[PATCH v2 01/18] ARM: i.MX8M: atf: make use of imx8m*_save_bootrom_log macros

[Marco Felsch <m.felsch@pengutronix.de>]

Make use of the already existing macros and fix the memory bus width for
the i.MX8MQ.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> 
---
 arch/arm/mach-imx/atf.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-imx/atf.c b/arch/arm/mach-imx/atf.c
index f9baad862dc7..5dfa7eeb50b9 100644
--- a/arch/arm/mach-imx/atf.c
+++ b/arch/arm/mach-imx/atf.c
@@ -123,7 +123,7 @@ __noreturn void imx8mm_load_and_start_image_via_tfa(void)
 	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
 	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(32);
 
-	imx8m_save_bootrom_log((void *)arm_mem_scratch(endmem));
+	imx8mm_save_bootrom_log();
 	imx8mm_load_bl33(bl33);
 
 	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MM_OPTEE)) {
@@ -186,7 +186,7 @@ __noreturn void imx8mp_load_and_start_image_via_tfa(void)
 	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
 	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(32);
 
-	imx8m_save_bootrom_log((void *)arm_mem_scratch(endmem));
+	imx8mp_save_bootrom_log();
 	imx8mp_load_bl33(bl33);
 
 	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MP_OPTEE)) {
@@ -250,7 +250,7 @@ __noreturn void imx8mn_load_and_start_image_via_tfa(void)
 	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
 	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(16);
 
-	imx8m_save_bootrom_log((void *)arm_mem_scratch(endmem));
+	imx8mn_save_bootrom_log();
 	imx8mn_load_bl33(bl33);
 
 	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MN_OPTEE)) {
@@ -305,9 +305,9 @@ __noreturn void imx8mq_load_and_start_image_via_tfa(void)
 	const void *bl31;
 	size_t bl31_size;
 	void *bl33 = (void *)MX8M_ATF_BL33_BASE_ADDR;
-	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(16);
+	unsigned long endmem = MX8M_DDR_CSD1_BASE_ADDR + imx8m_barebox_earlymem_size(32);
 
-	imx8m_save_bootrom_log((void *)arm_mem_scratch(endmem));
+	imx8mq_save_bootrom_log();
 	imx8mq_load_bl33(bl33);
 
 	if (IS_ENABLED(CONFIG_FIRMWARE_IMX8MQ_OPTEE)) {
-- 
2.39.2