mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 00/18] Dynamic OP-TEE Loading
Date: Tue, 16 Jan 2024 18:07:20 +0100	[thread overview]
Message-ID: <20240116170738.209954-1-m.felsch@pengutronix.de> (raw)

Hi all,                                                                                                                                                                                                            
by this series it is supported to load OP-TEE to random DRAM locations.
The location is parsed and configured if the builtin OP-TEE contains a
header-v1. For this to work we needed to cleanup the imx-scratch code
(patches1-4).

I've tested this series on i.MX8MM and i.MX8MP SoCs using the eMMC and
QSPI boot mode. The USB boot mode was tested on i.MX8MM only.

This series is based on origin/next
(c324e9ea7f8808ae069cd8bd0aa53021c1239bd2).

Regards,
  Marco

Marco Felsch (17):
  ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros
  ARM: i.MX8M: bundle imx-scratch code
  ARM: i.MX8M: scratch: make imx_scratch_space private
  ARM: i.MX8M: romapi: refactor saving the bootrom log
  ARM: i.MX8M: scratch: add optee_hdr area
  common: limit BOOTM_OPTEE to 32bit systems
  common: add OPTEE_SHM_SIZE to configure optee shared memory
  optee: add header version check
  optee: add helper functions to set/get the optee memory base
  optee: optee_verify_header: constify optee_header
  ARM64: mmu: add dynamic optee memory mapping support
  ARM: i.MX8M: add dynamic optee memory of-fixup support
  drivers: tee: optee: add support for dynamic optee memory base address
  ARM: i.MX8M: atf: add support for optee hdr parsing
  ARM: i.MX8M: allow board code to configure the bl33 loadaddr
  ARM: i.MX8M: cleanup MX8M*_ATF_BL33_BASE_ADDR defines
  ARM: i.MX8M: fix optee of-fixup logic

Rouven Czerwinski (1):
  optee: add support to verify 64-bit headers as well

 .../boards/imx/zii-imx8mq-dev/openocd.cfg     | 10 +-
 arch/arm/boards/phytec-som-imx8mq/lowlevel.c  |  2 +-
 arch/arm/boards/zii-imx8mq-dev/lowlevel.c     |  2 +-
 arch/arm/cpu/mmu_64.c                         | 14 ++-
 arch/arm/mach-imx/Makefile                    |  2 +-
 arch/arm/mach-imx/atf.c                       | 83 +++++++++++++----
 arch/arm/mach-imx/esdctl.c                    |  4 +
 arch/arm/mach-imx/imx8m.c                     |  9 +-
 arch/arm/mach-imx/romapi.c                    | 35 +++----
 arch/arm/mach-imx/scratch.c                   | 91 +++++++++++++++++++
 arch/arm/mach-imx/xload-common.c              |  8 --
 arch/arm/mach-imx/xload-qspi.c                | 14 +--
 common/Kconfig                                | 11 ++-
 common/Makefile                               |  2 +-
 common/optee.c                                | 44 ++++++++-
 drivers/mci/imx-esdhc-pbl.c                   | 12 ++-
 drivers/tee/optee/of_fixup.c                  | 26 +++++-
 include/asm-generic/memory_layout.h           |  6 ++
 include/mach/imx/atf.h                        |  2 -
 include/mach/imx/romapi.h                     | 13 +--
 include/mach/imx/scratch.h                    | 21 +++++
 include/mach/imx/xload.h                      | 28 +++---
 include/tee/optee.h                           | 23 ++++-
 23 files changed, 347 insertions(+), 115 deletions(-)
 create mode 100644 arch/arm/mach-imx/scratch.c
 create mode 100644 include/mach/imx/scratch.h

-- 
2.39.2




             reply	other threads:[~2024-01-16 17:09 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-16 17:07 Marco Felsch [this message]
2024-01-16 17:07 ` [PATCH v2 01/18] ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros Marco Felsch
2024-01-16 17:07 ` [PATCH v2 02/18] ARM: i.MX8M: bundle imx-scratch code Marco Felsch
2024-01-17 14:36   ` Sascha Hauer
2024-01-18  9:11     ` Marco Felsch
2024-01-18 10:16       ` Sascha Hauer
2024-01-16 17:07 ` [PATCH v2 03/18] ARM: i.MX8M: scratch: make imx_scratch_space private Marco Felsch
2024-01-16 17:07 ` [PATCH v2 04/18] ARM: i.MX8M: romapi: refactor saving the bootrom log Marco Felsch
2024-01-16 17:07 ` [PATCH v2 05/18] ARM: i.MX8M: scratch: add optee_hdr area Marco Felsch
2024-01-17 15:00   ` Sascha Hauer
2024-01-18  9:07     ` Marco Felsch
2024-01-16 17:07 ` [PATCH v2 06/18] common: limit BOOTM_OPTEE to 32bit systems Marco Felsch
2024-01-16 17:07 ` [PATCH v2 07/18] common: add OPTEE_SHM_SIZE to configure optee shared memory Marco Felsch
2024-01-16 17:07 ` [PATCH v2 08/18] optee: add support to verify 64-bit headers as well Marco Felsch
2024-01-16 17:07 ` [PATCH v2 09/18] optee: add header version check Marco Felsch
2024-01-16 17:07 ` [PATCH v2 10/18] optee: add helper functions to set/get the optee memory base Marco Felsch
2024-01-16 17:07 ` [PATCH v2 11/18] optee: optee_verify_header: constify optee_header Marco Felsch
2024-01-16 17:07 ` [PATCH v2 12/18] ARM64: mmu: add dynamic optee memory mapping support Marco Felsch
2024-01-17 14:33   ` Sascha Hauer
2024-01-18  9:13     ` Marco Felsch
2024-01-18 10:17       ` Sascha Hauer
2024-01-16 17:07 ` [PATCH v2 13/18] ARM: i.MX8M: add dynamic optee memory of-fixup support Marco Felsch
2024-01-16 17:07 ` [PATCH v2 14/18] drivers: tee: optee: add support for dynamic optee memory base address Marco Felsch
2024-01-16 17:07 ` [PATCH v2 15/18] ARM: i.MX8M: atf: add support for optee hdr parsing Marco Felsch
2024-01-16 17:07 ` [PATCH v2 16/18] ARM: i.MX8M: allow board code to configure the bl33 loadaddr Marco Felsch
2024-01-16 17:07 ` [PATCH v2 17/18] ARM: i.MX8M: cleanup MX8M*_ATF_BL33_BASE_ADDR defines Marco Felsch
2024-01-16 17:07 ` [PATCH v2 18/18] ARM: i.MX8M: fix optee of-fixup logic Marco Felsch
2024-01-18 15:30   ` Sascha Hauer
2024-01-18 16:52     ` Marco Felsch
2024-01-19  8:02 ` [PATCH v2 00/18] Dynamic OP-TEE Loading Sascha Hauer
2024-01-19  8:09   ` Sascha Hauer
2024-01-19  8:20     ` Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240116170738.209954-1-m.felsch@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox