[PATCH v1 1/2] arm: boards: Add support for Protonic MECIO1 board

[PATCH v1 1/2] arm: boards: Add support for Protonic MECIO1 board

[Oleksij Rempel]

From: David Jander <david@protonic.nl>

Signed-off-by: David Jander <david@protonic.nl>
---
 arch/arm/boards/protonic-stm32mp1/board.c    |   5 +
 arch/arm/boards/protonic-stm32mp1/lowlevel.c |  15 ++
 arch/arm/dts/Makefile                        |   3 +-
 arch/arm/dts/stm32mp151-mecio1.dts           | 214 +++++++++++++++++++
 arch/arm/mach-stm32mp/Kconfig                |   6 +-
 images/Makefile.stm32mp                      |   1 +
 6 files changed, 240 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/stm32mp151-mecio1.dts

diff --git a/arch/arm/boards/protonic-stm32mp1/board.c b/arch/arm/boards/protonic-stm32mp1/board.c
index 68297debab..e8f47c6849 100644
--- a/arch/arm/boards/protonic-stm32mp1/board.c
+++ b/arch/arm/boards/protonic-stm32mp1/board.c
@@ -113,10 +113,15 @@ static const struct prt_stm32_machine_data prt_stm32_prtt1c = {
 	.flags = PRT_STM32_BOOTSRC_SD | PRT_STM32_BOOTSRC_EMMC,
 };
 
+static const struct prt_stm32_machine_data prt_stm32_mecio1 = {
+	.flags = PRT_STM32_BOOTSRC_SPI_NOR,
+};
+
 static const struct of_device_id prt_stm32_of_match[] = {
 	{ .compatible = "prt,prtt1a", .data = &prt_stm32_prtt1a },
 	{ .compatible = "prt,prtt1c", .data = &prt_stm32_prtt1c },
 	{ .compatible = "prt,prtt1s", .data = &prt_stm32_prtt1a },
+	{ .compatible = "prt,mecio1", .data = &prt_stm32_mecio1 },
 	{ /* sentinel */ },
 };
 BAREBOX_DEEP_PROBE_ENABLE(prt_stm32_of_match);
diff --git a/arch/arm/boards/protonic-stm32mp1/lowlevel.c b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
index 2fd7f8ba8b..97d60b6ea4 100644
--- a/arch/arm/boards/protonic-stm32mp1/lowlevel.c
+++ b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
@@ -8,6 +8,7 @@
 extern char __dtb_z_stm32mp151_prtt1a_start[];
 extern char __dtb_z_stm32mp151_prtt1c_start[];
 extern char __dtb_z_stm32mp151_prtt1s_start[];
+extern char __dtb_z_stm32mp151_mecio1_start[];
 
 static void setup_uart(void)
 {
@@ -56,3 +57,17 @@ ENTRY_FUNCTION(start_prtt1s, r0, r1, r2)
 
 	stm32mp1_barebox_entry(fdt);
 }
+
+ENTRY_FUNCTION(start_mecio1, r0, r1, r2)
+{
+	void *fdt;
+
+	stm32mp_cpu_lowlevel_init();
+
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		setup_uart();
+
+	fdt = __dtb_z_stm32mp151_mecio1_start + get_runtime_offset();
+
+	stm32mp1_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 40d61ce8db..37158ce0df 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -111,7 +111,8 @@ lwl-$(CONFIG_MACH_PROTONIC_MECSBC) += rk3568-mecsbc.dtb.o
 lwl-$(CONFIG_MACH_PROTONIC_STM32MP1) += \
 	stm32mp151-prtt1a.dtb.o \
 	stm32mp151-prtt1c.dtb.o \
-	stm32mp151-prtt1s.dtb.o
+	stm32mp151-prtt1s.dtb.o \
+	stm32mp151-mecio1.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK3) += rk3568-rock-3a.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK5) += rk3588-rock-5b.dtb.o
diff --git a/arch/arm/dts/stm32mp151-mecio1.dts b/arch/arm/dts/stm32mp151-mecio1.dts
new file mode 100644
index 0000000000..6b50bdd4ef
--- /dev/null
+++ b/arch/arm/dts/stm32mp151-mecio1.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "arm/st/stm32mp151.dtsi"
+#include "arm/st/stm32mp15xc.dtsi"
+#include "arm/st/stm32mp15-pinctrl.dtsi"
+#include "arm/st/stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Protonic MECIO1";
+	compatible = "prt,mecio1", "st,stm32mp151";
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+	};
+
+	v3v3: fixed-regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v: fixed-regulator-v5v {
+		compatible = "regulator-fixed";
+		regulator-name = "v5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "debug:red";
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "debug:green";
+			gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&clk_lse {
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&qspi_bk1_pins_a {
+	pins1 {
+		bias-pull-up;
+		drive-push-pull;
+		slew-rate = <1>;
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_x>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_x>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>;
+	assigned-clock-parents = <&rcc PLL3_Q>;
+	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
+	st,eth-clk-sel;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@8 {
+			reg = <8>;
+			interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <35>;
+		};
+	};
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&v5v>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port1 {
+	phy-supply = <&v3v3>;
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart4_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+		bias-disable;
+		drive-push-pull;
+		slew-rate = <0>;
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+		bias-pull-up;
+	};
+};
+
+&pinctrl {
+	ethernet0_rgmii_pins_x: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index 524d282a1d..d9db74a576 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -43,10 +43,10 @@ config MACH_STM32MP15X_EV1
 
 config MACH_PROTONIC_STM32MP1
 	select ARCH_STM32MP157
-	bool "Protonic PRTT1L family of boards"
+	bool "Protonic PRTT1L/MECIOx family of boards"
 	help
-	  Builds all barebox-prtt1*.stm32 that can be deployed as SSBL
-	  on the respective PRTT1L family board
+	  Builds all barebox-*.stm32 that can be deployed as SSBL
+	  on the respective PRTT1L/MECIOx family board
 
 config MACH_PHYTEC_PHYCORE_STM32MP1
 	select ARCH_STM32MP157
diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
index cc70aee923..663c08a741 100644
--- a/images/Makefile.stm32mp
+++ b/images/Makefile.stm32mp
@@ -38,6 +38,7 @@ $(call build_stm32mp_image, CONFIG_MACH_LXA_MC1, start_stm32mp157c_lxa_mc1, stm3
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1a, prtt1a)
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1s, prtt1s)
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1c, prtt1c)
+$(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_mecio1, mecio1)
 
 $(call build_stm32mp_image, CONFIG_MACH_SEEED_ODYSSEY, start_stm32mp157c_seeed_odyssey, stm32mp157c-seeed-odyssey)
 
-- 
2.39.2

[PATCH v1 2/2] arm: boards: Add support for Protonic MECT1S board

[Oleksij Rempel]

From: David Jander <david@protonic.nl>

Signed-off-by: David Jander <david@protonic.nl>
---
 arch/arm/boards/protonic-stm32mp1/board.c    |   5 +
 arch/arm/boards/protonic-stm32mp1/lowlevel.c |  15 +
 arch/arm/dts/Makefile                        |   3 +-
 arch/arm/dts/stm32mp151-mect1s.dts           | 322 +++++++++++++++++++
 arch/arm/mach-stm32mp/Kconfig                |   4 +-
 images/Makefile.stm32mp                      |   1 +
 6 files changed, 347 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/stm32mp151-mect1s.dts

diff --git a/arch/arm/boards/protonic-stm32mp1/board.c b/arch/arm/boards/protonic-stm32mp1/board.c
index e8f47c6849..a919de36c2 100644
--- a/arch/arm/boards/protonic-stm32mp1/board.c
+++ b/arch/arm/boards/protonic-stm32mp1/board.c
@@ -117,11 +117,16 @@ static const struct prt_stm32_machine_data prt_stm32_mecio1 = {
 	.flags = PRT_STM32_BOOTSRC_SPI_NOR,
 };
 
+static const struct prt_stm32_machine_data prt_stm32_mect1s = {
+	.flags = PRT_STM32_BOOTSRC_SPI_NOR,
+};
+
 static const struct of_device_id prt_stm32_of_match[] = {
 	{ .compatible = "prt,prtt1a", .data = &prt_stm32_prtt1a },
 	{ .compatible = "prt,prtt1c", .data = &prt_stm32_prtt1c },
 	{ .compatible = "prt,prtt1s", .data = &prt_stm32_prtt1a },
 	{ .compatible = "prt,mecio1", .data = &prt_stm32_mecio1 },
+	{ .compatible = "prt,mect1s", .data = &prt_stm32_mect1s },
 	{ /* sentinel */ },
 };
 BAREBOX_DEEP_PROBE_ENABLE(prt_stm32_of_match);
diff --git a/arch/arm/boards/protonic-stm32mp1/lowlevel.c b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
index 97d60b6ea4..2afa931126 100644
--- a/arch/arm/boards/protonic-stm32mp1/lowlevel.c
+++ b/arch/arm/boards/protonic-stm32mp1/lowlevel.c
@@ -9,6 +9,7 @@ extern char __dtb_z_stm32mp151_prtt1a_start[];
 extern char __dtb_z_stm32mp151_prtt1c_start[];
 extern char __dtb_z_stm32mp151_prtt1s_start[];
 extern char __dtb_z_stm32mp151_mecio1_start[];
+extern char __dtb_z_stm32mp151_mect1s_start[];
 
 static void setup_uart(void)
 {
@@ -71,3 +72,17 @@ ENTRY_FUNCTION(start_mecio1, r0, r1, r2)
 
 	stm32mp1_barebox_entry(fdt);
 }
+
+ENTRY_FUNCTION(start_mect1s, r0, r1, r2)
+{
+	void *fdt;
+
+	stm32mp_cpu_lowlevel_init();
+
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		setup_uart();
+
+	fdt = __dtb_z_stm32mp151_mect1s_start + get_runtime_offset();
+
+	stm32mp1_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 37158ce0df..68585e1e4b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -112,7 +112,8 @@ lwl-$(CONFIG_MACH_PROTONIC_STM32MP1) += \
 	stm32mp151-prtt1a.dtb.o \
 	stm32mp151-prtt1c.dtb.o \
 	stm32mp151-prtt1s.dtb.o \
-	stm32mp151-mecio1.dtb.o
+	stm32mp151-mecio1.dtb.o \
+	stm32mp151-mect1s.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK3) += rk3568-rock-3a.dtb.o
 lwl-$(CONFIG_MACH_RADXA_ROCK5) += rk3588-rock-5b.dtb.o
diff --git a/arch/arm/dts/stm32mp151-mect1s.dts b/arch/arm/dts/stm32mp151-mect1s.dts
new file mode 100644
index 0000000000..4d0e31d189
--- /dev/null
+++ b/arch/arm/dts/stm32mp151-mect1s.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "arm/st/stm32mp151.dtsi"
+#include "arm/st/stm32mp15xc.dtsi"
+#include "arm/st/stm32mp15-pinctrl.dtsi"
+#include "arm/st/stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "stm32mp151.dtsi"
+
+/ {
+	model = "Protonic MECT1S";
+	compatible = "prt,mect1s", "st,stm32mp151";
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+	};
+
+	v3v3: fixed-regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	v5v: fixed-regulator-v5v {
+		compatible = "regulator-fixed";
+		regulator-name = "v5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	clock_sja1105: clock-sja1105 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "debug:red";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			label = "debug:green";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	spi_gpio: spi-gpio-0 {
+		compatible = "spi-gpio";
+		gpio-sck = <&gpioi 1 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpioi 3 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpioi 2 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <24000000>;
+};
+
+&clk_lse {
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&qspi_bk1_pins_a {
+	pins1 {
+		bias-pull-up;
+		drive-push-pull;
+		slew-rate = <1>;
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_x>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_x>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	st,eth-clk-sel;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
+&mdio0 {
+	/* All this DP83TG720R PHYs can't be probed before switch@0 is
+	 * probed so we need to use compatible with PHYid
+	 */
+	/* TI DP83TG720R */
+	t1_phy0: ethernet-phy@8 {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <8>;
+		interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy1: ethernet-phy@c {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <12>;
+		interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy2: ethernet-phy@4 {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <4>;
+		interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TG720R */
+	t1_phy3: ethernet-phy@d {
+		compatible = "ethernet-phy-id2000.a284";
+		reg = <13>;
+		interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <1000>;
+	};
+};
+
+&spi_gpio {
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <1000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		reset-gpios = <&gpioi 0 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clock_sja1105>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "t10";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t11";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t12";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "t13";
+				phy-mode = "rgmii-id";
+				phy-handle = <&t1_phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&ethernet0>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	vbus-supply = <&v5v>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port1 {
+	phy-supply = <&v3v3>;
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&pinctrl {
+	ethernet0_rgmii_pins_x: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('B', 8, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+};
diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
index d9db74a576..5d60c79967 100644
--- a/arch/arm/mach-stm32mp/Kconfig
+++ b/arch/arm/mach-stm32mp/Kconfig
@@ -43,10 +43,10 @@ config MACH_STM32MP15X_EV1
 
 config MACH_PROTONIC_STM32MP1
 	select ARCH_STM32MP157
-	bool "Protonic PRTT1L/MECIOx family of boards"
+	bool "Protonic PRTT1L/MECIOx/MECT1S family of boards"
 	help
 	  Builds all barebox-*.stm32 that can be deployed as SSBL
-	  on the respective PRTT1L/MECIOx family board
+	  on the respective PRTT1L/MECIOx/MECT1S family board
 
 config MACH_PHYTEC_PHYCORE_STM32MP1
 	select ARCH_STM32MP157
diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp
index 663c08a741..cb01eb2555 100644
--- a/images/Makefile.stm32mp
+++ b/images/Makefile.stm32mp
@@ -39,6 +39,7 @@ $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1a, prtt1a)
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1s, prtt1s)
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1c, prtt1c)
 $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_mecio1, mecio1)
+$(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_mect1s, mect1s)
 
 $(call build_stm32mp_image, CONFIG_MACH_SEEED_ODYSSEY, start_stm32mp157c_seeed_odyssey, stm32mp157c-seeed-odyssey)
 
-- 
2.39.2

Re: [PATCH v1 1/2] arm: boards: Add support for Protonic MECIO1 board

[Sascha Hauer]

On Wed, 12 Jun 2024 15:05:08 +0200, Oleksij Rempel wrote:
> 


Applied, thanks!

[1/2] arm: boards: Add support for Protonic MECIO1 board
      https://git.pengutronix.de/cgit/barebox/commit/?id=979f8397a217 (link may not be stable)
[2/2] arm: boards: Add support for Protonic MECT1S board
      https://git.pengutronix.de/cgit/barebox/commit/?id=b9254aa9f983 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer@pengutronix.de>