[PATCH 08/12] mci: core: parse more host capabilities from DT

[Steffen Trumtrar <s.trumtrar@pengutronix.de>]

Port the linux v6.7 mmc host caps2 parsing.
While at it, remove the ->no_sd and ->no_sdio. These are bits in the
caps2 field.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
 drivers/mci/mci-core.c | 34 ++++++++++++++++++++++++++++------
 include/mci.h          | 32 ++++++++++++++++++++++++++++++--
 2 files changed, 58 insertions(+), 8 deletions(-)

diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index 2b39985d5e..cd046149b4 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -2029,7 +2029,7 @@ static int mci_card_probe(struct mci *mci)
 		goto on_error;
 	}
 
-	if (!host->no_sdio) {
+	if (!(host->caps2 & MMC_CAP2_NO_SDIO)) {
 		rc = sdio_send_op_cond(mci);
 		if (!rc) {
 			mci->ready_for_use = true;
@@ -2040,11 +2040,11 @@ static int mci_card_probe(struct mci *mci)
 	}
 
 	/* Check if this card can handle the "SD Card Physical Layer Specification 2.0" */
-	if (!host->no_sd) {
+	if (!(host->caps2 & MMC_CAP2_NO_SD)) {
 		rc = sd_send_if_cond(mci);
 		rc = sd_send_op_cond(mci);
 	}
-	if (host->no_sd || rc == -ETIMEDOUT) {
+	if ((host->caps2 & MMC_CAP2_NO_SD) || rc == -ETIMEDOUT) {
 		/* If SD card initialization was skipped or if it timed out,
 		 * we check for an MMC card */
 		dev_dbg(&mci->dev, "Card seems to be a MultiMediaCard\n");
@@ -2251,7 +2251,7 @@ int mci_register(struct mci_host *host)
 	if (IS_ENABLED(CONFIG_MCI_STARTUP))
 		mci_card_probe(mci);
 
-	if (!host->no_sd && dev_of_node(host->hw_dev))
+	if (!(host->caps2 & MMC_CAP2_NO_SD) && dev_of_node(host->hw_dev))
 		of_register_fixup(of_broken_cd_fixup, host);
 
 	list_add_tail(&mci->list, &mci_list);
@@ -2322,9 +2322,31 @@ void mci_of_parse_node(struct mci_host *host,
 
 	host->broken_cd = of_property_read_bool(np, "broken-cd");
 	host->non_removable = of_property_read_bool(np, "non-removable");
-	host->no_sd = of_property_read_bool(np, "no-sd");
-	host->no_sdio = of_property_read_bool(np, "no-sdio");
 	host->disable_wp = of_property_read_bool(np, "disable-wp");
+
+	if (of_property_read_bool(np, "full-pwr-cycle"))
+		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
+	if (of_property_read_bool(np, "full-pwr-cycle-in-suspend"))
+		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND;
+	if (of_property_read_bool(np, "mmc-hs200-1_8v"))
+		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
+	if (of_property_read_bool(np, "mmc-hs200-1_2v"))
+		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
+	if (of_property_read_bool(np, "mmc-hs400-1_8v"))
+		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+	if (of_property_read_bool(np, "mmc-hs400-1_2v"))
+		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
+	if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
+		host->caps2 |= MMC_CAP2_HS400_ES;
+	if (of_property_read_bool(np, "no-sdio"))
+		host->caps2 |= MMC_CAP2_NO_SDIO;
+	if (of_property_read_bool(np, "no-sd"))
+		host->caps2 |= MMC_CAP2_NO_SD;
+	if (of_property_read_bool(np, "no-mmc"))
+		host->caps2 |= MMC_CAP2_NO_MMC;
+	if (of_property_read_bool(np, "no-mmc-hs400"))
+		host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V |
+				 MMC_CAP2_HS400_ES);
 }
 
 void mci_of_parse(struct mci_host *host)
diff --git a/include/mci.h b/include/mci.h
index 9a52e3f360..ed2967c889 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -468,6 +468,36 @@ struct mci_host {
 	const char *devname;		/**< the devicename for the card, defaults to disk%d */
 	unsigned voltages;
 	unsigned host_caps;	/**< Host's interface capabilities, refer MMC_VDD_* */
+	unsigned caps2;		/* More host capabilities */
+#define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
+#define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
+#define MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND (1 << 3) /* Can do full power cycle in suspend */
+#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
+#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
+#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
+				 MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_SD_EXP		(1 << 7)	/* SD express via PCIe */
+#define MMC_CAP2_SD_EXP_1_2V	(1 << 8)	/* SD express 1.2V */
+#define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
+#define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
+#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
+#define MMC_CAP2_HS400_1_8V	(1 << 15)	/* Can support HS400 1.8V */
+#define MMC_CAP2_HS400_1_2V	(1 << 16)	/* Can support HS400 1.2V */
+#define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
+				 MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_HSX00_1_8V	(MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V)
+#define MMC_CAP2_HSX00_1_2V	(MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
+#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18)	/* No physical write protect pin, assume that card is always read-write */
+#define MMC_CAP2_NO_SDIO	(1 << 19)	/* Do not send SDIO commands during initialization */
+#define MMC_CAP2_HS400_ES	(1 << 20)	/* Host supports enhanced strobe */
+#define MMC_CAP2_NO_SD		(1 << 21)	/* Do not send SD commands during initialization */
+#define MMC_CAP2_NO_MMC		(1 << 22)	/* Do not send (e)MMC commands during initialization */
+#define MMC_CAP2_CQE		(1 << 23)	/* Has eMMC command queue engine */
+#define MMC_CAP2_CQE_DCMD	(1 << 24)	/* CQE can issue a direct command */
+#define MMC_CAP2_AVOID_3_3V	(1 << 25)	/* Host must negotiate down from 3.3V */
+#define MMC_CAP2_MERGE_CAPABLE	(1 << 26)	/* Host can merge a segment over the segment size */
+#define MMC_CAP2_CRYPTO		0
 	unsigned f_min;		/**< host interface lower limit */
 	unsigned f_max;		/**< host interface upper limit */
 	unsigned clock;		/**< Current clock used to talk to the card */
@@ -478,8 +508,6 @@ struct mci_host {
 	int use_dsr;		/**< optional dsr usage flag */
 	int broken_cd;		/**< card detect is broken */
 	bool non_removable;	/**< device is non removable */
-	bool no_sd;		/**< do not send SD commands during initialization */
-	bool no_sdio;		/**< do not send SDIO commands during initialization */
 	bool disable_wp;	/**< ignore write-protect detection logic */
 	struct regulator *supply;
 

-- 
2.40.1