[PATCH v2 07/11] of: overlay: add FIT overlay support

[Marco Felsch <m.felsch@pengutronix.de>]

This adds the support to load devicetree overlays from an FIT image.
There are quite a few options to handle FIT overlays since the FIT
overlay spec is not very strict.

This patch implement the most configurable case where each overlay does
have it's own config node (including the optional signature).

- The "name" filter check is performed on the config-node name (the node
  under the configurations) and not the FIT overlay image name (the node
  name under the images node).
- The "content" filter check does not differ from the file based overlay
  handling.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
 drivers/of/overlay.c | 117 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 110 insertions(+), 7 deletions(-)

diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 156f0f07c878..941cd3d51883 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -8,10 +8,13 @@
  */
 #define pr_fmt(fmt) "of_overlay: " fmt
 
+#include <bootm.h>
 #include <common.h>
 #include <of.h>
 #include <errno.h>
+#include <filetype.h>
 #include <globalvar.h>
+#include <image-fit.h>
 #include <magicvar.h>
 #include <string.h>
 #include <libfile.h>
@@ -471,9 +474,109 @@ static int of_overlay_global_fixup_dir(struct device_node *root, const char *ovl
 	return ret;
 }
 
+static int of_overlay_apply_fit(struct device_node *root, struct fit_handle *fit,
+				struct device_node *config)
+{
+	const char *name = config->name;
+	struct device_node *overlay;
+	unsigned long ovl_sz;
+	const void *ovl;
+	int ret;
+
+	if (!fit_has_image(fit, config, "fdt"))
+		return 0;
+
+	if (!of_overlay_matches_filter(name, NULL))
+		return 0;
+
+	ret = fit_open_image(fit, config, "fdt", &ovl, &ovl_sz);
+	if (ret)
+		return ret;
+
+	overlay = of_unflatten_dtb(ovl, ovl_sz);
+
+	if (!of_overlay_matches_filter(NULL, overlay)) {
+		ret = 0;
+		goto out;
+	}
+
+	ret = of_overlay_apply_tree(root, overlay);
+	if (ret == -ENODEV)
+		pr_debug("Not applied %s (not compatible)\n", name);
+	else if (ret)
+		pr_err("Cannot apply %s: %s\n", name, strerror(-ret));
+	else
+		pr_info("Applied %s\n", name);
+
+out:
+	of_delete_node(overlay);
+
+	return ret;
+}
+
+static int of_overlay_global_fixup_fit(struct device_node *root,
+				       const char *fit_path, loff_t fit_size)
+{
+	enum bootm_verify verify = bootm_get_verify_mode();
+	struct device_node *conf_node;
+	struct fit_handle *fit;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_FITIMAGE))
+		return 0;
+
+	fit = fit_open(fit_path, 0, verify, fit_size);
+	if (IS_ERR(fit)) {
+		pr_err("Loading FIT image %s failed with: %pe\n", fit_path, fit);
+		return PTR_ERR(fit);
+	}
+
+	for_each_child_of_node(fit->configurations, conf_node) {
+		if (!fit_config_is_overlay(conf_node))
+			continue;
+
+		ret = fit_config_verify_signature(fit, conf_node);
+		if (ret)
+			goto out;
+
+		ret = of_overlay_apply_fit(root, fit, conf_node);
+		if (ret)
+			goto out;
+	}
+
+out:
+	fit_close(fit);
+	return ret;
+}
+
 static int of_overlay_global_fixup(struct device_node *root, void *data)
 {
-	return of_overlay_global_fixup_dir(root, of_overlay_path);
+	enum filetype type;
+	struct stat s;
+	int ret;
+
+	if (isempty(of_overlay_path))
+		return 0;
+
+	if (stat(of_overlay_path, &s)) {
+		pr_err("Failed to detect file status\n");
+		return -errno;
+	}
+
+	if (S_ISDIR(s.st_mode))
+		return of_overlay_global_fixup_dir(root, of_overlay_path);
+
+	ret = file_name_detect_type(of_overlay_path, &type);
+	if (ret)
+		return ret;
+
+	if (type == filetype_oftree)
+		return of_overlay_global_fixup_fit(root, of_overlay_path,
+						   s.st_size);
+
+	pr_err("No suitable overlay provider found!\n");
+
+	return -EINVAL;
 }
 
 /**
@@ -498,13 +601,13 @@ int of_overlay_register_filter(struct of_overlay_filter *filter)
 
 /**
  * of_overlay_filter_pattern - A filter that matches on the filename or
- *                                an overlay
+ *			       FIT config-node name of an overlay
  * @f: The filter
- * @pattern: The filename of the overlay
+ * @pattern: The filename or FIT config-node name of the overlay
  *
- * This filter matches when the filename matches one of the patterns given
- * in global.of.overlay.filepattern. global.of.overlay.filepattern shall
- * contain a space separated list of wildcard patterns.
+ * This filter matches when the filename or FIT config-node name matches one of
+ * the patterns given in global.of.overlay.pattern. global.of.overlay.pattern
+ * shall contain a space separated list of wildcard patterns.
  *
  * @return: True when the overlay shall be applied, false otherwise.
  */
@@ -627,7 +730,7 @@ static int of_overlay_init(void)
 device_initcall(of_overlay_init);
 
 BAREBOX_MAGICVAR(global.of.overlay.compatible, "space separated list of compatibles an overlay must match");
-BAREBOX_MAGICVAR(global.of.overlay.pattern, "space separated list of filepatterns an overlay must match");
+BAREBOX_MAGICVAR(global.of.overlay.pattern, "space separated list of filename or fit config-node name patterns an overlay must match");
 BAREBOX_MAGICVAR(global.of.overlay.path, "Path to look for dt overlays");
 BAREBOX_MAGICVAR(global.of.overlay.filter, "space separated list of filters");
 BAREBOX_MAGICVAR(global.of.overlay.fitconfigpattern, "FIT config node name pattern to look for dt overlays");
-- 
2.39.2