mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 7/8] mtd: nand: mxc_nand: implement exec_op
Date: Tue, 16 Apr 2024 11:53:12 +0200	[thread overview]
Message-ID: <20240416095313.1977242-8-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20240416095313.1977242-1-s.hauer@pengutronix.de>

This converts the driver to the more modern exec_op which gets us rid
of a bunch of legacy code. Tested on i.MX27 and i.MX25.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/nand/raw/mxc_nand.c | 426 ++++++++++----------------------
 1 file changed, 132 insertions(+), 294 deletions(-)

diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index d9e06a0014..bd320bf3b8 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -119,8 +119,7 @@ struct mxc_nand_host;
 
 struct mxc_nand_devtype_data {
 	void (*preset)(struct mtd_info *);
-	int (*read_page)(struct nand_chip *chip, void *buf, void *oob, bool ecc,
-			 int page);
+	int (*read_page)(struct nand_chip *chip);
 	void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
 	void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
 	void (*send_page)(struct mtd_info *, unsigned int);
@@ -175,8 +174,7 @@ struct mxc_nand_host {
 
 	struct completion	op_completion;
 
-	uint8_t			*data_buf;
-	unsigned int		buf_start;
+	void			*data_buf;
 
 	const struct mxc_nand_devtype_data *devtype_data;
 };
@@ -279,63 +277,6 @@ static void copy_spare(struct mtd_info *mtd, bool bfrom, void *buf)
 	}
 }
 
-/*
- * MXC NANDFC can only perform full page+spare or spare-only read/write.  When
- * the upper layers perform a read/write buf operation, the saved column address
- * is used to index into the full page. So usually this function is called with
- * column == 0 (unless no column cycle is needed indicated by column == -1)
- */
-static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
-{
-	struct nand_chip *nand_chip = mtd_to_nand(mtd);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	/* Write out column address, if necessary */
-	if (column != -1) {
-		host->devtype_data->send_addr(host, column & 0xff,
-					      page_addr == -1);
-		if (mtd->writesize > 512)
-			/* another col addr cycle for 2k page */
-			host->devtype_data->send_addr(host,
-						      (column >> 8) & 0xff,
-						      false);
-	}
-
-	/* Write out page address, if necessary */
-	if (page_addr != -1) {
-		/* paddr_0 - p_addr_7 */
-		host->devtype_data->send_addr(host, (page_addr & 0xff), false);
-
-		if (mtd->writesize > 512) {
-			if (mtd->size >= 0x10000000) {
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff,
-						false);
-				host->devtype_data->send_addr(host,
-						(page_addr >> 16) & 0xff,
-						true);
-			} else
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff, true);
-		} else {
-			if (nand_chip->options & NAND_ROW_ADDR_3) {
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff,
-						false);
-				host->devtype_data->send_addr(host,
-						(page_addr >> 16) & 0xff,
-						true);
-			} else
-				/* paddr_8 - paddr_15 */
-				host->devtype_data->send_addr(host,
-						(page_addr >> 8) & 0xff, true);
-		}
-	}
-}
-
 static int check_int_v3(struct mxc_nand_host *host)
 {
 	uint32_t tmp;
@@ -716,18 +657,7 @@ static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
 	writel(config2, NFC_V3_CONFIG2);
 }
 
-/* This functions is used by upper layer to checks if device is ready */
-static int mxc_nand_dev_ready(struct nand_chip *chip)
-{
-	/*
-	 * NFC handles R/B internally. Therefore, this function
-	 * always returns status as ready.
-	 */
-	return 1;
-}
-
-static int mxc_nand_read_page_v1(struct nand_chip *chip, void *buf, void *oob,
-				 bool ecc, int page)
+static int mxc_nand_read_page_v1(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
@@ -735,14 +665,6 @@ static int mxc_nand_read_page_v1(struct nand_chip *chip, void *buf, void *oob,
 	int i;
 	unsigned int ecc_stats = 0;
 
-	host->devtype_data->enable_hwecc(chip, ecc);
-
-	host->devtype_data->send_cmd(host, NAND_CMD_READ0, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	if (mtd->writesize > 512)
-		host->devtype_data->send_cmd(host, NAND_CMD_READSTART, true);
-
 	no_subpages = mtd->writesize >> 9;
 
 	for (i = 0; i < no_subpages; i++) {
@@ -760,78 +682,72 @@ static int mxc_nand_read_page_v1(struct nand_chip *chip, void *buf, void *oob,
 
 	host->ecc_stats_v1 = ecc_stats;
 
-	if (buf)
-		memcpy32_fromio(buf, host->main_area0, mtd->writesize);
-	if (oob)
-		copy_spare(mtd, true, oob);
-
 	return 0;
 }
 
-static int mxc_nand_read_page_v2_v3(struct nand_chip *chip, void *buf,
-				    void *oob, bool ecc, int page)
+static int mxc_nand_read_page_v2_v3(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
 
-	host->devtype_data->enable_hwecc(chip, ecc);
-
-	host->devtype_data->send_cmd(host, NAND_CMD_READ0, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	if (mtd->writesize > 512)
-		host->devtype_data->send_cmd(host,
-				NAND_CMD_READSTART, true);
-
 	host->devtype_data->send_page(mtd, NFC_OUTPUT);
 
-	if (buf)
-		memcpy32_fromio(buf, host->main_area0, mtd->writesize);
-	if (oob)
-		copy_spare(mtd, true, oob);
-
 	return 0;
 }
 
 static int mxc_nand_read_page(struct nand_chip *chip, uint8_t *buf,
 			      int oob_required, int page)
 {
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	void *oob_buf;
 	int ret;
 
-	if (oob_required)
-		oob_buf = chip->oob_poi;
-	else
-		oob_buf = NULL;
+	host->devtype_data->enable_hwecc(chip, true);
 
-	ret = host->devtype_data->read_page(chip, buf, oob_buf, 1, page);
+	ret = nand_read_page_op(chip, page, 0, buf, mtd->writesize);
 	if (ret)
 		return ret;
 
+	if (oob_required)
+		copy_spare(mtd, true, chip->oob_poi);
+
 	return host->devtype_data->get_ecc_status(chip);
 }
 
 static int mxc_nand_read_page_raw(struct nand_chip *chip, uint8_t *buf,
 				  int oob_required, int page)
 {
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	void *oob_buf;
+	int ret;
+
+	host->devtype_data->enable_hwecc(chip, false);
+
+	ret = nand_read_page_op(chip, page, 0, buf, mtd->writesize);
+	if (ret)
+		return ret;
 
 	if (oob_required)
-		oob_buf = chip->oob_poi;
-	else
-		oob_buf = NULL;
+		copy_spare(mtd, true, chip->oob_poi);
 
-	return host->devtype_data->read_page(chip, buf, oob_buf, 0, page);
+	return 0;
 }
 
 static int mxc_nand_read_oob(struct nand_chip *chip, int page)
 {
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
+	int ret;
+
+	host->devtype_data->enable_hwecc(chip, false);
+
+	ret = nand_read_page_op(chip, page, 0, NULL, 0);
+	if (ret)
+		return ret;
 
-	return host->devtype_data->read_page(chip, NULL, chip->oob_poi, 0,
-					     page);
+	copy_spare(mtd, true, chip->oob_poi);
+
+	return 0;
 }
 
 static int mxc_nand_write_page(struct nand_chip *chip, const uint8_t *buf,
@@ -842,17 +758,7 @@ static int mxc_nand_write_page(struct nand_chip *chip, const uint8_t *buf,
 
 	host->devtype_data->enable_hwecc(chip, ecc);
 
-	host->devtype_data->send_cmd(host, NAND_CMD_SEQIN, false);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	memcpy32_toio(host->main_area0, buf, mtd->writesize);
-	copy_spare(mtd, false, chip->oob_poi);
-
-	host->devtype_data->send_page(mtd, NFC_INPUT);
-	host->devtype_data->send_cmd(host, NAND_CMD_PAGEPROG, true);
-	mxc_do_addr_cycle(mtd, 0, page);
-
-	return 0;
+	return nand_prog_page_op(chip, page, 0, buf, mtd->writesize);
 }
 
 static int mxc_nand_write_page_ecc(struct nand_chip *chip, const uint8_t *buf,
@@ -877,66 +783,6 @@ static int mxc_nand_write_oob(struct nand_chip *chip, int page)
 	return mxc_nand_write_page(chip, host->data_buf, false, page);
 }
 
-static u_char mxc_nand_read_byte(struct nand_chip *nand_chip)
-{
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	uint8_t ret;
-
-	/* Check for status request */
-	if (host->status_request)
-		return host->devtype_data->get_dev_status(host) & 0xFF;
-
-	if (nand_chip->options & NAND_BUSWIDTH_16) {
-		/* only take the lower byte of each word */
-		ret = *(uint16_t *)(host->data_buf + host->buf_start);
-
-		host->buf_start += 2;
-	} else {
-		ret = *(uint8_t *)(host->data_buf + host->buf_start);
-		host->buf_start++;
-	}
-
-	dev_dbg(host->dev, "%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
-	return ret;
-}
-
-/* Write data of length len to buffer buf. The data to be
- * written on NAND Flash is first copied to RAMbuffer. After the Data Input
- * Operation by the NFC, the data is written to NAND Flash */
-static void mxc_nand_write_buf(struct nand_chip *nand_chip, const u_char *buf,
-			       int len)
-{
-	struct mtd_info *mtd = nand_to_mtd(nand_chip);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	u16 col = host->buf_start;
-	int n = mtd->oobsize + mtd->writesize - col;
-
-	n = min(n, len);
-
-	memcpy(host->data_buf + col, buf, n);
-
-	host->buf_start += n;
-}
-
-/* Read the data buffer from the NAND Flash. To read the data from NAND
- * Flash first the data output cycle is initiated by the NFC, which copies
- * the data to RAMbuffer. This data of length len is then copied to buffer buf.
- */
-static void mxc_nand_read_buf(struct nand_chip *nand_chip, u_char *buf,
-			      int len)
-{
-	struct mtd_info *mtd = nand_to_mtd(nand_chip);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-	u16 col = host->buf_start;
-	int n = mtd->oobsize + mtd->writesize - col;
-
-	n = min(n, len);
-
-	memcpy(buf, host->data_buf + col, n);
-
-	host->buf_start += n;
-}
-
 /* This function is used by upper layer for select and
  * deselect of the NAND chip */
 static void mxc_nand_select_chip_v1_v3(struct nand_chip *nand_chip, int chip)
@@ -1313,107 +1159,6 @@ static void preset_v3(struct mtd_info *mtd)
 	writel(0, NFC_V3_DELAY_LINE);
 }
 
-/* Used by the upper layer to write command to NAND Flash for
- * different operations to be carried out on NAND Flash */
-static void mxc_nand_command(struct nand_chip *nand_chip, unsigned command,
-			     int column, int page_addr)
-{
-	struct mtd_info *mtd = nand_to_mtd(nand_chip);
-	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
-
-	dev_dbg(host->dev, "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
-	      command, column, page_addr);
-
-	/* Reset command state information */
-	host->status_request = false;
-
-	/* Command pre-processing step */
-	switch (command) {
-	case NAND_CMD_RESET:
-		host->devtype_data->preset(mtd);
-		host->devtype_data->send_cmd(host, command, false);
-		break;
-
-	case NAND_CMD_STATUS:
-		host->buf_start = 0;
-		host->status_request = true;
-
-		host->devtype_data->send_cmd(host, command, true);
-		WARN_ONCE(column != -1 || page_addr != -1,
-			  "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
-			  command, column, page_addr);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		break;
-
-	case NAND_CMD_READID:
-		host->devtype_data->send_cmd(host, command, true);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		host->devtype_data->send_read_id(host);
-		host->buf_start = 0;
-		break;
-
-	case NAND_CMD_ERASE1:
-	case NAND_CMD_ERASE2:
-		host->devtype_data->send_cmd(host, command, false);
-		WARN_ONCE(column != -1,
-			  "Unexpected column value (cmd=%u, col=%d)\n",
-			  command, column);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-
-		break;
-	case NAND_CMD_PARAM:
-		host->devtype_data->send_cmd(host, command, false);
-		mxc_do_addr_cycle(mtd, column, page_addr);
-		host->devtype_data->send_page(mtd, NFC_OUTPUT);
-		memcpy32_fromio(host->data_buf, host->main_area0, 512);
-		host->buf_start = 0;
-		break;
-	default:
-		WARN_ONCE(1, "Unimplemented command (cmd=%u)\n",
-			  command);
-		break;
-	}
-}
-
-static int mxc_nand_set_features(struct nand_chip *chip, int addr,
-				 u8 *subfeature_param)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	int i;
-
-	host->buf_start = 0;
-
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		chip->legacy.write_byte(chip, subfeature_param[i]);
-
-	memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
-	host->devtype_data->send_cmd(host, NAND_CMD_SET_FEATURES, false);
-	mxc_do_addr_cycle(mtd, addr, -1);
-	host->devtype_data->send_page(mtd, NFC_INPUT);
-
-	return 0;
-}
-
-static int mxc_nand_get_features(struct nand_chip *chip, int addr,
-				 u8 *subfeature_param)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct mxc_nand_host *host = nand_get_controller_data(chip);
-	int i;
-
-	host->devtype_data->send_cmd(host, NAND_CMD_GET_FEATURES, false);
-	mxc_do_addr_cycle(mtd, addr, -1);
-	host->devtype_data->send_page(mtd, NFC_OUTPUT);
-	memcpy32_fromio(host->data_buf, host->main_area0, 512);
-	host->buf_start = 0;
-
-	for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
-		*subfeature_param++ = chip->legacy.read_byte(chip);
-
-	return 0;
-}
-
 /*
  * The generic flash bbt descriptors overlap with our ecc
  * hardware, so define some i.MX specific ones.
@@ -1670,9 +1415,109 @@ static int mxcnd_setup_interface(struct nand_chip *chip, int chipnr,
 	return host->devtype_data->setup_interface(chip, chipnr, conf);
 }
 
+static int mxcnd_exec_op(struct nand_chip *chip,
+			 const struct nand_operation *op,
+			 bool check_only)
+{
+	struct mxc_nand_host *host = nand_get_controller_data(chip);
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	int i, j, buf_len;
+	void *buf_read = NULL;
+	const void *buf_write = NULL;
+	const struct nand_op_instr *instr;
+	bool readid = false;
+	bool statusreq = false;
+
+	dev_dbg(host->dev, "%s: %d instructions\n", __func__, op->ninstrs);
+
+	for (i = 0; i < op->ninstrs; i++) {
+		instr = &op->instrs[i];
+
+		nand_op_trace("  ", instr);
+
+		switch (instr->type) {
+		case NAND_OP_WAITRDY_INSTR:
+			/*
+			 * NFC handles R/B internally. Therefore, this function
+			 * always returns status as ready.
+			 */
+			break;
+		case NAND_OP_CMD_INSTR:
+			host->devtype_data->send_cmd(host, instr->ctx.cmd.opcode, true);
+
+			if (instr->ctx.cmd.opcode == NAND_CMD_READID)
+				readid = true;
+			if (instr->ctx.cmd.opcode == NAND_CMD_STATUS)
+				statusreq = true;
+
+			break;
+		case NAND_OP_ADDR_INSTR:
+			for (j = 0; j < instr->ctx.addr.naddrs; j++) {
+				bool islast = j == instr->ctx.addr.naddrs - 1;
+				host->devtype_data->send_addr(host, instr->ctx.addr.addrs[j], islast);
+			}
+			break;
+		case NAND_OP_DATA_OUT_INSTR:
+			buf_write = instr->ctx.data.buf.out;
+			buf_len = instr->ctx.data.len;
+
+			memcpy32_toio(host->main_area0, buf_write, buf_len);
+			copy_spare(mtd, false, chip->oob_poi);
+
+			host->devtype_data->send_page(mtd, NFC_INPUT);
+
+			break;
+		case NAND_OP_DATA_IN_INSTR:
+
+			buf_read = instr->ctx.data.buf.in;
+			buf_len = instr->ctx.data.len;
+
+			if (!buf_len)
+				break;
+
+			if (readid) {
+				host->devtype_data->send_read_id(host);
+				readid = false;
+
+				memcpy32_fromio(host->data_buf, host->main_area0, buf_len * 2);
+
+				if (chip->options & NAND_BUSWIDTH_16) {
+					u8 *bufr = buf_read;
+					u16 *bufw = host->data_buf;
+					for (j = 0; j < buf_len; j++)
+						bufr[j] = bufw[j];
+				} else {
+					memcpy(buf_read, host->data_buf, buf_len);
+				}
+				break;
+			}
+
+			if (statusreq) {
+				*(u8*)buf_read = host->devtype_data->get_dev_status(host);
+				statusreq = false;
+				break;
+			}
+
+			host->devtype_data->read_page(chip);
+
+			if (IS_ALIGNED(buf_len, 4)) {
+				memcpy32_fromio(buf_read, host->main_area0, buf_len);
+			} else {
+				memcpy32_fromio(host->data_buf, host->main_area0, mtd->writesize);
+				memcpy(buf_read, host->data_buf, buf_len);
+			}
+
+			break;
+		}
+	}
+
+	return 0;
+}
+
 static const struct nand_controller_ops mxcnd_controller_ops = {
 	.attach_chip = mxcnd_attach_chip,
 	.setup_interface = mxcnd_setup_interface,
+	.exec_op = mxcnd_exec_op,
 };
 
 /*
@@ -1812,13 +1657,6 @@ static int mxcnd_probe(struct device *dev)
 
 	nand_set_controller_data(this, host);
 	nand_set_flash_node(this, dev->of_node);
-	this->legacy.dev_ready = mxc_nand_dev_ready;
-	this->legacy.cmdfunc = mxc_nand_command;
-	this->legacy.read_byte = mxc_nand_read_byte;
-	this->legacy.write_buf = mxc_nand_write_buf;
-	this->legacy.read_buf = mxc_nand_read_buf;
-	this->legacy.set_features = mxc_nand_set_features;
-	this->legacy.get_features = mxc_nand_get_features;
 
 	host->clk = clk_get(dev, NULL);
 	if (IS_ERR(host->clk))
-- 
2.39.2




  parent reply	other threads:[~2024-04-16  9:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-16  9:53 [PATCH 0/8] Update NAND layer Sascha Hauer
2024-04-16  9:53 ` [PATCH 1/8] bch: update from Kernel Sascha Hauer
2024-04-16  9:53 ` [PATCH 2/8] mtd: nand: move to drivers/mtd/nand/raw/ Sascha Hauer
2024-04-16  9:53 ` [PATCH 3/8] mtd: update _lock/_unlock prototype Sascha Hauer
2024-04-16  9:53 ` [PATCH 4/8] mtd: nand: update to Linux-6.9-rc2 Sascha Hauer
2024-04-16  9:53 ` [PATCH 5/8] mtd: nand: replace nand_imx driver with kernel driver Sascha Hauer
2024-04-16  9:53 ` [PATCH 6/8] mtd: nand: mxc_nand: separate page read from ecc calc Sascha Hauer
2024-04-16  9:53 ` Sascha Hauer [this message]
2024-04-16  9:53 ` [PATCH 8/8] mtd: nand: mxc_nand: support software ECC Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240416095313.1977242-8-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox