From: Bastian Krause <bst@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>,
Bastian Krause <bst@pengutronix.de>
Subject: [PATCH 1/2] ARM: i.MX8MM: set SION bits for i2c2, i2c3, i2c4 mux options
Date: Fri, 8 Mar 2024 15:20:51 +0100 [thread overview]
Message-ID: <20240308142052.2683407-1-bst@pengutronix.de> (raw)
i2c data lines are bidirectional, so the SION bit should be set. For
i2c1, this is already the case. Apply the same to the remaining i2c mux
options.
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Bastian Krause <bst@pengutronix.de>
---
include/mach/imx/iomux-mx8mm.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/mach/imx/iomux-mx8mm.h b/include/mach/imx/iomux-mx8mm.h
index f2ebde3d3bf..ee0240f5383 100644
--- a/include/mach/imx/iomux-mx8mm.h
+++ b/include/mach/imx/iomux-mx8mm.h
@@ -614,32 +614,32 @@ enum {
IMX8MM_PAD_I2C1_SDA_ENET1_MDIO = IOMUX_PAD(0x0480, 0x0218, 1, 0x04C0, 2, 0),
IMX8MM_PAD_I2C1_SDA_GPIO5_IO15 = IOMUX_PAD(0x0480, 0x0218, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C2_SCL_I2C2_SCL = IOMUX_PAD(0x0484, 0x021C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SCL_I2C2_SCL = IOMUX_PAD(0x0484, 0x021C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C2_SCL_ENET1_1588_EVENT1_IN = IOMUX_PAD(0x0484, 0x021C, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C2_SCL_USDHC3_CD_B = IOMUX_PAD(0x0484, 0x021C, 2, 0x0544, 1, 0),
IMX8MM_PAD_I2C2_SCL_GPIO5_IO16 = IOMUX_PAD(0x0484, 0x021C, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C2_SDA_I2C2_SDA = IOMUX_PAD(0x0488, 0x0220, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C2_SDA_I2C2_SDA = IOMUX_PAD(0x0488, 0x0220, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C2_SDA_ENET1_1588_EVENT1_OUT = IOMUX_PAD(0x0488, 0x0220, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C2_SDA_USDHC3_WP = IOMUX_PAD(0x0488, 0x0220, 2, 0x0548, 1, 0),
IMX8MM_PAD_I2C2_SDA_GPIO5_IO17 = IOMUX_PAD(0x0488, 0x0220, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C3_SCL_I2C3_SCL = IOMUX_PAD(0x048C, 0x0224, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SCL_I2C3_SCL = IOMUX_PAD(0x048C, 0x0224, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SCL_PWM4_OUT = IOMUX_PAD(0x048C, 0x0224, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SCL_GPT2_CLK = IOMUX_PAD(0x048C, 0x0224, 2, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SCL_GPIO5_IO18 = IOMUX_PAD(0x048C, 0x0224, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C3_SDA_I2C3_SDA = IOMUX_PAD(0x0490, 0x0228, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C3_SDA_I2C3_SDA = IOMUX_PAD(0x0490, 0x0228, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SDA_PWM3_OUT = IOMUX_PAD(0x0490, 0x0228, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SDA_GPT3_CLK = IOMUX_PAD(0x0490, 0x0228, 2, 0x0000, 0, 0),
IMX8MM_PAD_I2C3_SDA_GPIO5_IO19 = IOMUX_PAD(0x0490, 0x0228, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C4_SCL_I2C4_SCL = IOMUX_PAD(0x0494, 0x022C, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SCL_I2C4_SCL = IOMUX_PAD(0x0494, 0x022C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C4_SCL_PWM2_OUT = IOMUX_PAD(0x0494, 0x022C, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C4_SCL_PCIE1_CLKREQ_B = IOMUX_PAD(0x0494, 0x022C, 2, 0x0524, 0, 0),
IMX8MM_PAD_I2C4_SCL_GPIO5_IO20 = IOMUX_PAD(0x0494, 0x022C, 5, 0x0000, 0, 0),
- IMX8MM_PAD_I2C4_SDA_I2C4_SDA = IOMUX_PAD(0x0498, 0x0230, 0, 0x0000, 0, 0),
+ IMX8MM_PAD_I2C4_SDA_I2C4_SDA = IOMUX_PAD(0x0498, 0x0230, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
IMX8MM_PAD_I2C4_SDA_PWM1_OUT = IOMUX_PAD(0x0498, 0x0230, 1, 0x0000, 0, 0),
IMX8MM_PAD_I2C4_SDA_GPIO5_IO21 = IOMUX_PAD(0x0498, 0x0230, 5, 0x0000, 0, 0),
--
2.39.2
next reply other threads:[~2024-03-08 14:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-08 14:20 Bastian Krause [this message]
2024-03-08 14:20 ` [PATCH 2/2] ARM: i.MX8MN: set SION bits for i2c " Bastian Krause
2024-03-11 10:57 ` [PATCH 1/2] ARM: i.MX8MM: set SION bits for i2c2, i2c3, i2c4 " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240308142052.2683407-1-bst@pengutronix.de \
--to=bst@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox