From: Stefan Kerkmann <s.kerkmann@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
BAREBOX <barebox@lists.infradead.org>
Cc: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Subject: [PATCH 3/3] net: phy: dp83867: sync dp83867_phy_rest
Date: Thu, 23 May 2024 16:40:30 +0200 [thread overview]
Message-ID: <20240523-feature-dp83867-soft-reset-v1-3-428d15168dfe@pengutronix.de> (raw)
In-Reply-To: <20240523-feature-dp83867-soft-reset-v1-0-428d15168dfe@pengutronix.de>
This is a port of the `dp83867_phy_reset` function at the state of linux
commit a129b41fe0a8b4da828c46b10f5244ca07a3fec3 ("Revert "net: phy:
dp83867: perform soft reset and retain established link"). Which
performs a reset before starting the initial configuration.
It is a refactoring of commit 095cd32961aab64cfe72941ce43d99876852e12b
("net: phy: dp83867: reset PHY on probe") which already ported parts of
the function, but diverted from the upstream implementation.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
---
drivers/net/phy/dp83867.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index aefc651489..3c9a8e6355 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -362,8 +362,6 @@ static int dp83867_of_init(struct phy_device *phydev)
return 0;
}
-static int dp83867_phy_reset(struct phy_device *phydev); /* see below */
-
static int dp83867_probe(struct phy_device *phydev)
{
struct dp83867_private *dp83867;
@@ -372,8 +370,6 @@ static int dp83867_probe(struct phy_device *phydev)
phydev->priv = dp83867;
- dp83867_phy_reset(phydev);
-
return dp83867_of_init(phydev);
}
@@ -571,14 +567,33 @@ static int dp83867_phy_reset(struct phy_device *phydev)
{
int err;
+ err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESET);
+ if (err < 0)
+ return err;
+
+ udelay(20);
+
+ err = phy_modify(phydev, MII_DP83867_PHYCTRL,
+ DP83867_PHYCR_FORCE_LINK_GOOD, 0);
+ if (err < 0)
+ return err;
+
+ /* Configure the DSP Feedforward Equalizer Configuration register to
+ * improve short cable (< 1 meter) performance. This will not affect
+ * long cable performance.
+ */
+ err = phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_DSP_FFE_CFG,
+ 0x0e81);
+ if (err < 0)
+ return err;
+
err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART);
if (err < 0)
return err;
udelay(20);
- return phy_modify(phydev, MII_DP83867_PHYCTRL,
- DP83867_PHYCR_FORCE_LINK_GOOD, 0);
+ return 0;
}
static struct phy_driver dp83867_driver[] = {
@@ -590,6 +605,7 @@ static struct phy_driver dp83867_driver[] = {
.probe = dp83867_probe,
.config_init = dp83867_config_init,
+ .soft_reset = dp83867_phy_reset,
.read_status = dp83867_read_status,
},
--
2.39.2
next prev parent reply other threads:[~2024-05-23 14:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-23 14:40 [PATCH 0/3] net: phy: dp83867: sync dp83867_phy_reset Stefan Kerkmann
2024-05-23 14:40 ` [PATCH 1/3] net: phy: allow PHY drivers to implement their own software reset Stefan Kerkmann
2024-05-23 14:46 ` Ahmad Fatoum
2024-05-23 14:40 ` [PATCH 2/3] net: phy: document core PHY structures Stefan Kerkmann
2024-05-23 14:47 ` Ahmad Fatoum
2024-05-23 14:40 ` Stefan Kerkmann [this message]
2024-05-23 14:49 ` [PATCH 3/3] net: phy: dp83867: sync dp83867_phy_rest Ahmad Fatoum
2024-05-24 9:15 ` [PATCH 0/3] net: phy: dp83867: sync dp83867_phy_reset Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523-feature-dp83867-soft-reset-v1-3-428d15168dfe@pengutronix.de \
--to=s.kerkmann@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox