From: Andreas Helmcke <ahelmcke@ela-soft.com>
To: barebox@lists.infradead.org
Cc: Andreas Helmcke <ahelmcke@ela-soft.com>
Subject: [PATCH] nandtest: fix wrong ecc stats and start offset parameter
Date: Tue, 4 Jun 2024 12:39:30 +0200 [thread overview]
Message-ID: <20240604103930.83268-1-ahelmcke@ela-soft.com> (raw)
- The -o (start offset on flash) parameter has no effect. The check always
starts at address 0, despite the value given with -o.
- Due to an invalid initialization the ecc error stats sometimes showed invalid values.
Signed-off-by: Andreas Helmcke <ahelmcke@ela-soft.com>
---
commands/nandtest.c | 62 ++++++++++++++++++++++++++++++---------------
1 file changed, 42 insertions(+), 20 deletions(-)
mode change 100644 => 100755 commands/nandtest.c
diff --git a/commands/nandtest.c b/commands/nandtest.c
old mode 100644
new mode 100755
index 4a7db9cc74..c2eed15c50
--- a/commands/nandtest.c
+++ b/commands/nandtest.c
@@ -34,11 +34,32 @@ static unsigned int ecc_stats[MAX_ECC_BITS];
static unsigned int ecc_stats_over;
static unsigned int ecc_failed_cnt;
+/* Helper for progression bar */
+static loff_t pb_len;
+static loff_t pb_start;
+
+static void pb_init(void)
+{
+ init_progression_bar(pb_len);
+}
+
+static void pb_update(const loff_t done)
+{
+ show_progress(done - pb_start);
+}
+
+static void pb_rewrite(const loff_t done)
+{
+ pb_init();
+ pb_update(done);
+}
+
+
/*
* Implementation of pwrite with lseek and write.
*/
static ssize_t __pwrite(int fd, const void *buf,
- size_t count, loff_t offset, loff_t length)
+ size_t count, loff_t offset)
{
ssize_t ret;
@@ -50,8 +71,7 @@ static ssize_t __pwrite(int fd, const void *buf,
printf("\nMark block bad at 0x%08llx\n",
offset + memregion.offset);
ioctl(fd, MEMSETBADBLOCK, &offset);
- init_progression_bar(length);
- show_progress(offset);
+ pb_rewrite(offset);
}
}
@@ -59,7 +79,7 @@ static ssize_t __pwrite(int fd, const void *buf,
return ret;
}
-static int _read_get_stats(loff_t ofs, unsigned char *buf, loff_t totallength)
+static int _read_get_stats(loff_t ofs, unsigned char *buf)
{
int ret;
@@ -76,8 +96,7 @@ static int _read_get_stats(loff_t ofs, unsigned char *buf, loff_t totallength)
printf("\n %d bit(s) ECC corrected at page 0x%08llx\n",
newstats.corrected - oldstats.corrected,
ofs + memregion.offset);
- init_progression_bar(totallength);
- show_progress(ofs);
+ pb_rewrite(ofs);
if ((newstats.corrected-oldstats.corrected) >=
MAX_ECC_BITS) {
/* Increment ECC stats that
@@ -95,8 +114,7 @@ static int _read_get_stats(loff_t ofs, unsigned char *buf, loff_t totallength)
if (newstats.failed > oldstats.failed) {
printf("\nECC failed at page 0x%08llx\n",
ofs + memregion.offset);
- init_progression_bar(totallength);
- show_progress(ofs);
+ pb_rewrite(ofs);
oldstats.failed = newstats.failed;
ecc_failed_cnt++;
}
@@ -117,7 +135,7 @@ static int read_corrected(loff_t ofs, unsigned char *rbuf, loff_t length)
for (i = 0; i < meminfo.erasesize;
i += meminfo.writesize) {
- ret = _read_get_stats(ofs + i, rbuf + i, length);
+ ret = _read_get_stats(ofs + i, rbuf + i);
if (ret)
return ret;
}
@@ -154,9 +172,9 @@ static int erase_and_write(loff_t ofs, unsigned char *data,
i += meminfo.writesize) {
/* Write data to given offset */
__pwrite(fd, data + i, meminfo.writesize,
- ofs + i, length);
+ ofs + i);
- ret = _read_get_stats(ofs + i, rbuf + i, length);
+ ret = _read_get_stats(ofs + i, rbuf + i);
if (ret)
return ret;
}
@@ -201,7 +219,7 @@ static void print_stats(int nr_passes, loff_t length)
static int do_nandtest(int argc, char *argv[])
{
int opt, do_nandtest_dev = -1, do_nandtest_ro = 0, ret = -1;
- loff_t flash_offset = 0, test_ofs, length = 0;
+ loff_t flash_offset = 0, test_ofs, length = 0, flash_end = 0;
unsigned int nr_iterations = 1, iter;
unsigned char *wbuf, *rbuf;
@@ -210,7 +228,7 @@ static int do_nandtest(int argc, char *argv[])
markbad = 0;
fd = -1;
- memset(ecc_stats, 0, sizeof(*ecc_stats));
+ memset(ecc_stats, 0, sizeof(ecc_stats));
while ((opt = getopt(argc, argv, "ms:i:o:l:tr")) > 0) {
switch (opt) {
@@ -315,6 +333,8 @@ static int do_nandtest(int argc, char *argv[])
goto err;
}
+ flash_end = length + flash_offset;
+
wbuf = malloc(meminfo.erasesize * 2);
if (!wbuf) {
printf("Could not allocate %d bytes for buffer\n",
@@ -323,20 +343,22 @@ static int do_nandtest(int argc, char *argv[])
}
rbuf = wbuf + meminfo.erasesize;
+ pb_start = flash_offset;
+ pb_len = length;
+
for (iter = 0; iter < nr_iterations; iter++) {
- init_progression_bar(length);
- for (test_ofs = 0;
- test_ofs < length;
+ pb_init();
+ for (test_ofs = flash_offset;
+ test_ofs < flash_end;
test_ofs += meminfo.erasesize) {
- show_progress(test_ofs);
+ pb_update(test_ofs);
srand(seed);
seed = rand();
if (ioctl(fd, MEMGETBADBLOCK, &test_ofs)) {
printf("\nBad block at 0x%08llx\n",
test_ofs + memregion.offset);
- init_progression_bar(length);
- show_progress(test_ofs);
+ pb_rewrite(test_ofs);
continue;
}
if (do_nandtest_ro) {
@@ -349,7 +371,7 @@ static int do_nandtest(int argc, char *argv[])
if (ret < 0)
goto err2;
}
- show_progress(test_ofs);
+ pb_update(test_ofs);
printf("\nFinished pass %d successfully\n", iter + 1);
}
--
2.43.0
next reply other threads:[~2024-06-04 10:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 10:39 Andreas Helmcke [this message]
2024-06-10 12:42 ` Sascha Hauer
2024-06-10 12:43 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604103930.83268-1-ahelmcke@ela-soft.com \
--to=ahelmcke@ela-soft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox