From: Marco Felsch <m.felsch@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 5/9] i.MX: HAB: add imx_hab_revoke_key support
Date: Tue, 25 Jun 2024 10:07:20 +0200 [thread overview]
Message-ID: <20240625080720.hxw7b2ntio5vrhba@pengutronix.de> (raw)
In-Reply-To: <ZmwwHwTSqpVuMSOv@pengutronix.de>
On 24-06-14, Sascha Hauer wrote:
> On Thu, Jun 13, 2024 at 03:09:40PM +0200, Marco Felsch wrote:
> > Add an helper to revoke an i.MX SRK key. At the moment the helper
> > supprts i.MX8M devices only, but adding support for other SoCs can be
> > done easily by providing the .revoke_key() hook.
> >
> > Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> > ---
> > drivers/hab/hab.c | 45 ++++++++++++++++++++++++++++++++
> > include/hab.h | 6 +++++
> > include/mach/imx/ocotp-fusemap.h | 1 +
> > 3 files changed, 52 insertions(+)
> >
> > diff --git a/drivers/hab/hab.c b/drivers/hab/hab.c
> > index 28a091841a69..e21a3c3acf81 100644
> > --- a/drivers/hab/hab.c
> > +++ b/drivers/hab/hab.c
> > @@ -231,6 +231,27 @@ static int imx8m_hab_device_locked_down_ocotp(void)
> > return v;
> > }
> >
> > +static int imx8m_hab_revoke_key_ocotp(unsigned key_idx)
> > +{
> > + int ret;
> > +
> > + /* Prohibit revocation of last possible key */
> > + if (key_idx >= 4)
> > + return -EINVAL;
> > +
> > + ret = imx_ocotp_srk_revoke_locked();
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Return -EINVAL in case the SRK_REVOKE write is locked */
> > + if (ret == 1)
> > + return -EINVAL;
> > +
> > + ret = imx_ocotp_write_field(MX8M_OCOTP_SRK_REVOKE, BIT(key_idx));
> > +
> > + return ret;
> > +}
> > +
> > struct imx_hab_ops {
> > int (*write_srk_hash)(const u8 *srk, unsigned flags);
> > int (*read_srk_hash)(u8 *srk);
> > @@ -238,6 +259,7 @@ struct imx_hab_ops {
> > int (*lockdown_device)(unsigned flags);
> > int (*device_locked_down)(void);
> > int (*print_status)(void);
> > + int (*revoke_key)(unsigned key_idx);
> > };
> >
> > static struct imx_hab_ops imx_hab_ops_iim = {
> > @@ -265,6 +287,7 @@ static struct imx_hab_ops imx8m_hab_ops_ocotp = {
> > .device_locked_down = imx8m_hab_device_locked_down_ocotp,
> > .permanent_write_enable = imx_hab_permanent_write_enable_ocotp,
> > .print_status = imx8m_hab_print_status,
> > + .revoke_key = imx8m_hab_revoke_key_ocotp,
> > };
> >
> > static int imx_ahab_write_srk_hash(const u8 *__newsrk, unsigned flags)
> > @@ -536,3 +559,25 @@ static int init_imx_hab_print_status(void)
> > return 0;
> > }
> > postmmu_initcall(init_imx_hab_print_status);
> > +
> > +int imx_hab_revoke_key(unsigned key_idx, unsigned flags)
>
> Are you anticipating more flags? If not, should we better use a boolean
> flag for now?
I followed the actual concept of having separate flags but to answer you
question, no I don't anticipate more flags.
> Otherwise it's not really clear which of the IMX_SRK_* flags is used by
> which function.
I added the documentation above the flag like the previous flags did.
But you're right in the end it is all about permanent write en-/disable
so this could be covered in just one flag.
Regards,
Marco
> Sascha
>
>
> > +{
> > + struct imx_hab_ops *ops = imx_get_hab_ops();
> > + int ret;
> > +
> > + if (!ops || !ops->revoke_key)
> > + return -ENOSYS;
> > +
> > + if (flags & IMX_SRK_REVOKE_KEY_PERMANENT) {
> > + ret = ops->permanent_write_enable(1);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + ret = ops->revoke_key(key_idx);
> > +
> > + if (flags & IMX_SRK_REVOKE_KEY_PERMANENT)
> > + ops->permanent_write_enable(0);
> > +
> > + return ret;
> > +}
> > diff --git a/include/hab.h b/include/hab.h
> > index 2cef3841d149..fd32bff15ef8 100644
> > --- a/include/hab.h
> > +++ b/include/hab.h
> > @@ -42,6 +42,11 @@ static inline int habv4_get_state(void)
> > * fuses so that the key hash can not be modified.
> > */
> > #define IMX_SRK_HASH_WRITE_LOCK BIT(2)
> > +/*
> > + * Revoke the SRK key permanently, without the flag only shadow registers are
> > + * written.
> > + */
> > +#define IMX_SRK_REVOKE_KEY_PERMANENT BIT(3)
> >
> > bool imx_hab_srk_hash_valid(const void *buf);
> > int imx_hab_write_srk_hash(const void *buf, unsigned flags);
> > @@ -51,5 +56,6 @@ int imx_hab_read_srk_hash(void *buf);
> > int imx_hab_lockdown_device(unsigned flags);
> > int imx_hab_device_locked_down(void);
> > int imx_hab_print_status(void);
> > +int imx_hab_revoke_key(unsigned key_idx, unsigned flags);
> >
> > #endif /* __HABV4_H */
> > diff --git a/include/mach/imx/ocotp-fusemap.h b/include/mach/imx/ocotp-fusemap.h
> > index c4f94e61e8f8..e6fa96b40ba9 100644
> > --- a/include/mach/imx/ocotp-fusemap.h
> > +++ b/include/mach/imx/ocotp-fusemap.h
> > @@ -57,5 +57,6 @@
> > #define MX8M_OCOTP_SRK_LOCK (OCOTP_WORD(0x400) | OCOTP_BIT(9) | OCOTP_WIDTH(1))
> > #define MX8M_OCOTP_SEC_CONFIG_1 (OCOTP_WORD(0x470) | OCOTP_BIT(25) | OCOTP_WIDTH(1))
> > #define MX8MQ_OCOTP_DIR_BT_DIS (OCOTP_WORD(0x470) | OCOTP_BIT(27) | OCOTP_WIDTH(1))
> > +#define MX8M_OCOTP_SRK_REVOKE (OCOTP_WORD(0x670) | OCOTP_BIT(0) | OCOTP_WIDTH(4))
> >
> > #endif /* __MACH_IMX_OCOTP_FUSEMAP_H */
> > --
> > 2.39.2
> >
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
next prev parent reply other threads:[~2024-06-25 8:08 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-13 13:09 [PATCH 1/9] i.MX: HABv4: fix SRK_LOCK for i.MX8M devices Marco Felsch
2024-06-13 13:09 ` [PATCH 2/9] nvmem: ocotp: add support to get/set srk_revoke sticky bit Marco Felsch
2024-06-13 13:09 ` [PATCH 3/9] nvmem: ocotp: add support to query the field-return " Marco Felsch
2024-06-13 13:09 ` [PATCH 4/9] hab: convert flags to use BIT() macro Marco Felsch
2024-06-13 13:09 ` [PATCH 5/9] i.MX: HAB: add imx_hab_revoke_key support Marco Felsch
2024-06-14 11:57 ` Sascha Hauer
2024-06-25 8:07 ` Marco Felsch [this message]
2024-06-13 13:09 ` [PATCH 6/9] i.MX: HABv4: add more i.MX8M fuse defines Marco Felsch
2024-06-13 13:09 ` [PATCH 7/9] i.MX8M: HABv4: add an option to allow key revocation Marco Felsch
2024-06-13 13:09 ` [PATCH 8/9] i.MX8M: HABv4: add option to allow burning the field-return fuse Marco Felsch
2024-06-13 13:09 ` [PATCH 9/9] i.MX: HAB: add imx_hab_field_return support Marco Felsch
2024-06-14 7:50 ` [PATCH 1/9] i.MX: HABv4: fix SRK_LOCK for i.MX8M devices Sascha Hauer
2024-06-14 10:16 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240625080720.hxw7b2ntio5vrhba@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox