From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH master 2/2] ARM: fix overlap between ramoops area and early malloc area
Date: Fri, 17 May 2024 08:10:57 +0200 [thread overview]
Message-ID: <20240517061057.3299857-2-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20240517061057.3299857-1-a.fatoum@pengutronix.de>
ramoops is usually a few megabytes and the early malloc area is just
128K, so the effect of this overlap was likely limited, but depending on
size of the data stored to pstore, this could still lead to problems.
Avoid this by locating the early malloc area before the barebox binary.
That way that space is reclaimed in barebox proper for the non-early
malloc region.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/arm/cpu/uncompress.c | 4 ++--
arch/arm/include/asm/barebox-arm.h | 24 +++++++++---------------
2 files changed, 11 insertions(+), 17 deletions(-)
diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
index aa1a49bfc96a..612a5b65ff4c 100644
--- a/arch/arm/cpu/uncompress.c
+++ b/arch/arm/cpu/uncompress.c
@@ -66,8 +66,8 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize,
if (IS_ENABLED(CONFIG_MMU))
mmu_early_enable(membase, memsize);
- free_mem_ptr = arm_mem_early_malloc(endmem);
- free_mem_end_ptr = arm_mem_early_malloc_end(endmem);
+ free_mem_ptr = barebox_base - ARM_MEM_EARLY_MALLOC_SIZE;
+ free_mem_end_ptr = barebox_base;
pr_debug("uncompressing barebox binary at 0x%p (size 0x%08x) to 0x%08lx (uncompressed size: 0x%08x)\n",
pg_start, pg_len, barebox_base, uncompressed_len);
diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
index 30834233fb96..c64e74f8f03a 100644
--- a/arch/arm/include/asm/barebox-arm.h
+++ b/arch/arm/include/asm/barebox-arm.h
@@ -73,12 +73,10 @@ void *barebox_arm_boot_dtb(void);
* ↑
* ARM_EARLY_PAGETABLE_SIZE
* ↓
- * ------------ arm_mem_ttb() / arm_mem_early_malloc_end() ------------
- * ↑ ↑
- * CONFIG_FS_PSTORE_RAMOOPS_SIZE SZ_128K
- * (depends on FS_PSTORE_RAMOOPS) |
- * | ↓
- * | ------ arm_mem_early_malloc() ---
+ * --------------------------- arm_mem_ttb() -------------------------
+ * ↑
+ * CONFIG_FS_PSTORE_RAMOOPS_SIZE
+ * (depends on FS_PSTORE_RAMOOPS)
* ↓
* ------------------------- arm_mem_ramoops() ------------------------
* ↑
@@ -86,6 +84,10 @@ void *barebox_arm_boot_dtb(void);
* + BSS) rounded to SZ_1M
* ↓
* ---------------------- arm_mem_barebox_image() ---------------------
+ * ↑
+ * SZ_128K
+ * ↓
+ * ------------------------ arm_mem_early_malloc ----------------------
*/
static inline unsigned long arm_mem_optee(unsigned long endmem)
@@ -121,15 +123,7 @@ static inline unsigned long arm_mem_ttb(unsigned long endmem)
return endmem;
}
-static inline unsigned long arm_mem_early_malloc(unsigned long endmem)
-{
- return arm_mem_ttb(endmem) - SZ_128K;
-}
-
-static inline unsigned long arm_mem_early_malloc_end(unsigned long endmem)
-{
- return arm_mem_ttb(endmem);
-}
+#define ARM_MEM_EARLY_MALLOC_SIZE SZ_128K
static inline unsigned long arm_mem_ramoops(unsigned long endmem)
{
--
2.39.2
next prev parent reply other threads:[~2024-05-17 6:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-17 6:10 [PATCH master 1/2] ARM: document PBL barebox memory layout Ahmad Fatoum
2024-05-17 6:10 ` Ahmad Fatoum [this message]
2024-05-21 7:13 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240517061057.3299857-2-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox