From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v3 03/14] mci: arasan: implement 25MHz quirk for zynqmp
Date: Fri, 15 Mar 2024 15:00:44 +0100 [thread overview]
Message-ID: <20240315-v2024-02-0-topic-arasan-hs200-support-v3-3-df268c2f4907@pengutronix.de> (raw)
In-Reply-To: <20240315-v2024-02-0-topic-arasan-hs200-support-v3-0-df268c2f4907@pengutronix.de>
The Arasan on the zynqmp in version 8.9a doesn't meet the timing
requirements at 25MHz. It works at 19MHz instead.
Add the quirk from linux kernel v6.8-rc4.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/mci/arasan-sdhci.c | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/mci/arasan-sdhci.c b/drivers/mci/arasan-sdhci.c
index 98f990b5c1..77e6086165 100644
--- a/drivers/mci/arasan-sdhci.c
+++ b/drivers/mci/arasan-sdhci.c
@@ -37,6 +37,12 @@ struct arasan_sdhci_host {
/* Controller does not have CD wired and will not function normally without */
#define SDHCI_ARASAN_QUIRK_FORCE_CDTEST BIT(0)
#define SDHCI_ARASAN_QUIRK_NO_1_8_V BIT(1)
+/*
+ * Some of the Arasan variations might not have timing requirements
+ * met at 25MHz for Default Speed mode, those controllers work at
+ * 19MHz instead
+ */
+#define SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN BIT(2)
};
static inline
@@ -110,13 +116,30 @@ static int arasan_sdhci_init(struct mci_host *mci, struct device *dev)
return 0;
}
+static void arasan_sdhci_set_clock(struct mci_host *mci, unsigned int clock)
+{
+ struct arasan_sdhci_host *host = to_arasan_sdhci_host(mci);
+
+ if (host->quirks & SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN) {
+ /*
+ * Some of the Arasan variations might not have timing
+ * requirements met at 25MHz for Default Speed mode,
+ * those controllers work at 19MHz instead.
+ */
+ if (clock == 25000000)
+ clock = (25000000 * 19) / 25;
+ }
+
+ sdhci_set_clock(&host->sdhci, clock, host->sdhci.max_clk);
+}
+
static void arasan_sdhci_set_ios(struct mci_host *mci, struct mci_ios *ios)
{
struct arasan_sdhci_host *host = to_arasan_sdhci_host(mci);
u16 val;
if (ios->clock)
- sdhci_set_clock(&host->sdhci, ios->clock, host->sdhci.max_clk);
+ arasan_sdhci_set_clock(mci, ios->clock);
sdhci_set_bus_width(&host->sdhci, ios->bus_width);
@@ -245,6 +268,9 @@ static int arasan_sdhci_probe(struct device *dev)
if (of_property_read_bool(np, "no-1-8-v"))
arasan_sdhci->quirks |= SDHCI_ARASAN_QUIRK_NO_1_8_V;
+ if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a"))
+ arasan_sdhci->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_25_BROKEN;
+
arasan_sdhci->sdhci.base = IOMEM(iores->start);
arasan_sdhci->sdhci.mci = mci;
mci->send_cmd = arasan_sdhci_send_cmd;
--
2.40.1
next prev parent reply other threads:[~2024-03-15 14:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-15 14:00 [PATCH v3 00/14] mci: add HS200 support for eMMCs Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 01/14] ARM: zynqmp: add sd_dll_reset call Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 02/14] zynqmp: firmware: add functions to set tap delay Steffen Trumtrar
2024-03-15 14:00 ` Steffen Trumtrar [this message]
2024-03-15 14:00 ` [PATCH v3 04/14] include: mci: sync mci_timing with linux Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 05/14] mci: arasan: read clk phases from DT Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 06/14] mci: core: save the set clock as actual_clock Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 07/14] mci: arasan: register sdcard/sampleclk Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 08/14] include: mci: add more EXT_CSD_CARD_TYPE_* Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 09/14] mci: core: parse more host capabilities from DT Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 10/14] mci: mci-core: add HS200 support Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 11/14] mci: mci-core: replace value with define Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 12/14] mci: sdhci: add tuning support Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 13/14] mci: arasan-sdhci: add HS200 tuning support on ZynqMP Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 14/14] mci: sdhci: replace sdhci_wait_idle Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240315-v2024-02-0-topic-arasan-hs200-support-v3-3-df268c2f4907@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox