From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH v3 08/14] include: mci: add more EXT_CSD_CARD_TYPE_*
Date: Fri, 15 Mar 2024 15:00:49 +0100 [thread overview]
Message-ID: <20240315-v2024-02-0-topic-arasan-hs200-support-v3-8-df268c2f4907@pengutronix.de> (raw)
In-Reply-To: <20240315-v2024-02-0-topic-arasan-hs200-support-v3-0-df268c2f4907@pengutronix.de>
Import missing EXT_CSD_CARD_TYPE_ defines from linux v6.7.
EXT_CSD_CARD_TYPE_SDR_1_8V/1_2V is unused in barebox. Replace with the
defines from linux.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
include/mci.h | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/include/mci.h b/include/mci.h
index fe0bd26888..a72ede8db5 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -293,13 +293,24 @@
#define EXT_CSD_CARD_TYPE_MASK 0x3f
#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
+ EXT_CSD_CARD_TYPE_HS_52)
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
/* DDR mode @1.8V or 3V I/O */
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
/* DDR mode @1.2V I/O */
-#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */
-#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
+#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
+#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
+ EXT_CSD_CARD_TYPE_HS200_1_2V)
+#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */
+#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
+#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
+ EXT_CSD_CARD_TYPE_HS400_1_2V)
+#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */
/* register PARTITIONS_ATTRIBUTE [156] */
#define EXT_CSD_ENH_USR_MASK (1 << 0)
--
2.40.1
next prev parent reply other threads:[~2024-03-15 14:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-15 14:00 [PATCH v3 00/14] mci: add HS200 support for eMMCs Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 01/14] ARM: zynqmp: add sd_dll_reset call Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 02/14] zynqmp: firmware: add functions to set tap delay Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 03/14] mci: arasan: implement 25MHz quirk for zynqmp Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 04/14] include: mci: sync mci_timing with linux Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 05/14] mci: arasan: read clk phases from DT Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 06/14] mci: core: save the set clock as actual_clock Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 07/14] mci: arasan: register sdcard/sampleclk Steffen Trumtrar
2024-03-15 14:00 ` Steffen Trumtrar [this message]
2024-03-15 14:00 ` [PATCH v3 09/14] mci: core: parse more host capabilities from DT Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 10/14] mci: mci-core: add HS200 support Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 11/14] mci: mci-core: replace value with define Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 12/14] mci: sdhci: add tuning support Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 13/14] mci: arasan-sdhci: add HS200 tuning support on ZynqMP Steffen Trumtrar
2024-03-15 14:00 ` [PATCH v3 14/14] mci: sdhci: replace sdhci_wait_idle Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240315-v2024-02-0-topic-arasan-hs200-support-v3-8-df268c2f4907@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox