From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH] net: cpsw: map/unmap buffers used for DMA
Date: Wed, 13 Mar 2024 18:50:02 +0100 [thread overview]
Message-ID: <20240313175002.3200363-1-a.fatoum@pengutronix.de> (raw)
This doesn't fix any bugs, but it allows CONFIG_DMA_API_DEBUG to check
for any future issues that may be introduced.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/net/cpsw.c | 46 ++++++++++++++++++++++++++++------------------
1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 3f24c21594c1..31ca61a230e9 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -804,7 +804,8 @@ static void cpdma_desc_free(struct cpsw_priv *priv, struct cpdma_desc *desc)
}
static int cpdma_submit(struct cpsw_priv *priv, struct cpdma_chan *chan,
- void *buffer, int len, int port)
+ void *sw_buffer, dma_addr_t hw_buffer,
+ int len, int port)
{
struct cpdma_desc *desc, *prev;
u32 mode;
@@ -823,10 +824,10 @@ static int cpdma_submit(struct cpsw_priv *priv, struct cpdma_chan *chan,
(port << CPDMA_FROM_TO_PORT_SHIFT);
writel(0, &desc->hw_next);
- writel((u32)buffer, &desc->hw_buffer);
+ writel(hw_buffer, &desc->hw_buffer);
writel(len, &desc->hw_len);
writel(mode | len, &desc->hw_mode);
- writel((u32)buffer, &desc->sw_buffer);
+ writel((u32)sw_buffer, &desc->sw_buffer);
writel((u32)len, &desc->sw_len);
if (!chan->head) {
@@ -853,7 +854,7 @@ static int cpdma_submit(struct cpsw_priv *priv, struct cpdma_chan *chan,
}
static int cpdma_process(struct cpsw_slave *slave, struct cpdma_chan *chan,
- void **buffer, int *len)
+ void **buffer, dma_addr_t *dma, int *len)
{
struct cpdma_desc *desc = chan->head;
struct cpsw_priv *priv = slave->cpsw;
@@ -867,6 +868,8 @@ static int cpdma_process(struct cpsw_slave *slave, struct cpdma_chan *chan,
if (len)
*len = status & 0x7ff;
+ if (dma)
+ *dma = readl(&desc->hw_buffer);
if (buffer)
*buffer = (void *)readl(&desc->sw_buffer);
@@ -982,8 +985,15 @@ static int cpsw_setup(struct device *dev)
/* submit rx descs */
for (i = 0; i < PKTBUFSRX - 2; i++) {
- ret = cpdma_submit(priv, &priv->rx_chan, priv->rx_buffer[i],
- PKTSIZE, 0);
+ void *buffer = priv->rx_buffer[i];
+ unsigned len = PKTSIZE;
+ dma_addr_t dma;
+
+ dma = dma_map_single(priv->dev, buffer, len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(priv->dev, dma))
+ return -EFAULT;
+
+ ret = cpdma_submit(priv, &priv->rx_chan, buffer, dma, len, 0);
if (ret < 0) {
dev_err(dev, "error %d submitting rx desc\n", ret);
break;
@@ -1014,20 +1024,21 @@ static int cpsw_send(struct eth_device *edev, void *packet, int length)
{
struct cpsw_slave *slave = edev->priv;
struct cpsw_priv *priv = slave->cpsw;
- void *buffer;
- int ret, len;
+ dma_addr_t dma;
+ int ret;
dev_dbg(&slave->dev, "* %s slave %d\n", __func__, slave->slave_num);
/* first reap completed packets */
- while (cpdma_process(slave, &priv->tx_chan, &buffer, &len) >= 0);
+ while (cpdma_process(slave, &priv->tx_chan, NULL, NULL, NULL) >= 0)
+ ;
dev_dbg(&slave->dev, "%s: %i bytes @ 0x%p\n", __func__, length, packet);
- dma_sync_single_for_device(priv->dev, (unsigned long)packet, length, DMA_TO_DEVICE);
- ret = cpdma_submit(priv, &priv->tx_chan, packet,
+ dma = dma_map_single(priv->dev, packet, length, DMA_TO_DEVICE);
+ ret = cpdma_submit(priv, &priv->tx_chan, packet, dma,
length, BIT(slave->slave_num));
- dma_sync_single_for_cpu(priv->dev, (unsigned long)packet, length, DMA_TO_DEVICE);
+ dma_unmap_single(priv->dev, dma, length, DMA_TO_DEVICE);
return ret;
}
@@ -1036,16 +1047,15 @@ static int cpsw_recv(struct eth_device *edev)
{
struct cpsw_slave *slave = edev->priv;
struct cpsw_priv *priv = slave->cpsw;
+ dma_addr_t dma;
void *buffer;
int len;
- while (cpdma_process(slave, &priv->rx_chan, &buffer, &len) >= 0) {
- dma_sync_single_for_cpu(priv->dev, (unsigned long)buffer, len,
- DMA_FROM_DEVICE);
+ while (cpdma_process(slave, &priv->rx_chan, &buffer, &dma, &len) >= 0) {
+ dma_sync_single_for_cpu(priv->dev, dma, len, DMA_FROM_DEVICE);
net_receive(edev, buffer, len);
- dma_sync_single_for_device(priv->dev, (unsigned long)buffer, len,
- DMA_FROM_DEVICE);
- cpdma_submit(priv, &priv->rx_chan, buffer, PKTSIZE, 0);
+ dma_sync_single_for_device(priv->dev, dma, len, DMA_FROM_DEVICE);
+ cpdma_submit(priv, &priv->rx_chan, buffer, dma, PKTSIZE, 0);
}
return 0;
--
2.39.2
next reply other threads:[~2024-03-13 17:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-13 17:50 Ahmad Fatoum [this message]
2024-03-15 7:12 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240313175002.3200363-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox