauer
2024-01-09 16:15 ` Sascha Hauer [this message]
2024-01-09 16:15 ` [PATCH v2 16/21] ARM: multi_v8_defconfig: disable CONFIG_MCI_STARTUP Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 17/21] clk: layerscape: increase PLL divider array Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 18/21] ARM: Layerscape: LS1028a: implement bootsource detection Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 19/21] ARM: Layerscape: LS1028a: extend layerscape image filetype detection for LS1028a Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 20/21] ARM: Layerscape: LS1028a: Add barebox update handler Sascha Hauer
2024-01-09 16:15 ` [PATCH v2 21/21] ARM: Layerscape: add basic support for NXP LS1028a RDB Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240109161527.3237581-16-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox