From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 2/3] phy: rockchip: add pcie3 phy driver
Date: Wed, 3 Apr 2024 10:07:02 +0200 [thread overview]
Message-ID: <20240403080703.4098404-2-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20240403080703.4098404-1-s.hauer@pengutronix.de>
This adds support for the Rockchip PCIe3 phy found on RK35x8 SoCs. The
code is taken from Linux as of Linux-6.9-rc2.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/phy/rockchip/Kconfig | 5 +
drivers/phy/rockchip/Makefile | 1 +
.../phy/rockchip/phy-rockchip-snps-pcie3.c | 317 ++++++++++++++++++
3 files changed, 323 insertions(+)
create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index e6cee372e7..8a10190f8e 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -13,3 +13,8 @@ config PHY_ROCKCHIP_NANENG_COMBO_PHY
Enable this to support the Rockchip PCIe/USB3.0/SATA/QSGMII
combo PHY with NaNeng IP block.
+config PHY_ROCKCHIP_SNPS_PCIE3
+ bool "Rockchip Snps PCIe3 PHY Driver"
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
+ help
+ Enable this to support the Rockchip snps PCIe3 PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index 51ebf06aa1..1eaee4cbee 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY) += phy-rockchip-naneng-combphy.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3) += phy-rockchip-snps-pcie3.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 0000000000..7f39b261ca
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2022 Rockchip Electronics Co., Ltd.
+ */
+
+#include <of.h>
+#include <common.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+//#include <linux/phy/pcie.h>
+#include <mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1 0x4
+#define GRF_PCIE30PHY_CON6 0x18
+#define GRF_PCIE30PHY_CON9 0x24
+#define GRF_PCIE30PHY_DA_OCM (BIT(15) | BIT(31))
+#define GRF_PCIE30PHY_STATUS0 0x80
+#define GRF_PCIE30PHY_WR_EN (0xf << 16)
+#define SRAM_INIT_DONE(reg) (reg & BIT(14))
+
+#define RK3568_BIFURCATION_LANE_0_1 BIT(0)
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON 0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
+#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
+
+#define RK3588_BIFURCATION_LANE_0_1 BIT(0)
+#define RK3588_BIFURCATION_LANE_2_3 BIT(1)
+#define RK3588_LANE_AGGREGATION BIT(2)
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+ const struct rockchip_p3phy_ops *ops;
+ void __iomem *mmio;
+ /* mode: RC, EP */
+ int mode;
+ /* pcie30_phymode: Aggregation, Bifurcation */
+ int pcie30_phymode;
+ struct regmap *phy_grf;
+ struct regmap *pipe_grf;
+ struct reset_control *p30phy;
+ struct phy *phy;
+ struct clk_bulk_data *clks;
+ int num_clks;
+ int num_lanes;
+ u32 lanes[4];
+};
+
+struct rockchip_p3phy_ops {
+ int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+ struct phy *phy = priv->phy;
+ bool bifurcation = false;
+ int ret;
+ u32 reg;
+
+ /* Deassert PCIe PMA output clamp mode */
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9, GRF_PCIE30PHY_DA_OCM);
+
+ for (int i = 0; i < priv->num_lanes; i++) {
+ dev_info(&phy->dev, "lane number %d, val %d\n", i, priv->lanes[i]);
+ if (priv->lanes[i] > 1)
+ bifurcation = true;
+ }
+
+ /* Set bifurcation if needed, and it doesn't care RC/EP */
+ if (bifurcation) {
+ dev_info(&phy->dev, "bifurcation enabled\n");
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN | RK3568_BIFURCATION_LANE_0_1);
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+ GRF_PCIE30PHY_DA_OCM);
+ } else {
+ dev_dbg(&phy->dev, "bifurcation disabled\n");
+ regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+ GRF_PCIE30PHY_WR_EN & ~RK3568_BIFURCATION_LANE_0_1);
+ }
+
+ reset_control_deassert(priv->p30phy);
+
+ ret = regmap_read_poll_timeout(priv->phy_grf,
+ GRF_PCIE30PHY_STATUS0,
+ reg, SRAM_INIT_DONE(reg),
+ 500);
+ if (ret)
+ dev_err(&priv->phy->dev, "%s: lock failed 0x%x, check input refclk and power supply\n",
+ __func__, reg);
+ return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+ .phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+ u32 reg = 0;
+ u8 mode = 0;
+ int ret;
+
+ /* Deassert PCIe PMA output clamp mode */
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, BIT(8) | BIT(24));
+
+ /* Set bifurcation if needed */
+ for (int i = 0; i < priv->num_lanes; i++) {
+ if (!priv->lanes[i])
+ mode |= (BIT(i) << 3);
+
+ if (priv->lanes[i] > 1)
+ mode |= (BIT(i) >> 1);
+ }
+
+ if (!mode)
+ reg = RK3588_LANE_AGGREGATION;
+ else {
+ if (mode & (BIT(0) | BIT(1)))
+ reg |= RK3588_BIFURCATION_LANE_0_1;
+
+ if (mode & (BIT(2) | BIT(3)))
+ reg |= RK3588_BIFURCATION_LANE_2_3;
+ }
+
+ regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
+
+ /* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+ if (!IS_ERR(priv->pipe_grf)) {
+ reg = (mode & (BIT(6) | BIT(7))) >> 6;
+ if (reg)
+ regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+ (reg << 16) | reg);
+ }
+
+ reset_control_deassert(priv->p30phy);
+
+ ret = regmap_read_poll_timeout(priv->phy_grf,
+ RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+ reg, RK3588_SRAM_INIT_DONE(reg),
+ 500);
+ ret |= regmap_read_poll_timeout(priv->phy_grf,
+ RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+ reg, RK3588_SRAM_INIT_DONE(reg),
+ 500);
+ if (ret)
+ dev_err(&priv->phy->dev, "lock failed 0x%x, check input refclk and power supply\n",
+ reg);
+ return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+ .phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+ struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+ if (ret) {
+ dev_err(&priv->phy->dev, "failed to enable PCIe bulk clks %d\n", ret);
+ return ret;
+ }
+
+ reset_control_assert(priv->p30phy);
+ udelay(1);
+
+ if (priv->ops->phy_init) {
+ ret = priv->ops->phy_init(priv);
+ if (ret)
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ }
+
+ return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+ struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+ clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+ reset_control_assert(priv->p30phy);
+ return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+ .init = rochchip_p3phy_init,
+ .exit = rochchip_p3phy_exit,
+ .set_mode = rockchip_p3phy_set_mode,
+};
+
+static struct phy *rockchip_p3phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct rockchip_p3phy_priv *priv = dev->priv;
+
+ return priv->phy;
+}
+
+static int rockchip_p3phy_probe(struct device *dev)
+{
+ struct phy_provider *phy_provider;
+ struct rockchip_p3phy_priv *priv;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ int ret;
+
+ priv = xzalloc(sizeof(*priv));
+
+ res = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(res)) {
+ ret = PTR_ERR(res);
+ return ret;
+ }
+
+ priv->mmio = IOMEM(res->start);
+ if (IS_ERR(priv->mmio)) {
+ ret = PTR_ERR(priv->mmio);
+ return ret;
+ }
+
+ priv->ops = device_get_match_data(dev);
+ if (!priv->ops) {
+ dev_err(dev, "no of match data provided\n");
+ return -EINVAL;
+ }
+
+ priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+ if (IS_ERR(priv->phy_grf)) {
+ dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+ return PTR_ERR(priv->phy_grf);
+ }
+
+ if (of_device_is_compatible(np, "rockchip,rk3588-pcie3-phy")) {
+ priv->pipe_grf =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,pipe-grf");
+ if (IS_ERR(priv->pipe_grf))
+ dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+ } else {
+ priv->pipe_grf = NULL;
+ }
+
+ priv->num_lanes = of_property_read_variable_u32_array(dev->of_node, "data-lanes",
+ priv->lanes, 2,
+ ARRAY_SIZE(priv->lanes));
+
+ /* if no data-lanes assume aggregation */
+ if (priv->num_lanes == -EINVAL) {
+ dev_dbg(dev, "no data-lanes property found\n");
+ priv->num_lanes = 1;
+ priv->lanes[0] = 1;
+ } else if (priv->num_lanes < 0) {
+ dev_err(dev, "failed to read data-lanes property %d\n", priv->num_lanes);
+ return priv->num_lanes;
+ }
+
+ priv->phy = phy_create(dev, NULL, &rochchip_p3phy_ops);
+ if (IS_ERR(priv->phy)) {
+ dev_err(dev, "failed to create combphy\n");
+ return PTR_ERR(priv->phy);
+ }
+
+ priv->p30phy = reset_control_get_optional(dev, "phy");
+ if (IS_ERR(priv->p30phy)) {
+ return dev_err_probe(dev, PTR_ERR(priv->p30phy),
+ "failed to get phy reset control\n");
+ }
+ if (!priv->p30phy)
+ dev_info(dev, "no phy reset control specified\n");
+
+ priv->num_clks = clk_bulk_get_all(dev, &priv->clks);
+ if (priv->num_clks < 1)
+ return -ENODEV;
+
+ dev->priv = priv;
+ phy_set_drvdata(priv->phy, priv);
+ phy_provider = of_phy_provider_register(dev, rockchip_p3phy_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+ { .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+ { .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct driver rockchip_p3phy_driver = {
+ .probe = rockchip_p3phy_probe,
+ .name = "rockchip-snps-pcie3-phy",
+ .of_compatible = rockchip_p3phy_of_match,
+};
+coredevice_platform_driver(rockchip_p3phy_driver);
+
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
--
2.39.2
next prev parent reply other threads:[~2024-04-03 8:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 8:07 [PATCH 1/3] of: add of_property_read_variable_uxx_array() Sascha Hauer
2024-04-03 8:07 ` Sascha Hauer [this message]
2024-04-03 8:26 ` [PATCH 2/3] phy: rockchip: add pcie3 phy driver Ahmad Fatoum
2024-04-03 12:15 ` Sascha Hauer
2024-04-03 8:07 ` [PATCH 3/3] pci: ignore BAR when it doesn't fit into bus resource Sascha Hauer
2024-04-04 6:36 ` [PATCH 1/3] of: add of_property_read_variable_uxx_array() Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240403080703.4098404-2-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox